个人工具

“UbuntuHelp:SSHFS”的版本间的差异

来自Ubuntu中文

跳转至: 导航, 搜索
第30行: 第30行:
 
Your ssh session will automatically log out if it is idle. To keep the connection active (alive) add this to '''/etc/ssh/ssh_config''' on the client.
 
Your ssh session will automatically log out if it is idle. To keep the connection active (alive) add this to '''/etc/ssh/ssh_config''' on the client.
 
<code><nowiki>ServerAliveInterval 5</nowiki></code>
 
<code><nowiki>ServerAliveInterval 5</nowiki></code>
This will send a "keep alive: signal to the server every 5 seconds. You can usually increase this interval and I use 120.
+
This will send a "keep alive" signal to the server every 5 seconds. You can usually increase this interval, and I use 120.
 
=== Links ===
 
=== Links ===
 
* This page is based off of [http://ubuntu.wordpress.com/2005/10/28/how-to-mount-a-remote-ssh-filesystem-using-sshfs/ this] howto.
 
* This page is based off of [http://ubuntu.wordpress.com/2005/10/28/how-to-mount-a-remote-ssh-filesystem-using-sshfs/ this] howto.
  
 
[[category:UbuntuHelp]]
 
[[category:UbuntuHelp]]

2008年4月23日 (三) 11:58的版本

Overview

Ssh is a secure protocol for communicating between machines. Sshfs is a tool that uses ssh to enable mounting of a remote filesystem on a local machine; the network is (mostly) transparent to the user. Because ssh authenticates connections, you can be sure that only those who should have access to remote directories can mount them (as long as everything is configured properly). Because ssh encrypts connections, no one can see your files as they are transferred over the network.

Installation and Setup

Simply install the sshfs package. The dependencies should be automatically installed too.

sudo apt-get install sshfs

Then add yourself to the fuse group. This is necessary so you can use the fusermount command, which is needed by the FUSE userland filesystem utility. If you don't do this, you will get permission errors. You must log out and log back in in order for the changes to take effect.

sudo adduser $USER fuse

Usage

Now, assuming that you have an ssh server running on a remote machine, simply run the sshfs command to mount the remote directory. In this example, the remote directory is /projects on remote host far. The local mount point is ~/projects.

sshfs $USER@far:/projects ~/projects

To unmount,

fusermount -u ~/projects

To add it to your /etc/fstab,

sshfs#$USER@far:/projects    /home/$USER/remote    fuse    defaults    0 0

Note that you have to change $USER to your login name when editing fstab, but it is not necessary when typing commands (the shell does it for you in that case). One thing to be aware of is that your UID (User ID, the unique number of your user on a system) is not necessarily the same on the two hosts. When you ls -l, the user name associated with each file is printed in the third column. However, in the filesystem, only UIDs are stored, and ls simply looks up the UID and finds the user name associated with it. In Unix, UIDs are what matter, not the user names. So if you're 1000 on the local host and 1003 on the remote host, the sshfs mounted directory would show a different user name for your files. This is not a problem, though, because the ssh server on the remote machine is what is actually reading and writing files. So even though it shows up in ls -l as a different UID, any changes will be done through the ssh server on the remote host, which will use the correct UID for the remote machine. Problems may arise if you attempt to use a program that looks at UIDs of files (e.g. ls prints the wrong user name).

Keep Alive

Your ssh session will automatically log out if it is idle. To keep the connection active (alive) add this to /etc/ssh/ssh_config on the client. ServerAliveInterval 5 This will send a "keep alive" signal to the server every 5 seconds. You can usually increase this interval, and I use 120.

Links

  • This page is based off of this howto.