UbuntuHelp:UbuntuAndVirtualPC2007

文章出处:

https://help.ubuntu.com/community/UbuntuAndVirtualPC2007

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

1. title Ubuntu and Virtual PC 2007

Introduction

This page describes how to install ISO images of Ubuntu 7.10 as Virtual Hard Drives for Microsoft Virtual PC 2007.

Ubuntu 7.10 Desktop Configuration

1. Create and start a Virtual Machine
2. Capture the relevant ISO Image
3. Use F6 to access Other Options
4. Remove "splash" and add "i8042.noloop clock=pit vga=791"
5. After the system is booted, select install and configure according to your preferences
6. If a message "Cannot access security updates" appears, just continue
7. Once finished, restart the system (note: you may have to use a VPC Reset)
8. Hit ESC at the Grub screen and select Recovery Mode
9. Issue the following commands:

9.1. Configure Xserver sudo dpkg-reconfigure xserver-xorg<
>

• X server driver: VESA
• Video modes: 800x600 and 1024x768 only
• Color depth: 16

9.2. Configure Grub sudo nano /boot/grub/menu.lst

• Add: i8042.noloop clock=pit vga=791

9.3. Configure Modules sudo nano /etc/modules

• Add: tulip
• Add: snd-sb16

9.4. Configure Splash Screen Resolution sudo nano /etc/usplash.conf<
>

• Amend: xres=1280 to xres=1024
• Amend: yres=1024 to yres=768

9.5. Rebuild Splash Screen sudo update-initramfs -u -k `uname -r` 10. Reboot 11. Sign on using your username and password 12. Go to System | Preferences | Power Management and set the Display to sleep "Never" 13. Go to System | Preferences | Screensaver Preferences and uncheck "Activate Screensaver when computer is idle" 14. Go to System | Administration | Network and select Wired Network then click Properties 15. Uncheck "Enable roaming mode" 16. Select Automatic configuration (DHCP) and click OK 17. Check the box next to Wired connection and close Reboot and confirm that your network is working, you can hear sounds, and the screen is displayed correctly.

Ubuntu 7.10 Server Configuration

1. Start VPC
2. Capture ISO Image
3. Reset if required
4. Set server name
5. System Clock is NOT set to UTC
6. Set up user details
7. Software selection: LAMP server, OpenSSH server
8. Set MySQL Root Password
9. Reboot

10. Sign on 11. Test the Installation 11.1. Linux lsb_release -a 11.1. Apache apache2 -v 11.2. MySQL mysql -V 11.3. PHP php --version 12. Shutdown Server sudo shutdown -P now

Issue with Network Configuration

Sometimes after the initial reboot, especially if you are using a differencing hard drive where the base is read only, the Ethernet adapter is no longer recognised.

1. Edit network details

sudo /etc/network/interfaces

• Amend eth0 to eth1

1. Restart networking

sudo /etc/init.d/networking restart This should fix it.

---