个人工具

“UbuntuHelp:Installation/QuickNetboot”的版本间的差异

来自Ubuntu中文

跳转至： 导航, 搜索
小
小
 
（未显示同一用户的3个中间版本）
第2行： 第2行：
 
{{Languages|UbuntuHelp:Installation/QuickNetboot}}
 
{{Languages|UbuntuHelp:Installation/QuickNetboot}}
 
There is more than one way to install Ubuntu via netboot, search for ''netboot'' in the Ubuntu wiki.
 
There is more than one way to install Ubuntu via netboot, search for ''netboot'' in the Ubuntu wiki.
−
This guide aims to give simple, complete and verifiable instructions to get netboot working in a matter of minutes. They are for installing Ubuntu 7.10, but with minor modifications in step 2 they should work for other Ubuntu releases as well.   
+
This guide aims to give simple, complete and verifiable instructions to get netboot working in a matter of minutes. They are for installing Ubuntu 8.04, but with minor modifications in step 2 they should work for other Ubuntu releases as well.   
 
== Before you begin ==
 
== Before you begin ==
 
There should be no other DHCP servers running in the subnet. You ''might'' succeed with two servers as well (as I did), but be warned.
 
There should be no other DHCP servers running in the subnet. You ''might'' succeed with two servers as well (as I did), but be warned.
 +
You might want to check if TFTP service is already enabled on your server, e.g. via inetd (''/etc/inetd.conf''; use ''update-inetd --disable tftp'' to turn off the inetd service).
 
== DHCP/TFTP server installation ==
 
== DHCP/TFTP server installation ==
 
=== Prepare ===
 
=== Prepare ===
 +
0 become the root user
 +
<pre><nowiki>
 +
sudo -i
 +
</nowiki></pre>
 
<ol><li>install required software</li></ol>
 
<ol><li>install required software</li></ol>
  
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo apt-get install dnsmasq atftp atftpd
+
apt-get install dnsmasq atftp
 
</nowiki></pre>
 
</nowiki></pre>
 
1.#2 download and unpack the netboot tarball
 
1.#2 download and unpack the netboot tarball
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo mkdir /tftpboot
+
mkdir /tftpboot
 
cd /tftpboot
 
cd /tftpboot
−
sudo wget http://archive.ubuntu.com/ubuntu/dists/gutsy/main/installer-i386/current/images/netboot/netboot.tar.gz
+
wget http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/netboot.tar.gz
−
sudo tar zxf netboot.tar.gz
+
tar zxf netboot.tar.gz
−
sudo chown -R nobody: .
+
chown -R nobody: .
 
</nowiki></pre>
 
</nowiki></pre>
−
1.#3 tell ''dnsmasq'' to assign addresses starting from <BEGIN_IP_RANGE> until <END_IP_RANGE>, put the server's ip address in <SERVER_IP>, the default gateway must be put in <DEFAULT_GW>, and the dns server in <DNS_SERVER>. Append this to /etc/dnsmasq.conf with your favorite editor:
+
1.#3 tell ''dnsmasq'' to assign addresses starting from <BEGIN_IP_RANGE> until <END_IP_RANGE>, and to enable the TFTP service for BOOTP (PXE). The default gateway must be put in <DEFAULT_GW>, and the dns server in <DNS_SERVER> (both of these may be omitted if the host running ''dnsmasq'' is also the LAN's default gateway and DNS server). Append this to /etc/dnsmasq.conf with your favorite editor:
 
<pre><nowiki>
 
<pre><nowiki>
 
dhcp-range=<BEGIN_IP_RANGE>,<END_IP_RANGE>,12h
 
dhcp-range=<BEGIN_IP_RANGE>,<END_IP_RANGE>,12h
−
dhcp-boot=pxelinux.0,<SERVER_IP>
+
enable-tftp
 +
tftp-root=/tftpboot
 +
dhcp-boot=pxelinux.0
 
dhcp-option=3,<DEFAULT_GW>
 
dhcp-option=3,<DEFAULT_GW>
 
dhcp-option=6,<DNS_SERVER>
 
dhcp-option=6,<DNS_SERVER>
第30行： 第37行：
 
<pre><nowiki>
 
<pre><nowiki>
 
dhcp-range=192.168.0.20,192.168.0.30,12h
 
dhcp-range=192.168.0.20,192.168.0.30,12h
−
dhcp-boot=pxelinux.0,192.168.0.10
+
enable-tftp
 +
tftp-root=/tftpboot
 +
dhcp-boot=pxelinux.0
 
dhcp-option=3,192.168.0.1
 
dhcp-option=3,192.168.0.1
 
dhcp-option=6,192.168.0.1
 
dhcp-option=6,192.168.0.1
第36行： 第45行：
 
Then restart dnsmasq with the following command:
 
Then restart dnsmasq with the following command:
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo invoke-rc.d dnsmasq restart
+
invoke-rc.d dnsmasq restart
 
</nowiki></pre>
 
</nowiki></pre>
−
1.#4 tell ''atftpd'' to run as a server directly, not through ''inetd''
+
1.#4 check that your firewall is not blocking DHCP/TFTP traffic (UDP) or, alternatively, just turn off the firewall altogether
−
<pre><nowiki>
+
−
sudo sed -e '/USE_INETD=/s/true/false/' -i /etc/default/atftpd
+
−
 
+
−
sudo invoke-rc.d inetd stop
+
−
sudo invoke-rc.d xinetd stop
+
−
sudo invoke-rc.d atftpd restart
+
−
</nowiki></pre>
+
−
1.#5 check that your firewall is not blocking DHCP/TFTP traffic (UDP) or, alternatively, just turn off the firewall altogether
+
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo iptables -F
+
iptables -F
−
sudo iptables -X
+
iptables -X
−
sudo iptables -P INPUT ACCEPT
+
iptables -P INPUT ACCEPT
−
sudo iptables -P FORWARD ACCEPT
+
iptables -P FORWARD ACCEPT
−
sudo iptables -P OUTPUT ACCEPT
+
iptables -P OUTPUT ACCEPT
−
sudo iptables -t mangle -F 2>/dev/null
+
iptables -t mangle -F 2>/dev/null
−
sudo iptables -t mangle -X 2>/dev/null
+
iptables -t mangle -X 2>/dev/null
−
sudo iptables -t nat -F 2>/dev/null
+
iptables -t nat -F 2>/dev/null
−
sudo iptables -t nat -X 2>/dev/null
+
iptables -t nat -X 2>/dev/null
 
</nowiki></pre>
 
</nowiki></pre>
−
1.#6 everything is ready to run now. Time to verify if everything really works.
+
1.#5 everything is ready to run now. Time to verify if everything really works.
 
=== Verify ===
 
=== Verify ===
 
<ol><li>check ''iptables'', if you turned it off, there should be no rules and the policy should be ''ACCEPT''</li></ol>
 
<ol><li>check ''iptables'', if you turned it off, there should be no rules and the policy should be ''ACCEPT''</li></ol>
  
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo iptables -L
+
iptables -L
−
sudo iptables -t nat -L
+
iptables -t nat -L
−
sudo iptables -t mangle -L
+
iptables -t mangle -L
 
</nowiki></pre>  
 
</nowiki></pre>  
 
1.#2 check if ''dnsmasq'' is listening on the ''bootp'' port 67
 
1.#2 check if ''dnsmasq'' is listening on the ''bootp'' port 67
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo netstat -nulp | grep '67.*dnsmasq' # should display udp  0  0 0.0.0.0:67  0.0.0.0:*  <some num>/dnsmasq
+
netstat -nulp | grep '67.*dnsmasq' # should display udp  0  0 0.0.0.0:67  0.0.0.0:*  <some num>/dnsmasq
 
</nowiki></pre>
 
</nowiki></pre>
−
1.#3 check if ''atftpd'' is listening on the ''tftp'' port 69
+
1.#3 check if ''dnsmasq'' is listening on the ''tftp'' port 69
 
<pre><nowiki>
 
<pre><nowiki>
−
sudo netstat -nulp | grep atftpd # should display udp  0  0 0.0.0.0:69  0.0.0.0:*  <some num>/atftpd
+
netstat -nulp | grep '69.*dnsmasq' # should display udp  0  0 0.0.0.0:69  0.0.0.0:*  <some num>/dnsmasq
 
</nowiki></pre>
 
</nowiki></pre>
−
1.#4 test if you can get the PXE boot kernel via tftp, replace SERVER_IP with your own ip address.
+
1.#4 test if you can get the PXE boot kernel via tftp.
 
<pre><nowiki>
 
<pre><nowiki>
 
cd /tmp
 
cd /tmp
−
echo 'get pxelinux.0' | atftp SERVER_IP
+
echo 'get pxelinux.0' | atftp localhost
  
 
ls -l pxelinux.0 # should display a ~14kB file
 
ls -l pxelinux.0 # should display a ~14kB file

2010年5月19日 (三) 22:51的最新版本

Geographylogo.png 文章出处: 

https://help.ubuntu.com/community/Installation/QuickNetboot

Geographylogo.png 点击翻译: 

English

请不要直接编辑翻译本页，本页将定期与来源同步。

There is more than one way to install Ubuntu via netboot, search for netboot in the Ubuntu wiki. This guide aims to give simple, complete and verifiable instructions to get netboot working in a matter of minutes. They are for installing Ubuntu 8.04, but with minor modifications in step 2 they should work for other Ubuntu releases as well.

Before you begin

There should be no other DHCP servers running in the subnet. You might succeed with two servers as well (as I did), but be warned. You might want to check if TFTP service is already enabled on your server, e.g. via inetd (/etc/inetd.conf; use update-inetd --disable tftp to turn off the inetd service).

DHCP/TFTP server installation

Prepare

0 become the root user 

sudo -i
  1. install required software
apt-get install dnsmasq atftp

1.#2 download and unpack the netboot tarball 

mkdir /tftpboot
cd /tftpboot
wget http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/netboot.tar.gz
tar zxf netboot.tar.gz
chown -R nobody: .

1.#3 tell dnsmasq to assign addresses starting from <BEGIN_IP_RANGE> until <END_IP_RANGE>, and to enable the TFTP service for BOOTP (PXE). The default gateway must be put in <DEFAULT_GW>, and the dns server in <DNS_SERVER> (both of these may be omitted if the host running dnsmasq is also the LAN's default gateway and DNS server). Append this to /etc/dnsmasq.conf with your favorite editor: 

dhcp-range=<BEGIN_IP_RANGE>,<END_IP_RANGE>,12h
enable-tftp
tftp-root=/tftpboot
dhcp-boot=pxelinux.0
dhcp-option=3,<DEFAULT_GW>
dhcp-option=6,<DNS_SERVER>

An example append is shown here: 

dhcp-range=192.168.0.20,192.168.0.30,12h
enable-tftp
tftp-root=/tftpboot
dhcp-boot=pxelinux.0
dhcp-option=3,192.168.0.1
dhcp-option=6,192.168.0.1

Then restart dnsmasq with the following command: 

invoke-rc.d dnsmasq restart

1.#4 check that your firewall is not blocking DHCP/TFTP traffic (UDP) or, alternatively, just turn off the firewall altogether 

iptables -F
iptables -X
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
iptables -t mangle -F 2>/dev/null
iptables -t mangle -X 2>/dev/null
iptables -t nat -F 2>/dev/null
iptables -t nat -X 2>/dev/null

1.#5 everything is ready to run now. Time to verify if everything really works.

Verify

  1. check iptables, if you turned it off, there should be no rules and the policy should be ACCEPT
iptables -L
iptables -t nat -L
iptables -t mangle -L

1.#2 check if dnsmasq is listening on the bootp port 67 

netstat -nulp | grep '67.*dnsmasq' # should display udp  0  0 0.0.0.0:67  0.0.0.0:*  <some num>/dnsmasq

1.#3 check if dnsmasq is listening on the tftp port 69 

netstat -nulp | grep '69.*dnsmasq' # should display udp  0  0 0.0.0.0:69  0.0.0.0:*  <some num>/dnsmasq

1.#4 test if you can get the PXE boot kernel via tftp. 

cd /tmp
echo 'get pxelinux.0' | atftp localhost

ls -l pxelinux.0 # should display a ~14kB file

Boot the client

Enable PXE boot in BIOS or use Ethertool or whatever makes your client boot off the net. See e.g. http://syslinux.zytor.com/pxe.php .

Problems?

  1. check syslog (/var/log/syslog)
  2. use ethereal (wireshark) to inspect network traffic
取自“https://wiki.ubuntu.org.cn/index.php?title=UbuntuHelp:Installation/QuickNetboot&oldid=138962”