“UbuntuHelp:Router/Madwifi”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
(未显示同一用户的3个中间版本) | |||
第5行: | 第5行: | ||
First, verify that your wireless network adapter requires the madwifi device drivers. | First, verify that your wireless network adapter requires the madwifi device drivers. | ||
Issue the following command: | Issue the following command: | ||
− | <pre><nowiki>sudo lspci | grep Atheros | + | <pre><nowiki> |
+ | sudo lspci | grep Atheros | ||
</nowiki></pre> | </nowiki></pre> | ||
If there is any output similar to that below, you should definitely install madwifi. | If there is any output similar to that below, you should definitely install madwifi. | ||
− | <pre><nowiki>00:0e.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) | + | <pre><nowiki> |
+ | 00:0e.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) | ||
</nowiki></pre> | </nowiki></pre> | ||
If there is no output, try looking through [http://madwifi.org/wiki/Compatibility] to see if your network adapter is supported. | If there is no output, try looking through [http://madwifi.org/wiki/Compatibility] to see if your network adapter is supported. | ||
== Installation == | == Installation == | ||
− | Navigate to [http://madwifi.org/] and download and extract the latest version of the madwifi drivers (0.9. | + | ==== Ubuntu 8.04 ==== |
− | <pre><nowiki>wget http:// | + | The drivers are in the restricted modules package; also see the `madwifi-tools` package. |
− | tar -xvzf madwifi-0.9. | + | <pre><nowiki> |
− | cd madwifi-0.9. | + | sudo apt-get install linux-restricted-modules madwifi-tools |
+ | </nowiki></pre> | ||
+ | ==== Ubuntu 7.10 ==== | ||
+ | Navigate to [http://madwifi.org/] and download and extract the latest version of the madwifi drivers (0.9.4 at the time of this writing) | ||
+ | <pre><nowiki> | ||
+ | wget http://internap.dl.sourceforge.net/sourceforge/madwifi/madwifi-0.9.4.tar.gz | ||
+ | tar -xvzf madwifi-0.9.4.tar.gz | ||
+ | cd madwifi-0.9.4 | ||
+ | </nowiki></pre> | ||
Download the necessary tools, compile and install the module | Download the necessary tools, compile and install the module | ||
− | <pre><nowiki>sudo apt-get install build-essential linux-headers-server | + | <pre><nowiki> |
+ | sudo apt-get install build-essential linux-headers-server | ||
make | make | ||
− | sudo make install</nowiki></pre> | + | sudo make install |
+ | </nowiki></pre> | ||
+ | === Setting Master Mode === | ||
<u>'''NOTE'''</u>: If you are plan on using this wireless network adapter in "master" mode (i. e. for the purposes of setting up a wireless router), create the file `/etc/modprobe.d/madwifi` and add the following to it: | <u>'''NOTE'''</u>: If you are plan on using this wireless network adapter in "master" mode (i. e. for the purposes of setting up a wireless router), create the file `/etc/modprobe.d/madwifi` and add the following to it: | ||
− | <pre><nowiki>options ath_pci autocreate=ap | + | <pre><nowiki> |
+ | options ath_pci autocreate=ap | ||
</nowiki></pre> | </nowiki></pre> | ||
This will tell madwifi to set your wireless device (ath0) to master mode. | This will tell madwifi to set your wireless device (ath0) to master mode. | ||
Finally, load the module | Finally, load the module | ||
− | <pre><nowiki>sudo modprobe ath_pci | + | <pre><nowiki> |
+ | sudo modprobe ath_pci | ||
</nowiki></pre> | </nowiki></pre> | ||
== Sources == | == Sources == | ||
− | + | <ol><li>[http://madwifi.org/wiki/UserDocs/FirstTimeHowTo MadWifi 'First Time User' HOWTO] | |
− | + | </li><li>[http://madwifi.org/wiki/UserDocs/Distro/Ubuntu MadWifi Ubuntu Notes] | |
− | + | </li><li>[http://madwifi.org/wiki/UserDocs/autocreate VAP Autocreation Upon modprobe ath_pci]</li></ol> | |
+ | |||
[[category:UbuntuHelp]] | [[category:UbuntuHelp]] |
2008年10月20日 (一) 00:31的最新版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
~+This guide is only applicable for server installations of Ubuntu. If you are running a desktop installation of Ubuntu, try WifiDocs/Driver/Madwifi and the MadWifi wiki for more information.+~
目录
Checking For Atheros Chipsets
First, verify that your wireless network adapter requires the madwifi device drivers. Issue the following command:
sudo lspci | grep Atheros
If there is any output similar to that below, you should definitely install madwifi.
00:0e.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
If there is no output, try looking through [1] to see if your network adapter is supported.
Installation
Ubuntu 8.04
The drivers are in the restricted modules package; also see the `madwifi-tools` package.
sudo apt-get install linux-restricted-modules madwifi-tools
Ubuntu 7.10
Navigate to [2] and download and extract the latest version of the madwifi drivers (0.9.4 at the time of this writing)
wget http://internap.dl.sourceforge.net/sourceforge/madwifi/madwifi-0.9.4.tar.gz tar -xvzf madwifi-0.9.4.tar.gz cd madwifi-0.9.4
Download the necessary tools, compile and install the module
sudo apt-get install build-essential linux-headers-server make sudo make install
Setting Master Mode
NOTE: If you are plan on using this wireless network adapter in "master" mode (i. e. for the purposes of setting up a wireless router), create the file `/etc/modprobe.d/madwifi` and add the following to it:
options ath_pci autocreate=ap
This will tell madwifi to set your wireless device (ath0) to master mode. Finally, load the module
sudo modprobe ath_pci