“UbuntuHelp:PortableDevices/WindowsMobile”的版本间的差异

2007年11月21日 (三) 18:18的版本

文章出处:

https://help.ubuntu.com/community/PortableDevices/WindowsMobile

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

Windows Mobile

Users of Windows Mobile 5, Windows Mobile 2003 and PocketPC can sync email, contacts, calender appointments with Evolution.

Ubuntu does not yet work with Windows Mobile 6 currently. Until that support comes, there are two possible solutions:

Using Windows Mobile 6's USB storage mode
Using a storage device that your computer can also read, such an an SD card (if your computer has a card reader) or Sandisk's SD+USB for file transfer.

Connecting to a Windows Mobile 5, 2003 or PocketPC Device

Plug in the device via the included USB cable.

Install the synce-dccm, synce-serial and librra0-tools packages. To sync with Evolution, you'll also need the multisync, synce-multisync-plugin, libmultisync-plugin-evolution and libmultisync-plugin-backup packages. See Installing Software. The packages installer will ask various questions about how to connect to your device:
- Leave the serial interface as "/dev/ttyUSB0"
- Leave the default local IP address "192.168.131.102"
- Leave the default remote IP address "192.168.131.201"
- Set the IP address of your DNS server to "192.168.0.1"

Make sure ports 5678, 5679 and 990 are not blocked by a firewall
Click Applications -> Accessories -> Terminal. In the Terminal window, run:

dccm
sudo synce-serial-start

Depending on your device you may have to run the sudo synce-serial-start command within a few seconds of powering the Windows Mobile device on. The computer should now show: synce-serial-start is now waiting for your device to connect. The Windows Mobile Device should appear connected, in a similar way to when connected via ActiveSync on Windows.

Synchronizing with Evolution

Click Applications -> Accessories -> Multisync
- Click New
  - - First plugin: SynCE Plugin

- - - Second plugin: Ximian Evolution 2

- - - Display Name: <whatever you what to call it>

- - - Data types to synchronize: Calendar + Addressbook + Tasks

to disconnect the Windows Mobile device:

- - - Shutdown Multisync

- - - "killall -HUP dccm" to kill the serial connection.

- - - As a last resort, run "synce-serial-abort", if the above command doesn't work.

Troubleshooting

If you forget to run "dccm" before synce-serial-start, power off the pocket pc and run

sudo rmmod ipaq
sudo rmmod ehci_hcd
sudo rmmod uhci_hcd
sudo rmmod usbserial

Note: these must be run in a certain order, try a different order if it doesn't work.

If syncronisation still doesn't work, close multisync and then run

synce-matchmaker create 1

If 1 doesn't work, try 2.

Wireless Modem

I have successfully used my XDA Exec as a wireless modem with my Laptop. This is how I got it to work(roughly) :

1. Start the Windows Mobile device in the wireless modem mode from Start-> Programs -> Wireless Modem

2. Now connect the USB cable to the computer.

3. In a Terminal, run

wvdialconf

to see if it detects it as a modem. If this doesn't work, edit the "/etc/wvdial.conf" file as follows:

[Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 115200 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Carrier Check = no Stupid Mode = no Phone = *99# Username = Password = New PPPD = yes ISDN = 0 Modem Type = Analog Modem

6. Now type "wvdial" in the command prompt, it should now connect.

Compatibilty

Devices that are known to work with this howto:

HP iPaq hx4150
HP iPaq rx3115
HP iPaq h2215/h2210
HP iPaq h1940
HP iPaq h1930
DELL Axim X3i & X30 & X50v
XDA IIs
i-mate JAM [windows ce 2003]
Acer n50 Premium
please add your devices to this list if it works for you

Troubleshooting

To check your Windows Mobile Device has been detected, click System' -> Administration -> System Log, then select messages. Alternatively, run dmesg in a terminal.

The results should look like the following:

[4312964.212000] usb 5-3.4: new full speed USB device using ehci_hcd and address 3
[4312966.410000] usbcore: registered new driver usbserial
[4312966.416000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
[4312966.419000] usbcore: registered new driver usbserial_generic
[4312966.419000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
[4312966.439000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
[4312966.439000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
[4312966.443000] ipaq 5-3.4:1.0: PocketPC PDA converter detected
[4312966.445000] usb 5-3.4: PocketPC PDA converter now attached to ttyUSB0
[4312966.445000] usbcore: registered new driver ipaq

Comment

1- STOP sl-modem-daemon :

PocketPC PDA ttyUSB1: PocketPC PDA converter now disconnected from ttyUSB1
ipaq 2-1:1.0: device disconnected

I find this is by sl-modem-daemon and I need to stop this to get it work!

TODO:
- How can i use other ppp port like ppp1 not ppp0 like what the modem and pocket pc use now.

2- Show "Resync" button: from multisync options > show "Resync" button than use it to do sync it work with me like that 3-change the option on Ximian Evolution 2 -optional- to use address contact task from Evolution.

[[UbuntuHelp:]]

@@ 第3行： / 第3行： @@
 == Windows Mobile ==
-Ubuntu does not work with Windows Mobile 5 currently, although support is being worked on for the next version of the MultiSync's SyncCE plugin. Until that support comes, there are two possible solutions:
+Users of Windows Mobile 5, Windows Mobile 2003 and PocketPC can sync email, contacts, calender appointments with Evolution.
-* Compiling the unfinished source code for the next version  of SyncCE yourself (this may help sync contacts, appointments, mail, etc)
-* Using a storage device that your computer cvan also read, such an an SD card (if your computer has a card reader) or Sandisk's SD+USB for file transfer.
-Users of Windows Mobile 2003 and PocketPC can sync email, contacts, calender appointments with Evolution by installing the '''multisync''' package. See InstallingSoftware.
+Ubuntu does not yet work with Windows Mobile 6 currently. Until that support comes, there are two possible solutions:
+* Using Windows Mobile 6's USB storage mode
+* Using a storage device that your computer can also read, such an an SD card (if your computer has a card reader) or Sandisk's SD+USB for file transfer.
-== O2 XDA Exec ==
+== Connecting to a Windows Mobile 5, 2003 or PocketPC Device ==
-I have successfully used my XDA Exec as a wireless modem with my Laptop. This is how I got it to work(roughly) :
+Plug in the device via the included USB cable.
-.Start the XDA in the wireless modem mode from Start-> Programs -> Wireless Modem
+* Install the '''synce-dccm''', '''synce-serial''' and '''librra0-tools''' packages. To sync with Evolution, you'll also need the '''multisync''', '''synce-multisync-plugin''', '''libmultisync-plugin-evolution''' and '''libmultisync-plugin-backup''' packages. See [[UbuntuHelp:InstallingSoftware|Installing Software]]. The packages installer will ask various questions about how to connect to your device:
+** Leave the serial interface as "/dev/ttyUSB0"
+** Leave the default local IP address "192.168.131.102"
+** Leave the default remote IP address "192.168.131.201"
+** Set the IP address of your DNS server to "192.168.0.1"
-.Now Connect the USB cable to the PC/laptop.
+* Make sure ports 5678, 5679 and 990 are not blocked by a firewall
+* Click '''Applications''' -> '''Accessories''' -> '''Terminal'''. In the Terminal window, run:
+<pre><nowiki>
+dccm
+sudo synce-serial-start
+</nowiki></pre>
+Depending on your device you may have to run the sudo synce-serial-start command within a few seconds of powering the Windows Mobile device on. The computer should now show: <code><nowiki> synce-serial-start is now waiting for your device to connect</nowiki></code>. The Windows Mobile Device should appear connected, in a similar way to when connected via ActiveSync on Windows.
-.Type "dmesg", my out put was something like this:
+== Synchronizing with Evolution ==
-[ 2460.552000] usb 2-2: new full speed USB device using uhci_hcd and address 2
+* Click '''Applications''' -> '''Accessories''' -> '''Multisync'''
-[ 2460.716000] usb 2-2: configuration #1 chosen from 1 choice
+** Click '''New'''
-[ 2472.468000] usb 2-2: USB disconnect, address 2
+**** First plugin: SynCE Plugin
-[ 2619.388000] usb 2-2: new full speed USB device using uhci_hcd and address 3
-[ 2619.552000] usb 2-2: configuration #1 chosen from 1 choice
-[ 2640.444000] usb 2-2: USB disconnect, address 3
-[ 2679.908000] usb 2-2: new full speed USB device using uhci_hcd and address 4
-[ 2680.084000] usb 2-2: configuration #1 chosen from 1 choice
-[ 2680.956000] usbcore: registered new interface driver usbserial
-[ 2680.960000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
-[ 2680.960000] usbcore: registered new interface driver usbserial_generic
-[ 2680.960000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
-[ 2680.992000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
-[ 2680.992000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
-. Now type "wvdialconf" to see if it detects it as a modem. In my case there segmentation fault but I ignored and carried on!
+**** Second plugin: Ximian Evolution 2
-. Edit the "/etc/wvdial.conf" file as follows:
+**** Display Name: <whatever you what to call it>
+**** Data types to synchronize: Calendar + Addressbook + Tasks
+* to disconnect the Windows Mobile device:
+**** Shutdown Multisync
+**** "killall -HUP dccm" to kill the serial connection.
+**** As a last resort, run "synce-serial-abort", if the above command doesn't work.
+== Troubleshooting ==
+* If you  forget to run "dccm" before synce-serial-start, power off the pocket pc  and run
+<pre><nowiki>
+sudo rmmod ipaq
+sudo rmmod ehci_hcd
+sudo rmmod uhci_hcd
+sudo rmmod usbserial
+</nowiki></pre>
+Note: these must be run in a certain order, try a different order if it doesn't work.
+* If syncronisation still doesn't work, close multisync and then run
+<pre><nowiki>
+synce-matchmaker create 1
+</nowiki></pre>
+If 1 doesn't work, try 2.
+== Wireless Modem ==
+I have successfully used my XDA Exec as a wireless modem with my Laptop. This is how I got it to work(roughly) :
+. Start the Windows Mobile device in the wireless modem mode from Start-> Programs -> Wireless Modem
+. Now connect the USB cable to the computer.
+. In a Terminal, run
+<pre><nowiki>
+wvdialconf
+</nowiki></pre> to see if it detects it as a modem. If this doesn't work, edit the "/etc/wvdial.conf" file as follows:
 [Dialer Defaults]
@@ 第54行： / 第99行： @@
 . Now type "wvdial" in the command prompt, it should now connect.
+== Compatibilty ==
+Devices that are known to work with this howto:
+* HP iPaq hx4150
+* HP iPaq rx3115
+* HP iPaq h2215/h2210
+* HP iPaq h1940
+* HP iPaq h1930
+* DELL Axim X3i & X30 & X50v
+* XDA IIs
+* i-mate JAM [windows ce 2003]
+* Acer n50 Premium
+* please add your devices to this list if it works for you
+== Troubleshooting  ==
+To check your Windows Mobile Device has been detected, click '''System''' -> '''Administration'' -> '''System Log''', then select '''messages'''.
+Alternatively, run <code><nowiki>dmesg</nowiki></code> in a terminal.
+The results should look like the following:
+<pre><nowiki>
+[4312964.212000] usb 5-3.4: new full speed USB device using ehci_hcd and address 3
+[4312966.410000] usbcore: registered new driver usbserial
+[4312966.416000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
+[4312966.419000] usbcore: registered new driver usbserial_generic
+[4312966.419000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
+[4312966.439000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA
+[4312966.439000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
+[4312966.443000] ipaq 5-3.4:1.0: PocketPC PDA converter detected
+[4312966.445000] usb 5-3.4: PocketPC PDA converter now attached to ttyUSB0
+[4312966.445000] usbcore: registered new driver ipaq
+</nowiki></pre>
+== Comment ==
+- STOP sl-modem-daemon :
+<pre><nowiki>
+PocketPC PDA ttyUSB1: PocketPC PDA converter now disconnected from ttyUSB1
+ipaq 2-1:1.0: device disconnected
+</nowiki></pre>
+I find this is by sl-modem-daemon and I need to stop this to get it work!
+*TODO:
+**How can i use other ppp port like ppp1 not ppp0 like what the modem and pocket pc use now.
+- Show "Resync" button:
+from multisync options > show "Resync" button
+than use it to do sync it work with me like that
+-change the option on Ximian Evolution 2 -optional-
+to use address contact task from Evolution.
 ----
 [[UbuntuHelp:[[category:CategoryPDA]]]]
+== See also ==
+* [http://multisync.sourceforge.net/ MultiSync]
+* [http://synce.sourceforge.net/synce/howto.php SynCE - Linux USB HOWTO]
 [[category:UbuntuHelp]]

个人工具

“UbuntuHelp:PortableDevices/WindowsMobile”的版本间的差异 - Ubuntu中文

搜索

导航

编辑

工具

“UbuntuHelp:PortableDevices/WindowsMobile”的版本间的差异

来自Ubuntu中文

2007年11月21日 (三) 18:18的版本

目录

Windows Mobile

Connecting to a Windows Mobile 5, 2003 or PocketPC Device

Synchronizing with Evolution

Troubleshooting

Wireless Modem

Compatibilty

Troubleshooting

Comment

See also

	隐私政策关于Ubuntu中文免责声明
	Mozilla Cavendish Theme based on Cavendish style by Gabriel Wicke modified by DaSch for the Web Community Wiki github Projectpage – Report Bug – Skin-Version: 2.3.4