“UbuntuHelp:Installation/FromLinux”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第28行: | 第28行: | ||
The first line after the title tells grub which partition contains the installer. <code><nowiki>hd0</nowiki></code> stands for "first hard disk," and the 0 following it standards for first partition. You will need to change this if your installer partition is different from <code><nowiki>/dev/sda1</nowiki></code>. <code><nowiki>sdaN</nowiki></code> becomes <code><nowiki>(hd0, N-1)</nowiki></code>, <code><nowiki>sdbN</nowiki></code> becomes <code><nowiki>(hd1,N-1)</nowiki></code> and so on. As you can see, grub starts counting from 0, which can be confusing. | The first line after the title tells grub which partition contains the installer. <code><nowiki>hd0</nowiki></code> stands for "first hard disk," and the 0 following it standards for first partition. You will need to change this if your installer partition is different from <code><nowiki>/dev/sda1</nowiki></code>. <code><nowiki>sdaN</nowiki></code> becomes <code><nowiki>(hd0, N-1)</nowiki></code>, <code><nowiki>sdbN</nowiki></code> becomes <code><nowiki>(hd1,N-1)</nowiki></code> and so on. As you can see, grub starts counting from 0, which can be confusing. | ||
'''Step 4.''' Reboot, and choose "installer" from the grub boot menu, and continue as if you were installing from CD. | '''Step 4.''' Reboot, and choose "installer" from the grub boot menu, and continue as if you were installing from CD. | ||
+ | Note: if you unpacked the livecd on the same disk where you want to install Ubuntu, chances are you'll run into [https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/288675 LP#288675], and be unable to select a partition. The workaround by Nick Spencer ("sudo umount -l -r -f /dev/sda3 (where sda3 was the device mounted as cdrom)") is a rather terrible hack, but usable as a workaround. | ||
== Alternate CD == | == Alternate CD == | ||
As of December 29th 2007, the instructions above do not apply to the alternate CD provided for Ubuntu 7.10 (Gutsy Gibbon). Significant changes are required. Procedure 1 below has been used successfully with Gutsy (Ubuntu 7.10) and Procedure 2 with Hardy (Ubuntu 8.04). | As of December 29th 2007, the instructions above do not apply to the alternate CD provided for Ubuntu 7.10 (Gutsy Gibbon). Significant changes are required. Procedure 1 below has been used successfully with Gutsy (Ubuntu 7.10) and Procedure 2 with Hardy (Ubuntu 8.04). | ||
第36行: | 第37行: | ||
I used the following procedure for Gutsy. It can also be used for Hardy. | I used the following procedure for Gutsy. It can also be used for Hardy. | ||
'''Step 1.''' Use gparted to create a new primary partition and format it to <code><nowiki>ext3</nowiki></code>. You need slightly more than 700MB of free space on it. 750MB should be sufficient. Let's say the name of the partition is <code><nowiki>/dev/sda1</nowiki></code>. If your new ubuntu install is going to coexist with your old system, you might find it convenient to create space for your new system as well at this point using gparted. | '''Step 1.''' Use gparted to create a new primary partition and format it to <code><nowiki>ext3</nowiki></code>. You need slightly more than 700MB of free space on it. 750MB should be sufficient. Let's say the name of the partition is <code><nowiki>/dev/sda1</nowiki></code>. If your new ubuntu install is going to coexist with your old system, you might find it convenient to create space for your new system as well at this point using gparted. | ||
− | '''Step 2.''' Copy your alternate ISO to the root of the partition you created in step 1. You need to copy '''the ISO''' | + | '''Step 2.''' Copy your alternate ISO to the root of the partition you created in step 1. You need to copy '''the ISO itself''' rather than the contents of the ISO. |
'''Step 3.''' Grab the initrd.gz and vmlinuz files found in the following subdirectory of a Ubuntu mirror: | '''Step 3.''' Grab the initrd.gz and vmlinuz files found in the following subdirectory of a Ubuntu mirror: | ||
<pre><nowiki> | <pre><nowiki> | ||
第118行: | 第119行: | ||
<pre><nowiki>{ | <pre><nowiki>{ | ||
− | sudo mount --bind /dev | + | sudo mount --bind /dev /mnt/installer/dev |
sudo chroot /mnt/installer | sudo chroot /mnt/installer | ||
</nowiki></pre>} | </nowiki></pre>} | ||
第137行: | 第138行: | ||
<pre><nowiki>{ | <pre><nowiki>{ | ||
− | apt-get install ubuntu-desktop | + | apt-get install ubuntu-desktop ubuntu-standard |
</nowiki></pre>} | </nowiki></pre>} | ||
9. Reboot and keep those fingers crossed. | 9. Reboot and keep those fingers crossed. |
2009年5月12日 (二) 17:23的版本
![]() |
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
目录
Live CD
The Live CD is also known as the "Desktop Installer". It is the default Ubuntu installation CD. The ISO you downloaded has the name "desktop" in its name, these are the instructions to use. If your ISO has "alternate" in its name, you are using an alternate installation CD and should see the next section.
UNetbootin is a utility that can do much of the following automatically.
If you already have a working linux system, installing without external media is easy. You need to create a new partition, copy the CD contents over to it, boot from the new partition, and proceed as if you were installing from a CD. Note that you can't use what will be the root partition for the CD contents, as the installer is stubborn on formatting it (it will fail).
The benefits of installing without external media are that it can save you time if you are already familiar with the process, and you get a very usable system upon booting into the installer because it is running from a hard drive rather than a CD.
Step 1. Use gparted to create a new primary partition and format it to ext3
. You need slightly more than 700MB of free space on it. 750MB should be sufficient. Let's say the name of the partition is /dev/sda1
. If your new ubuntu install is going to coexist with your old system, you might find it convenient to create space for your new system as well at this point using gparted.
Step 2. Copy CD contents over to the new partition using the command
mkdir /tmp/install_cd sudo mount disk-image.iso -o loop /tmp/install_cd sudo mkdir /mnt/installer sudo mount /dev/sda1 /mnt/installer sudo cp -r /tmp/install_cd/* /mnt/installer sudo cp -r /tmp/install_cd/.disk /mnt/installer sudo umount /tmp/install_cd
Replace the name of the iso to whatever you downloaded and /dev/sda1
with whatever your new partition is.
Step 3. Edit your grub configuration file (typically /etc/grub.conf
or /boot/grub/menu.lst
) to boot from the new partition by adding the lines
title installer root (hd0,0) kernel /casper/vmlinuz boot=casper root=/dev/ram ramdisk_size=1048576 rw initrd /casper/initrd.gz
The first line after the title tells grub which partition contains the installer. hd0
stands for "first hard disk," and the 0 following it standards for first partition. You will need to change this if your installer partition is different from /dev/sda1
. sdaN
becomes (hd0, N-1)
, sdbN
becomes (hd1,N-1)
and so on. As you can see, grub starts counting from 0, which can be confusing.
Step 4. Reboot, and choose "installer" from the grub boot menu, and continue as if you were installing from CD.
Note: if you unpacked the livecd on the same disk where you want to install Ubuntu, chances are you'll run into LP#288675, and be unable to select a partition. The workaround by Nick Spencer ("sudo umount -l -r -f /dev/sda3 (where sda3 was the device mounted as cdrom)") is a rather terrible hack, but usable as a workaround.
Alternate CD
As of December 29th 2007, the instructions above do not apply to the alternate CD provided for Ubuntu 7.10 (Gutsy Gibbon). Significant changes are required. Procedure 1 below has been used successfully with Gutsy (Ubuntu 7.10) and Procedure 2 with Hardy (Ubuntu 8.04).
Before going any further please note that the alternate CD contains documentation which can help with fixing problems or adapting solutions to your own situation. The documentation is located in doc/install/manual/
on the alternate CD. Please refer to that documentation as needed.
Note that Procedure 2 is potentially less disruptive because it does not call for a new partition.
For a simpler installation method which generally does not require repartitioning, and downloads the packages at install time rather than requiring an ISO, see Installation/NetbootInstallFromInternet.
Procedure 1
I used the following procedure for Gutsy. It can also be used for Hardy.
Step 1. Use gparted to create a new primary partition and format it to ext3
. You need slightly more than 700MB of free space on it. 750MB should be sufficient. Let's say the name of the partition is /dev/sda1
. If your new ubuntu install is going to coexist with your old system, you might find it convenient to create space for your new system as well at this point using gparted.
Step 2. Copy your alternate ISO to the root of the partition you created in step 1. You need to copy the ISO itself rather than the contents of the ISO.
Step 3. Grab the initrd.gz and vmlinuz files found in the following subdirectory of a Ubuntu mirror:
dists/gutsy/main/installer-i386/current/images/hd-media/
For example in the UK the files may be found at
http://gb.archive.ubuntu.com/ubuntu/dists/gutsy/main/installer-i386/current/images/hd-media/
Put these files in your newly created partition. They can be in the root of the partition or in a subdirectory.
Step 4. Edit your grub configuration file (typically /etc/grub.conf
or /boot/grub/menu.lst
) to boot from the new partition by adding the lines:
title installer root (hd0,0) kernel /install/vmlinuz root=/dev/ram ramdisk_size=1048576 rw initrd /install/initrd.gz
<<Anchor(altproc1step4)>>If you use LILO, see the official documentation on the alternate CD for how to configure LILO. Or you can adapt the lines above for LILO if you know Grub and LILO well.
The first line after the title tells grub which partition contains the installer. hd0
stands for "first hard disk," and the 0 following it standards for first partition. You will need to change this if your installer partition is different from /dev/sda1
. sdaN
becomes (hd0, N-1)
, sdbN
becomes (hd1,N-1)
and so on. As you can see, grub starts counting from 0, which can be confusing. The paths for the kernel and the initrd were set to start with /install/
in my setup but you could put those files in the root of the install partition and have them be /vmlinuz
and /initrd.gz
if you so wish.
As specified in the above, the installer will run without a preseed file. The preseed tells the installer what kind of system you are trying to install and it automatically selects some options for you during installation. For instance, using the ubuntu.seed
file tells the installer that you want to install a full "desktop" system, with Gnome and everything. If you do not select a preseed file, it is unclear what the installer thinks. In my (LouisDominiqueDubeau) experience, it installs some sort of cli or server form of Ubuntu. This is not disastrous but it may not be what you want. In Hardy in particular, running the installer without a seed results in LILO installed as the boot loader rather than Grub. Ugly... So it is better to select a seed. Adding the parameter file=/cdrom/preseed/ubuntu.seed
to the kernel
line above should take care of the problem. If installing Kubuntu, select kubuntu.seed
instead. Adapt to other situations as needed.
Step 5. Reboot, and choose "installer" from the grub boot menu, and continue as normal.
Procedure 2
In this procedure you do not create a new partition to hold the installer. This procedure was used for Hardy. It may be adaptable for Gutsy. Step 1. Copy your alternate ISO to the root of any partition that the installer can mount. You need to copy the ISO itself rather than the contents of the ISO. The important part here is that you must find a partition that the installer can mount, as it will search during the install procedure. If you use the traditional partitioning system used by DOS since ages immemorial, then any filesystem supported by Ubuntu should work. In particular ext2/ext3/ntfs/fat/vfat should all work. If you use LVM, things are trickier. As of April 26th 2008, the installer is unable to find an ISO stored on a partition managed in LVM. The installer can install Ubuntu in an LVM partition but in the stage at which it looks for the ISO it has not yet loaded the LVM modules so it cannot find the ISO if it is on an LVM partition. An enterprising person should be able to work around that problem but by default the installer won't find the ISO if it is on an LVM partition. If you have Windows installed, then the Windows partition, which normally is not managed by LVM (because I don't think Windows supports LVM), can hold the ISO. Step 2. Grab the initrd.gz and vmlinuz files found in the following subdirectory of a Ubuntu mirror:
dists/hardy/main/installer-i386/current/images/hd-media/
For example in the UK the files may be found at
http://gb.archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/hd-media/
You will want to put these files in your normal /boot/
directory. It may be a good idea to create a subdirectory like newinstall
, hardy-install
, or something similar.
Step 3. Read the information at [[UbuntuHelp:[altproc1step4|step 4 of procedure 1]]] above and then come back here: the information there will tell you what hd0,0 means and will inform you about seeds, etc. Edit your grub configuration file (typically /etc/grub.conf
or /boot/grub/menu.lst
) to boot from the new partition by adding the lines:
title installer root (hd0,0) kernel /boot/newinstall/vmlinuz initrd /boot/newinstall/initrd.gz
If you want a preseed file, change the kernel line to:
kernel (hd0,0)/newinstall/vmlinuz file=/cdrom/preseed/ubuntu.seed
Note that some users report working installs with grub without seeds and/or seeds not working with this method. Adapt as needed to your situation. Step 4. Reboot, and choose "installer" from the grub boot menu, and continue the installation as normal.
Alternate CD Alternate Method
I have a machine without a CD-ROM drive but with a network connection, and I struggled with these instructions for many days. Finally, I stumbled upon some straightforward solutions which appear to work for me. 1. Obtain Alternate CD. (This method may work for other CDs, I have not tried) 2. Mount at a temporary location, as described previously. 3. Copy vmlinuz and initrd.gz from mounted installation media to normal location on current linux root (the one to be replaced) 4. Unmount CDROM image. 5. Copy image as is to selected partition (i.e. cat "image" > /dev/hdXX 6. Configure grub or LILO as above 7. Reboot. 8. When choosing CDROM drive, choose manually, do not install a driver, for the device enter the partition to which you copied the image. 9. Continue installation as normal.
So far so good! I'll let you know if it breaks later :P
Without CD
You can install Ubuntu directly from Ubuntu using debootstrap. Debootstrap installs some essential packages in a directory for use with chroot. Note that the essential packages does not in itself make the system bootable. It just installs what you need to chroot to that directory and use apt-get to install other packages witch makes ubuntu usable. First check that you have debootstrap installed:
{ sudo apt-get install debootstrap}
1. Partition your filesystem (as explaned above) 2. Mount that new partition
{ sudo mkdir /mnt/installer sudo mount /dev/sda1 /mnt/installer}
3. Create the new install
{ sudo debootstrap hardy /mnt/installer}
4. Copy files to the new install
{ sudo cp /etc/resolv.conf /mnt/installer/etc/resolv.conf sudo cp /etc/apt/sources.list /mnt/installer/chroot/etc/apt/ # If you want to keep your repositories}
5. Chroot to your new install
{ sudo mount --bind /dev /mnt/installer/dev sudo chroot /mnt/installer}
6. Upgrade the new install
{ apt-get update apt-get upgrade}
7. Install Grub and Linux
{ apt-get install grub linux-image grub-install /dev/sda}
It is now safe to reboot 8. Install ubuntu-desktop
{ apt-get install ubuntu-desktop ubuntu-standard}
9. Reboot and keep those fingers crossed.