个人工具

UbuntuHelp:BinaryDriverHowto/Nvidia

来自Ubuntu中文

Wikibot（讨论 | 贡献）2008年5月9日 (五) 18:47的版本

跳转至： 导航, 搜索
Geographylogo.png 文章出处: 

https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia

Geographylogo.png 点击翻译: 

English  • 中文

请不要直接编辑翻译本页，本页将定期与来源同步。


This guide is for installing the NVIDIA closed source binary drivers on a system running an NVIDIA graphics card. For other graphics cards refer to the BinaryDriverHowto.

Prerequisites

  • The command lspci | grep -i nvidia prints out a line of text
  • You want one or more of the following: hardware-accelerated 3D, TV-Out support, dual head support

Free alternative

There is Nouveau: an open source 3D acceleration for nVidia cards. Currently (2007), there is 2D-support, and a very limited 3D support for extremely lucky developers. See http://nouveau.freedesktop.org/wiki/. The users that have installed the proprietary driver can help the development of Nouveau, by sending information about their cards, see http://nouveau.freedesktop.org/wiki/REnouveauDumps.

Installation

Kubuntu 7.10 using the 'Restricted Drivers Manager'

As of Kubuntu 7.10 (Gutsy Gibbon) the recommended way to install the binary driver is to open System Settings KMenu → System Settings, go to the Advanced tab and click Restricted Drivers. Then click the Administrator Mode button and check the box marked Enable to install the driver. This should install the right package for your card and set it up for you.

Ubuntu 7.04 using 'Restricted Devices Manager'

As of Ubuntu 7.04 (Feisty Fawn) the recommended way to install the binary drivers is to use System → Administration → Restricted Devices Manager. This will try and automatically choose the correct version out of:

  • nvidia-glx-legacy (corresponds to the 71xx driver)
  • nvidia-glx (which corresponds to the 96xx driver)
  • nvidia-glx-new (which at the time of writing corresponded to the 97xx driver)

If your card does not appear in this list of cards known by Ubuntu 7.04 NVIDIA binary drivers (e.g. the 8600GT) then there is no Ubuntu 7.04 supported binary driver. For unsupported workarounds try the links in seealso See Also. Restricted Devices Manager may not work properly on machines that have previously used third party tools like 'envy' to install previous drivers

Kubuntu 7.04

Installing the driver

Kubuntu Feisty Fawn doesn't' have the Restricted Devices Manager so you have to install the packages manually. Open Adept K-Menu → System → Adept Manager and in the Search box put in nvidia-glx. You should see a few packages including nvidia-glx-new, nvidia-glx and nvidia-glx-legacy, use the link above to find the right driver for your card. Select the package for the driver you need to install (if you don't have linux-restricted-modules you should also select that package for install).

Activating the driver

Once the driver is installed you need to set the system to use the driver. Open Konsole from K-Menu → System → Konsole and enter the command 
sudo nvidia-xconfig

That will set the driver to be used from now on. To start using the driver you will need to logout and select Restart X Server from the menu, or press Alt+E

Common Problems

Low Screen Resolutions

Often screen resolutions on offer are far lower than those offered with the open source driver. The NVIDIA binary driver seems to be very weak at reliably probing this information from the monitor and relies on additional information in xorg.conf. In Feisty, this information is not written into xorg.conf by default. See this launchpad bug talking about lost resolutions when using the NVIDIA binary driver along with FixVideoResolutionHowto for further details and potential workarounds.

Screen Blanks/Monitor Turns Off

Using a laptop with a Ge``Force Go card, or connecting the sole display via DVI on a dual-head system sometimes results in the screen not receiving a picture. This is caused by the driver outputting video to the VGA port on the graphics card, instead of DVI. The usual hint that you have this problem is when you hear the startup sound but nothing appears on the screen. If you do not hear any sound, you are more than likely experiencing unrelated problems. This is a known bug, and can be resolved by editing your /etc/X11/xorg.conf file:

  • Switch to the console (Try using ctrl+alt+F1, or reboot and select recovery mode from the GRUB menu.)
  • Use your text editor to open /etc/X11/xorg.conf. (try sudo nano /etc/X11/xorg.conf)
  • Find the line that says Section "Screen"
  • Insert a new line that says Option "UseDisplayDevice" "DFP".
  • Save the file. If you had to restart into revocery mode, type reboot, otherwise restart your display using sudo /etc/init.d/gdm restart.

Old Installs Conflicting

If either of nvidia-glx-legacy/nvidia-glx-new are installed a dotfile is created in /lib/linux-restricted-modules/ . Even after these packages are uninstalled the dotfile will remain and may frustrate efforts to use the nvidia-glx package. See this launchpad bug about the hidden file not being removed when nvidia-glx-new is uninstalled (also applies if nvidia-legacy is removed) for details.

Other

If the above fails try checking the troubleshooting Troubleshooting at the end of this page. If this still fails, or you are using a version of Ubuntu older than 7.04 or you wish to configure things manually then please read on. Please note: Any problems that occur after installing drivers not provided by Ubuntu repositories should not be reported to the launchpad bug area. If the drivers were downloaded from the NVIDIA web site then the NVIDIA Linux web forum is an appropriate place to report issues. If a third party installer was used please contact the third party for support. Other places for manual driver support can be found on the Community Support page.

Ubuntu/Kubuntu 6.10 and earlier

Enable restricted packages

  • Note: If you are running Ubuntu/Kubuntu 6.10 (Edgy Eft) or later, the Restricted repositories might already be enabled.

The NVIDIA drivers are in the "restricted" section of the Ubuntu package repository, so before you will be able to install the drivers, you must enable this section on your system. If you are following the MythTV setup guide this should already be done.

In Ubuntu
  1. Select the System menu at the top of the screen.
  2. Select Administration then Synaptic Package Manager. Enter your password when prompted.
  3. In the package manager, select the Settings menu, then Repositories.
  4. In the Software Preferences dialog that comes up, click the Add button.
  5. In the Edit Repository dialog, ensure that the Restricted copyright box is checked, then press OK.
  6. Press OK to close the Software Preferences dialog, when Synaptic asks you to reload the package database, say yes.
In Kubuntu
  1. Open Adept Package Manager K-Menu → System → Adept Manager and enter your password.
  2. Go to File → Manage Repositories and make sure that a line similar to deb http://archive.ubuntu.com/ubuntu main restricted exists, if not put that line in the New Repository box and click "Add" then "Apply".
  3. You'll need to click "Fetch Updates" after you add the repository to apply the change.

You now have access to the many additional packages in the restricted section, including the NVIDIA driver packages.

Install and activate drivers

In Ubuntu

Packages may be installed by right-clicking on the package and selecting Mark for Installation.

  1. Click the Search button and search for "linux-restricted-modules". You must have restricted modules enabled (see above).
  2. Find the appropriate package for your kernel. For example, if you have linux-image-amd64-k8 installed, then you should install linux-restricted-modules-amd64-k8. Selecting one will also install nvidia-kernel-common. (Note: you have to select the restricted modules first because the nvidia-glx package automatically installs the i386 one - and if you have a generic kernel image, the X will not work.)
  3. Click the Search button and search for "nvidia-glx".
  4. You will install either nvidia-glx-legacy or nvidia-glx. If your graphics card is at the end of this list of cards (marked as "legacy"), you will need to install nvidia-glx-legacy. Otherwise, install nvidia-glx.
  5. If you are going to compile 3D applications, install nvidia-glx-dev. (You probably won't need this)
  6. Click the Apply button to install the new packages.
  7. Once Synaptic has finished applying your changes, exit the application.
  8. Select the Applications menu at the top of the screen, then Accessories, then Terminal, then proceed to the activating Activating The Driver Section.
In Kubuntu

Packages may be installed by right-clicking on the package and selecting Request Install.

  1. In the Search box type "linux-restricted-modules". You must have restricted modules enabled (see above).
  2. Find the appropriate package for your kernel. For example, if you have linux-image-amd64-k8 installed, then you should install linux-restricted-modules-amd64-k8. Selecting one will also install nvidia-kernel-common. (Note: you have to select the restricted modules first because the nvidia-glx package automatically installs the i386 one - and if you have a generic kernel image, the X will not work.)
  3. In the Search box search for "nvidia-glx".
  4. You will install either nvidia-glx-legacy or nvidia-glx. If your graphics card is at the end of this list of cards (marked as "legacy"), you will need to install nvidia-glx-legacy. Otherwise, install nvidia-glx.
  5. If you are going to compile 3D applications, install nvidia-glx-dev. (You probably won't need this)
  6. Click the Apply Changes button to install the new packages.
  7. Once Adept has finished applying your changes, exit the application.
  8. Open Konsole from K-Menu → System → Konsole, then procede to the activating Activating The Driver Section.

Anchor(activating)

Activating the Driver

10. In the terminal window, if you are running Ubuntu/Kubuntu 6.10 Edgy, type the following: 

sudo nvidia-xconfig

If you are running an earlier version, type the following instead: 

sudo nvidia-glx-config enable

11. Close all your applications, then logout and choose Restart X Server from the log-in screen menu, or restart your computer, to restart the X server. If you see an NVIDIA splashscreen, your drivers are properly installed.

NVIDIA Legacy Driver

The above instructions did not work for me in Edgy on a Ge``Force 1 using the legacy drivers nvidia-glx-legacy 1.0.7184+2.6.17.6-1 I had to manually edit /etc/X11/xorg.conf and change 

 Section "Device"
        Identifier      "NVIDIA Corporation NV10DDR [GeForce 256 DDR]"
        Driver          "nv"
        BusID           "PCI:1:0:0"
EndSection

to 

 Section "Device"
        Identifier      "NVIDIA Corporation NV10DDR [GeForce 256 DDR]"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
EndSection

If Driver "nvidia" is not found in xorg.conf then attempting to modprobe nvidia will result in an error message (thus sudo nvidia-glx-config enable would not work for me). After this change, to allow OpenGL programs to run the following had to be added to the bottom of /etc/X11/xorg.conf : 

 Section "Extensions"
        Option  "Composite" "Disable"
EndSection

otherwise the following error occurred when running GL programs like glxinfo: 

Xlib: extension "GLX" missing on display ":0.0".
Segmentation fault

This is not documented anywhere in the the legacy drivers (i.e. there is no mention of this in /usr/share/doc/nvidia-glx-legacy/*) but thankfully the following warning will appear in /var/log/Xorg.0.log: 

(EE) GLX is not supported with the Composite extension

By default Composite is turned on and this will prevent OpenGL from working - the above stanza simply turns Composite off. These steps are only needed for the legacy driver. More information about this problem can be found in the launchpad bug about GLX being disabled on legacy drivers.

Remove the NVIDIA logotype

If you want to get rid of the NVIDIA logotype that shows up before your login screen you need to perform some manual edits in the Xorg configuration file.

  1. Select the Applications menu at the top of the screen, then Accessories and then Terminal.
  2. Type the following:
gksudo gedit /etc/X11/xorg.conf

or if you are using Kubuntu: 

kdesu kate /etc/X11/xorg.conf
  1. Find the line Driver "nvidia" in the Device section
  2. Just after this line, add
Option		"NoLogo"
  1. Save the file and exit
  2. Close all your applications, then press Ctrl-Alt-Backspace to restart the X server. If the logotype is gone and everything seems to work you are done.

Anchor(troubleshooting)

Troubleshooting

  • Some people have reported a bug where the TTYs are blank while the system is booting (see Launchpad bug about blank ttys when using vesafb). This issue was fixed in Ubuntu 8.04.
  • It seems that a reboot is sometimes necessary for these changes to take effect. If 3D acceleration isn't working, try this first.
  • If 3D acceleration still isn't working, be sure that you have the right version of linux-restricted-modules installed. It must match the version of the running kernel.
  • If you have the right version of linux-restricted-modules installed and 3D acceleration still isn't working, open your /etc/X11/xorg.conf file for editing with gksudo gedit /etc/X11/xorg.conf or kdesu kate /etc/X11/xorg.conf if using Kubuntu. Be sure that the Driver entry under Section "Device" is set to "nvidia".
  • If suspend/hibernation no longer works see NvidiaLaptopBinaryDriverSuspend (this applies to desktops too).
  • If you have successfully enabled the binary driver but experience lockups/freezes after a few minutes under Ubuntu 7.04 or later, it might be due to the driver failing to cope with CPU speed changes. See this launchpad bug about lockups with a white screen and black lines when CPU speed scaling is on.
  • If you are using nvidia-glx/nvidia-glx-new and the refresh rate appears wrong (or different to that actually reported by your monitor) in gnome-display-properties, you are probably seeing the effects of the Dynamic``Twin``View feature. See this launchpad bug about being unable to "set" a proper screen refresh rate for details of this behaviour.
  • If you get an error while loading NVIDIA module try to rebuild module dependencies by running depmod:
sudo depmod
  • If you're feeling frisky and decide to fiddle around with the X Server Options for your Device in /etc/X11/xorg.conf and Firefox refuses to load (returns segmentation fault when launched from a terminal), this line may be the culprit:
Option "NoRenderExtension" "On"
Either comment it out (using a # at the beginning the line) or set it to Off.
  • If you have problems with video playback, e.g. in mplayer, gxine, or mythtv frontend with a legacy card, it may be due to too high a color depth (e.g. using NT6 Vanta/Vanta LT "nvidia" driver, I experienced flickering vertical bars & blue screen flashing). To fix this, manually edit /etc/X11/xorg.conf and change DefaultDepth to 16.
  • You may need to activate the "kernel framebuffer device interface" in X server. Copy/paste the below command into the terminal. The terminal will then start stepping you through each configuration setting. Most of the settings can be left at their defaults by pressing the ENTER button, but when you get to "Select the desired X server driver" (question 2), make sure to select "nvidia" and NOT "nv". At question 7 ("Activate kernel framebuffer device interface?") select "yes". Finish the rest of the questions (the rest of the settings can be left at their defaults) and then restart X server (or just restart your computer). If, when you reboot, you can't see the login screen, but instead get a message saying "X server failed to start (etc. etc.)", you will start in text mode (white text on black background) and it will ask you to login. After logging you will still be in text mode. Retype the same command below (make sure to write it down!) and then the configuration sequence will start again. This time at the "Activate kernel framebuffer device interface?") select "no" then restart your computer and your login screen will be restored.
sudo dpkg-reconfigure xserver-xorg

syslog contains entries like the following: 

NVRM: RM/client version mismatch!!
NVRM:    aborting to avoid catastrophe!

Xorg.0.log contains entries like the following: 

(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!

lsmod | grep nvidia reports that the nvidia kernel module is loaded. If removing and reinserting the nvidia kernel module allows X to go ahead and start, it is possible to accomplish this at system start by making this the first command under the start) case in the gdm (or other display manager) init script, like so: 

case "$1" in
  start)
        ##hack to deal with broken nvidia km not loading right###
        rmmod nvidia && modprobe nvidia

Another way of fixing this is to add 

 
RUN+="/sbin/modprobe nvidia"

to /etc/udev/rules.d/90-modprobe.rules

Anchor(seealso)

See Also

NvidiaManual - Guide to installing the official NVIDIA driver .pkg from the NVIDIA website on Ubuntu. Explains the drawbacks and benefits of manual installation and how to safely avoid conflicts with the Ubuntu provided NVIDIA binary drivers. NvidiaMultiMonitors

取自“https://wiki.ubuntu.org.cn/index.php?title=UbuntuHelp:BinaryDriverHowto/Nvidia&oldid=82597”