个人工具

“Ubuntu 9.10 发行注记”的版本间的差异

来自Ubuntu中文

跳转至: 导航, 搜索
3.5.1 Enabling Ctrl-Alt-Backspace for Ubuntu
3.5.1 开启 Ubuntu Ctrl-Alt-Backspace 组合键功能
第82行: 第82行:
  
 
As a result, enabling or disabling the Ctrl+Alt+Backspace shortcut can now be done easily from the desktop.
 
As a result, enabling or disabling the Ctrl+Alt+Backspace shortcut can now be done easily from the desktop.
 +
 +
===3.5.1 Enabling Ctrl-Alt-Backspace for Ubuntu===
 +
 +
#Select "System"->"Preferences"->"Keyboard"
 +
# Select the "Layouts" tab and click on the "Layout Options" button.
 +
# Select "Key sequence to kill the X server" and enable "Control + Alt + Backspace".
 +
  
 
===3.5.1  开启 Ubuntu Ctrl-Alt-Backspace 组合键功能===
 
===3.5.1  开启 Ubuntu Ctrl-Alt-Backspace 组合键功能===

2009年10月22日 (四) 14:25的版本

原请求——来自论坛

请分段翻译,不要改动原文,以两次回车分离译文和原文)。

1.System Requirements

1.系统硬件要求

The minimum memory requirement for Ubuntu 9.10 is 256 MB of memory. Note that some of your system's memory may be unavailable due to being used by the graphics card. If your computer has only the minimum amount of memory, the installation process will take longer than normal, but will complete successfully, and the system will perform adequately once installed.

Ubuntu 9.10至少需要256MB内存。需要注意的是,电脑部分内存可能因为被显卡占用而无法使用。如果电脑仅有最低要求的内存,安装过程可能会比较长一些。当然,安装也能完成,系统也能正常运行。

Systems with less memory may be able to select "Install Ubuntu" from the boot menu to run just the installer, rather than the whole desktop, or may be able to use the alternate install CD.

内存较低的电脑,可以通过启动菜单的"Install Ubuntu"只运行安装程序,而不是启动整个桌面。也可以用alternate install CD来进行字符界面安装。

2.Installation

2.安装

2.1 Recommended packages installed by default

2.1默认安装推荐的软件包

In accordance with the Debian Policy Manual (which says "The 'Recommends' field should list packages that would be found together with this one in all but unusual installations"), the package management system now installs packages listed in the Recommends: field of other installed packages as well as Depends: by default. If you want to avoid this for specific packages, use apt-get --no-install-recommends; if you want to make this permanent, set APT::Install-Recommends "false"; in /etc/apt/apt.conf. Be aware that this may result in missing features in some programs.

为了与Debian策略手册(其指出“'推荐'区域应当列出与此在一起的软件包,除了特别的安装”)一致,软件包管理系统现在默认安装推荐列表中的软件包和其他安装的软件包及相关依赖。如果您希望对特殊的软件包避免如此,使用apt-get --no-install-recommends;如果您希望永远如此,在/etc/apt/apt.conf里设置APT::Install-Recommends "false"。注意,这可能导致一些程序失去某些特性。

(This change was made in Ubuntu 8.10.)

(这个改变在Ubuntu 8.10作出。)

2.2Hibernation may be unavailable with automatic partitioning

2.2自动分区模式可能导致“休眠”功能失效

The default partitioning recipe in the installer will in some cases allocate a swap partition that is smaller than the physical memory in the system. This will prevent the use of hibernation (suspend-to-disk) because the system image will not fit in the swap partition. If you intend to use hibernation with your system, you should ensure that the swap partition's size is at least as large as the system's physical RAM. (354126)

某些情况下,安装程序中的自动分区模式划出的swap分区可能会小于物理内存,从而在系统快照大于swap分区的情况下导致其无法保存,这也就意味着休眠(挂起到硬盘)将无法使用。如果想启用休眠功能的话,请确保swap分区不小于电脑的物理内存。


2.3 Other OS options not shown in boot menu when installing with Ubuntu 9.10 RC

2.3安装Ubuntu 9.10 RC后导致其他操作系统在启动菜单消失的处理方法

After installation from the Ubuntu 9.10 Release Candidate, other installed operating systems are not correctly displayed in the boot menu. To correct this, users should run sudo update-grub from the commandline after rebooting to their installed Ubuntu system. (456776)

当安装完Ubuntu 9.10 RC后,其他已安装的操作系统可能会在启动菜单中无法正确显示。对此,用户需要首先重启刚安装完毕的系统,然后再命令行界面中运行“sudo update-grub”。

3.Upgrading

3.升级

Users of Ubuntu 9.04 can upgrade to Ubuntu 9.10 by a convenient automated process. Users of older Ubuntu releases need to upgrade to Ubuntu 9.04 first, and then to 9.10. Complete instructions may be found at http://www.ubuntu.com/getubuntu/upgrading.

Ubuntu 9.04的用户可以通过一个方便自动的过程升级到Ubuntu 9.10。Ubuntu更早发行版的用户需要先升级到Ubuntu 9.04,然后到 9.10。完整的知道可以在 http://www.ubuntu.com/getubuntu/upgrading 找到。

Kubuntu users can upgrade directly from Kubuntu 8.04 to Kubuntu 9.10. Users upgrading in this way are advised to also read the release notes for Ubuntu 8.10 and for Ubuntu 9.04, as the issues described there will in most cases also apply.

Kubuntu用户可以直接由Kubuntu 8.04升级到Kubuntu 9.10。建议通过这种方式升级的用户也阅读一下Ubuntu 8.10和Ubuntu9.04的发行注记,因为那里描述的问题将在许多情况下都适用。

3.1Setting wireless regulatory domain via module option no longer supported

Ubuntu 9.10 enables the CRDA wireless regulatory framework for controlling which wireless channels are usable and visible in a particular location. If you previously had to use the module option similar to that below in /etc/modprobe.d/options to allow access to certain channels in your locality then you may find that wireless will not function at all:

  • options cfg80211 ieee80211_regdom=EU

You should remove this kernel module option on upgrade to Ubuntu 9.10 and use the iw reg command instead.

(This change was made in Ubuntu 9.04.)

3.2 Upgrade from beta must be triggered manually

A bug in the apt package included in the Ubuntu 9.10 Beta prevents automatic notification of available package updates. Users who have installed or upgraded to Ubuntu 9.10 prior to the Release Candidate should ensure that updates are being made available by running update-manager manually, clicking Check, and installing the presented updates. (449535)

3.3 X server crashes when using a wacom tablet

The wacom driver in Ubuntu 9.10 supports automatic configuration, but it conflicts with manual device entries for wacom tablets in /etc/X11/xorg.conf, causing the X server to crash either on startup or shutdown. Please comment out or remove the entries from xorg.conf to get rid of the crashes. (358643)

3.4 Kubuntu may keep unneeded guidance power package

The kubuntu upgrade may leave the no longer needed packages "kde-guidance-powermanager" or "guidance-power-manager" installed. Those can be removed.

3.5 Ctrl-Alt-Backspace disabled by default in Xorg, configured via XKB

Since Ubuntu 9.04, the Ctrl-Alt-Backspace key combination to force a restart of X is now disabled by default, to eliminate the problem of accidentally triggering the key combination. In addition, the Ctrl-Alt-Backspace option is now configured as an X keymap (XKB) option, replacing the X server "DontZap" option and allowing per-user configuration of this setting.

As a result, enabling or disabling the Ctrl+Alt+Backspace shortcut can now be done easily from the desktop.

3.5.1 Enabling Ctrl-Alt-Backspace for Ubuntu

  1. Select "System"->"Preferences"->"Keyboard"
  2. Select the "Layouts" tab and click on the "Layout Options" button.
  3. Select "Key sequence to kill the X server" and enable "Control + Alt + Backspace".


3.5.1 开启 Ubuntu Ctrl-Alt-Backspace 组合键功能

  1. 选择“系统”->"首选项"-"键盘";
  2. 选择"布局"标签并点击"布局设置"按钮;
  3. 选择“使用组合键结束X服务” 并允许“Control + Alt + Backspace”。

3.5.2 Enabling Ctrl-Alt-Backspace for Kubuntu

  • Click on the Application launcher and select "System Settings"
  • Click on "Regional & Language".
  • Select "Keyboard Layout".
  • Click on "Enable keyboard layouts" (in the Layout tab).
  • Select the "Advanced" tab. Then select "Key sequence to kill the X server" and enable "Control + Alt + Backspace".

For further information, see: https://wiki.ubuntu.com/X/Config/DontZap

3.6 Change in notifications of available updates

Ubuntu 9.10 launches update-manager directly to handle package updates, instead of displaying a notification icon in the GNOME panel. Users are notified of security updates on a daily basis, but for updates that are not security-related, users will only be prompted once a week.

Users who wish to continue receiving update notifications in the previous manner can restore the earlier behavior using the following command:

gconftool -s --type bool /apps/update-notifier/auto_launch false

(This change was made in Ubuntu 9.04.)

4. Other known issues

4.1 Switching to ext4 requires manually updating grub

If you choose to upgrade your / or /boot filesystem in place from ext2 or ext3 to ext4 (as documented on the ext4 wiki), then you must also use the grub-install command after upgrading to Ubuntu 9.04 to reinstall your boot loader. If you do not do this, then the version of GRUB installed in your boot sector will not be able to read the kernel from the ext4 filesystem and your system will fail to boot.

4.2 Avahi will not start if a .local domain is present

The avahi-daemon package, which implements the mDNS "zeroconf" standard, includes a check to avoid running when a conflicting .local DNS domain is present. It is reported that some ISPs advertise such a .local domain on their networks, which will leave Ubuntu 9.10 hosts unable to see names advertised on the local network (327362).

To force the use of mDNS on a network configured this way, users can run the commands:

sudo sed -i -e'/AVAHI_DAEMON_DETECT_LOCAL/s/1/0/' /etc/default/avahi-daemon sudo service avahi-daemon start

4.3 Kubuntu GUI package manager does not warn about installing from unsigned package repositories

The kpackagekit package manager used in Kubuntu 9.10 does not notify users if the packages they are installing come from repositories that are not secured with PGP. Users who have unsigned package repositories in their /etc/apt/sources.list configuration and wish to be informed of any packages installed from these sources should use the apt-get commandline tool as a workaround. (256245)

4.4 Amarok will not offer to download additional codecs when running Kubuntu from the live CD

When started from the live session, Amarok will not offer to download additional media codecs when needed, so, for example, it will be unable to play MP3 files. This will work normally after the system is installed to the hard disk. (362538)

4.5 Sparc not supported by Ubuntu 9.10

The upstart init system in Ubuntu 9.10 fails to work on the sparc architecture due to an undiagnosed SIGBUS error. Users of Ubuntu on sparc are advised to remain on Ubuntu 9.04 instead of upgrading to 9.10. Assistance in resolving this architecture-specific bug for Ubuntu 10.04 is welcome. (436758)