UbuntuHelp:WifiDocs/Device/NetgearWG511andNdiswrapper

文章出处:

https://help.ubuntu.com/community/WifiDocs/Device/NetgearWG511andNdiswrapper

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

Introduction

This document sepecifies installation instructions to make the Netgear WG511 network card work with Ubuntu 6.06 (Dapper Drake). I have spent a great deal of time on this miss-adventure. So I hope you can save some by following my instructions.

Firstly, there are two types of cards that Netgear sells as WG511 one is "Made in Taiwan" the other is "Made in China" I have used both, the Taiwan card works out of the box with Prism54 driver and if you have one "Made in Taiwan" you won't be reading this. The "Made in China" card can be made to work using ndiswrapper and the driver provided in the Netgear CD, just use the Windows 2000 driver OR use the correct Marvell driver.

Prepration

First lets make sure you have the right card, just do a

$lspci 
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03)

You will need the same version of the kernel and kernel-headers,

apt-get install build-essential fakeroot linux-headers-$(uname -r)

if the headers for kernel you are running is not avaliable in the universe, I will suggest you get a kernel which is in the Universe. I used,

apt-get install linux-image-2.6.11-1-k7 linux-headers-2.6.11-1-k7

The Driver

Do not install the Windows XP driver, Use the Windows 2000 driver provided with the Netgear CD. Follow the instructions at [SetupNdiswrapperHowto] and use the Windows 2000 driver when asked to.

WARNING: This card does not seem to work ndiswrapper 1.16 and above - the card refuses to connect - you need to use ndiswrapper 1.15 until the problem is fixed.

NOTE: If you have the Netgear WG511v2 card, you can use ndiswrapper 1.8. I also have to use the 686 kernel because ndiswrapper would not work with the 386 kernel. This is being used with a Dell C810 laptop with Dapper Drake.

For better performance, you can use the mrv8335 drivers, which are the drivers for the chipset of the wireless card. They can be found here: http://people.freebsd.org/~wpaul/marvell/

I've tested both of these drivers, and the mrv8335 drivers make the card work *much* faster than the drivers on the Netgear CD.

---