“UbuntuHelp:Installation/HardDriveAndPcmcia”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第21行: | 第21行: | ||
== Preparing the booting == | == Preparing the booting == | ||
* Mount the Edubuntu Cd to a dir you have access to or create a new directory (it depends on what permissions you have to work on the current system). | * Mount the Edubuntu Cd to a dir you have access to or create a new directory (it depends on what permissions you have to work on the current system). | ||
− | ** As for this HowTo I am using a previously installed Ubuntu on ''server'' mode, I created a <code><nowiki>/mnt/CdDrive</nowiki></code> directory, and then mounted <code><nowiki>/dev/hdc</nowiki></code> on it, which is the PCMCIA Cd drive. | + | ** As for this [[UbuntuHelp:HowTo|HowTo]] I am using a previously installed Ubuntu on ''server'' mode, I created a <code><nowiki>/mnt/CdDrive</nowiki></code> directory, and then mounted <code><nowiki>/dev/hdc</nowiki></code> on it, which is the PCMCIA Cd drive. |
<pre><nowiki> | <pre><nowiki> | ||
$ mkdir /mnt/CdDrive | $ mkdir /mnt/CdDrive |
2007年12月4日 (二) 10:41的版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
目录
Why this installation method?
Because I have a laptop/desktop with neither CD drive nor Floppy drive that can actually make the machine boot from. However, I do have a PCMCIA Cd drive.
If you don't have the PCMCIA Cd drive, I believe there's a way to install from a partition (usually /dev/the_partition
) you mount during installation procedure.
<!> If you have an URL we can use for that method, please provide it.
Hardware used for this
I successfully did it on:
- Fujitsu Lifebook B2175
- Celeron 500 MHz
- 256 MB of Ram
- 20 GB of HD
- PCMCIA CD drive
- Ubuntu previously installed on server mode via Edubuntu NetBoot
- Edubuntu CD (latest breezy .iso at the time I am writing this)
Software used
- Edubuntu or any GnuLinux distro should do fine.
- GRUB
-
vmlinuz
andinitrd.gz
files
Preparing the booting
- Mount the Edubuntu Cd to a dir you have access to or create a new directory (it depends on what permissions you have to work on the current system).
- As for this HowTo I am using a previously installed Ubuntu on server mode, I created a
/mnt/CdDrive
directory, and then mounted/dev/hdc
on it, which is the PCMCIA Cd drive.
- As for this HowTo I am using a previously installed Ubuntu on server mode, I created a
$ mkdir /mnt/CdDrive $ mount /dev/hdc /mnt/CdDrive
- Get the
vmlinuz
andinitrd.gz
files from the Edubuntu Cd.
Edit Grub file
Let's set menu.lst to read our vmlinuz
and initrd.gz
files.
/!\ Ooops! I apologize but I have lost the URL where I found the lines to set GRUB. If you know the lines, please do provide them.
PLACE THE LINES HERE
Reboot
Now, let's reboot and cross fingers :)