“UbuntuHelp:WacomTroubleshooting”的版本间的差异

2007年5月24日 (四) 14:26的版本

文章出处:

https://help.ubuntu.com/community/WacomTroubleshooting

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

This section is intended to collect useful advices and solutions for configuring Wacom Tablets under Ubuntu 6.06 Dapper Drake when the method recommended in https://wiki.ubuntu.com/Wacom doesn't work.

Editing /etc/X11/xorg.conf

• Here is an extract of Dapper Drake default xorg.conf relating to Wacom USB tablets, that you can use if these lines weren't automatically added :

Section "InputDevice"
Driver        "wacom"
Identifier    "stylus"
Option        "Device"        "/dev/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "stylus"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "eraser"
Option        "Device"        "/dev/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "eraser"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "cursor"
Option        "Device"        "/dev/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "cursor"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

You should replace the 3 /dev/wacom occurences to point to /dev/input/wacom

Here is the above section of /etc/X11/xorg.conf after modification :

Section "InputDevice"
Driver        "wacom"
Identifier    "stylus"
Option        "Device"        "/dev/input/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "stylus"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "eraser"
Option        "Device"        "/dev/input/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "eraser"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "cursor"
Option        "Device"        "/dev/input/wacom"          # Change to 
# /dev/input/event
# for USB
Option        "Type"          "cursor"
Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

• This lines are added in the section "ServerLayout"

	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"

If they are not present, you can paste them into the section, which will look like this :

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus" "SendCoreEvents"
	InputDevice     "cursor" "SendCoreEvents"
	InputDevice     "eraser" "SendCoreEvents"
EndSection