UbuntuHelp:Rsync

文章出处:

https://help.ubuntu.com/community/rsync

点击翻译:

English  • 中文

Introduction

This article is a part of the BackupYourSystem series. Please consult it for more introductory information. rsync is the primary means of folder synchronization for linux machines. Folder synchronization, is a process whereby folders at two different locations are synchronized to have the same data. This synchronization is modified by rules, instructing rsync how to copy the data, for instance to delete files not located in original folder being synchronized. The two folders can be local attached to the same machine, or performed over the local network with ssh. It is most useful for backing up large amounts of data that won't compress well, such as multimedia files.

rsync

Installation

The program rsync is usually installed on Ubuntu, be sure to check all the listed packages are installed before starting. In the rare case when it is not on your system, install the following packages: rsync xinetd ssh.

Using rsync with SSH for a Simple Backup

For backup over a network, it is strongly recommended to use SSH. It is much easier to configure than the rsync daemon. Local backup only requires rsync and read/write access to the folders being synchronized. Below you will find examples of commands that can be used to backup in either case. It should be noted, that a network sync can be performed locally so long as the folder is shared (say by Samba) and then mounted to the machine with folder1. This process gets around having to use ssh but is less secure and should only be used in secure private networks, like at your home. Local Backup

sudo rsync -azvv /home/path/folder1/ /home/path/folder2

Backup Over Network

sudo rsync --delete -azvv -e ssh /home/path/folder1/ [email protected]:/home/path/folder2

An explanation of above options to commands:

• --delete deletes files that don't exist on the system being backed up.(Optional)
• -a preserves the date and times, and permissions of the files (same as -rlptgoD).

. With this option rsync will: . Descend recursively into all directories (-r), . copy symlinks as symlinks (-l), . preserve file permissions (-p), . preserve modification times (-t), . preserve groups (-g), . preserve file ownership (-o), and . preserve devices as devices (-D).

• -z compresses the data
• -vv increases the verbosity of the reporting process
• -e specifies remote shell to use
• /folder1 and folder2 In the examples above, folder1 and 2 are placeholders for the directories to be synchronized. Folder1 is the original folder, and 2 is the new folder, or existing one to be brought in sync with the first. Replace them with the folders you'd like. A / was added after folder1 so that only the contents, rather than whole folder, would be moved into the second.

A complete synopsis of all the options with the rsync command can be found in the man pages under "Options Summary". The man page for rsync can also be found on linux.die.net Rsync has a graphical UI that simplifies configuration for new users, please consult the grsync section below. Alternatives are listed at the end.

Configuration of the rsync Daemon

It is strongly recommended to use ssh, this method is retained for those who for whatever reason cannot manage the above. It is more complicated and involves more steps, please pay attention. 1. Edit the file /etc/default/rsync to start rsync as daemon using xinetd. The entry listed below, should be changed from false to inetd.

  RSYNC_ENABLE=inetd

2. Create the file /etc/xinetd.d/rsync to launch rsync via xinetd. It should contain the following lines of text.

  service rsync
    {
        disable         = no
        socket_type     = stream
        wait            = no
        user            = root
        server          = /usr/bin/rsync
        server_args     = --daemon
        log_on_failure  += USERID
    }

3. Create the file /etc/rsyncd.conf configuration for rsync in daemon mode. The file should contain the following. In the file, user should be replaced with the name of user on the remote machine being logged into.

  max connections = 2
  log file = /var/log/rsync.log
  timeout = 300

  [share]
  comment = Public Share
  path = /home/share
  read only = no
  list = yes
  uid = nobody
  gid = nogroup
  auth users = user
  secrets file = /etc/rsyncd.secrets

4. Create /etc/rsyncd.secrets for user's password. User should be the same as above, with password the one used to log into the remote machine as the indicated user.

$ sudo vim /etc/rsyncd.secrets 
  user:password

5. This step sets the file permissions for rsyncd.secrets.

$ sudo chmod 600 /etc/rsyncd.secrets

6. Start/Restart xinetd

$ sudo /etc/init.d/xinetd restart

Testing

Run the following command to check if everything is ok. The output listed is just a sample, should be what is on your shared remote machine. Hostname can be replaced by the IP address of the machine.

$ sudo rsync user@hostname::share
  Password: 
  drwxr-xr-x        4096 2006/12/13 09:41:59 .
  drwxr-xr-x        4096 2006/11/23 18:00:03 folders

grsync

The program grsync is a GUI front for rsync. The simple interface of the GUI exposes many of the basic options usable with rsync and is useful for those not wishing to use the command line.

Installation

The program grsync does not come installed by default on Ubuntu or any other distrubtion but it is easily available from the main UbuntuHelp:Repositories. To get grsync ensure Universe section of the Ubuntu repositories is enabled in your Software Sources|Repositories/Ubuntu|Software Sources. Then to install this software in Ubuntu, install the following package: grsync.

Configuration

To start up grsync go through the following menus: Applications --> System Tools --> grsync. Upon start up you'll be presented with the main window, where all the configuration takes place. On this window are all of the options most users will ever need. To explain, the options will be listed and their effects mentioned.

• Sessions - This function is the same as profiles in others. Each session will store a different set of source and destination directories, as well as the configuration options associated with the folder pair. This allows for the synchronization of different sets of folders according to different options.
• Management of sessions is simple, simply push the Add button to add a new one. To delete, select the session you no longer want from the drop down and push Delete.
• Source and Destination - These two boxes list the two folders (technically referred to as directories) that will be synchronized. The top one is the Source and the bottom the Destination. So when you Execute the synchronization, the files from Source will be copied over to the Destination according to the options a user selects.
• To specify the directories either Browse for them from the GUI or type them in according to the standard path conventions.
• Switch - The universal reload sign located to the right of the Browse buttons is a handy button. It will instantly switch the Source with the Destination.
• Import and Export - After having configured sessions, a user may want to back them up for storage. To do so, simply go to the Sessions Menu at the top and select either Import or Export. The former will restore a session from a backup previously made, the latter will make a backup of the current session.
• Note: This backup function works on a per session basis. This means, each session you want to back up must be selected from the drop down and then backed up. If you have 3 different sessions, select each in turn and Export them. Same when importing sessions.
• Basic Options - Most users will find most of the options they will ever need here. The first four will preserve the properties of the files transferred. The others will modify how the files are copied. For more information on what each does specifically, hover your stationary cursor over the option and it will display a small explanation. The options checked are of course the ones that will be applied during the session.

• Advanced Options - This tab holds more options, many are useful and self-explanitory. For those not understood, tooltips will be displayed when the mouse remains over an option long enough.
• Additional Options - This entry box allows the input of additional options not presented in the GUI but known to the user. Use is suggested only for experienced users, inputting malformed options may have unexpected consequences.

Simulation and Execution

The last two buttons on the window are Simulation and Execute. The button for simulation is very useful when uncertain what will happen based on the options selected. The normal transfer dialog screen will pop up and in the main pane, a list of files that would have been copied over is listed. The user can then verify if this is as desired or make changes. Once the session is initiated with the Execute button, the dialog will appear again but this time it will actually process the folders accordingly. Ensure before pushing Execute that you are happy with the simulation.

Remote Backup

Backup over a network is possible, preferably the user should mount the network share to be backed up to prior to launching the program. The share would then be listed in the Browse GUI and could easily be added. There is no separate section for network, if more advanced features are required the user is encouraged to look at alternatives, of which there are many.

Alternatives

There are many alternatives, in various stages of development. For an incomplete list, see here.

---