个人工具
登录
查看“UbuntuHelp:OptionGTMaxHardy”的源代码 - Ubuntu中文
UbuntuHelp
讨论
查看源代码
历史
搜索
导航
首页
最近更改
随机页面
页面分类
帮助
编辑
编辑指南
沙盒
新闻动态
字词处理
工具
链入页面
相关更改
特殊页面
页面信息
查看“UbuntuHelp:OptionGTMaxHardy”的源代码
来自Ubuntu中文
←
UbuntuHelp:OptionGTMaxHardy
跳转至:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
{{From|https://help.ubuntu.com/community/OptionGTMaxHardy}} {{Languages|UbuntuHelp:OptionGTMaxHardy}} == Introduction == This page describes how to utilize your Option GT Max 3.6 express wireless card in Ubuntu Hardy 8.04. This guide may or may not work for variants of this card or for other Ubuntu versions (ie, original Option GT Max, USB versions, Gutsy, etc). The driver for this card (name: option) is provided by default with Hardy's kernel. == Prerequisites == To begin, there are two prerequisite packages that need installed: wvdial and gnome-ppp (kppp for Kubuntu). Packages can either be installed via the command line with apt-get or via Synaptic: <pre><nowiki> sudo apt-get install wvdial gnome-ppp </nowiki></pre> == Configuration == Once installed, wvdial needs to be configured. Open /etc/wvdial.conf with your favorite text editor and add the following (Note that the username, password, and isp init string settings need changed depending on your carrier. Settings below reflect AT&T/Cingular wireless): <pre><nowiki> [Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 115200 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 Init3 = AT+CFUN=1;+CGDCONT=1,"IP","isp.cingular" Area Code = Phone = *99# Username = ISP@CINGULARGPRS.COM Password = isp.cingular Ask Password = 0 Dial Command = ATD FlowControl=NOFLOW Stupid Mode = 1 Compuserve = 0 Force Address = Idle Seconds = 3000 DialMessage1 = DialMessage2 = ISDN = 0 Auto DNS = 1 </nowiki></pre> == Connecting == You may connect either with wvdial itself or with gnome-ppp/kppp. To connect with wvdial simply issue from a terminal: <pre><nowiki> wvdial </nowiki></pre> To connect with gnome-ppp/kppp, simply input the username, password and phone number, all of which are found in the wvdial configuration above. == Troubleshooting == If you have problems with your connection "hanging" (when downloading a file, for instance), try setting your modem's mode to 3g only or gprs only depending on your signal. This can be accomplished in Windows with Option Wireless's connection manager. Additionally, you can issue an AT command in Linux (with minicom, among others) to the card to change its mode. Both of these options are outside the scope of this article. If your card is not being recognized at all, ensure that the option driver is installed and loaded. To check if its installed, issue the command: <pre><nowiki> modinfo option </nowiki></pre> To see if its loaded: <pre><nowiki> lsmod | grep option </nowiki></pre> If its installed but not loaded, load it with: <pre><nowiki> sudo modprobe option </nowiki></pre> ---- [[category:CategoryWireless]] [[category:UbuntuHelp]]
该页面使用的模板:
模板:From
(
查看源代码
)
模板:Languages
(
查看源代码
)(受保护)
模板:Languages/Lang
(
查看源代码
)(受保护)
返回至
UbuntuHelp:OptionGTMaxHardy
。