“UbuntuHelp:DialupModemHowto/Intel536EP”的版本间的差异

2007年11月30日 (五) 16:44的版本

文章出处:

https://help.ubuntu.com/community/DialupModemHowto/Intel536EP

点击翻译:

English  • 中文

请不要直接编辑翻译本页，本页将定期与来源同步。

Modems supported by the Intel536EP driver

This page describes how to install the driver for the Intel 536EP internal modem on Ubuntu for i386 systems. Some of these are sold as Cnet modems and have Ambient chips on board. The process below is quick easy and works quite well. You can tell if you have this type of modem by running this command in a Linux shell/terminal:

lspci | grep 536EP

If you receive no output from that command, then you do not have an Intel 536ep modem. If you do have the modem, you should have received output similar to this:

01:0b.0 Communication controller: Intel Corporation 536EP Data Fax Modem

Update: Prepackaged driver download http://ubuntuforums.org/showthread.php?t=471503 As of this writing, compilation and usage has been tested on 5.10, 6.06, 6.10 and 7.04; only compilation has been tested on 5.04 and nothing at all tested on 4.10. If anyone else succeeds (or fails), please update this page. The procedure is fairly similar for Ubuntu releases 4.10, 5.04 and 5.10. There is a minor complication on 5.10, discussed below.

Install required Ubuntu packages

Ubuntu 5.04 (Hoary Hedgehog) Make sure you have followed the section entitled If compiling from source in here. Ubuntu 5.10 (Breezy Badger) Make sure you have followed the sections entitled If compiling from source and Installing GCC 3.4 in here. Ubuntu 6.06 (Dapper Drake) It's not clear if you need GCC 3.4; it will probably work with the 'normal' gcc you get when following the Compiling the driver section below. Ubuntu 6.10 (Edgy Eft) and 7.04 (Feisty Fawn) No extra packages are required.

Get the driver itself

Download the drivers for the modem. For Ubuntu 5.04, 5.10 and 6.06, use this link: http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?agr=Y&ProductID=977&DwnldID=9266&strOSs=39&OSFullName=Linux*&lang=eng For 6.10, use this instead: http://linmodems.technion.ac.il/packages/Intel/Philippe.Vouters/intel-536EP-2.56.76.0_21_09_2006.tgz For 7.04, try this: http://linmodems.technion.ac.il/packages/intel/Philippe.Vouters/intel-536EP-2.56.76.0_23_02_2007.tgz or this: http://www.mrgtech.ca/intel_536ep_feisty.tar.gz Make sure you know where you've saved this file, which is named `Intel-536EP-4.71.tgz` or `intel-536EP-2.56.76.0_21_09_2006.tgz` or `intel-536EP-2.56.76.0_23_02_2007.tgz`; for the purposes of this document it will be assumed that it is in your home directory (which is /home/<username>, where <username> is your username).

Compiling the driver

First we need to uncompress the downloaded file. Start a terminal window and run the following command:

tar xzf Intel-536EP-4.71.tgz

or (for 6.10)

tar xzf intel-536EP-2.56.76.0_21_09_2006.tgz

or

tar xzf <filename>

where <filename> is the name of the downloaded file. This assumes you saved the file downloaded from Intel in your home directory; otherwise, type `cd <directory-where-the-file-is>` before typing the `tar` command above. This will create a directory `Intel-536` with the source contained in it. Change to this directory by typing

cd Intel-536

or (for 6.10 and 7.04)

cd intel-536EP-2.56.76.0

Still in the terminal window, type the following:

make clean

This should produce output looking like this:

Try `uname --help' for more information.
cd coredrv; make clean
make[1]: Entering directory `/home/rory/Intel-536/coredrv'
rm -f *.ko *.o *~ core
make[1]: Leaving directory `/home/rory/Intel-536/coredrv'
rm -f *.o *.ko

Now type

make 536

This will result in many lines of output being printed to the terminal window; you can ignore most of them. The final lines should look like this:

CC      /home/rory/Intel-536/coredrv/Intel536.mod.o
LD [M]  /home/rory/Intel-536/coredrv/Intel536.ko
make[2]: Leaving directory `/usr/src/linux-headers-2.6.12-9-386'
make[1]: Leaving directory `/home/rory/Intel-536/coredrv'

There should be an `Intel536.ko` file in the directory now; test this by typing `ls -l Intel536.ko`; the output should look like

-rw-r--r--  1 rory rory 1070520 2005-10-16 21:02 Intel536.ko

The file size should be similar, though probably not identical.

Installing the driver

There are two steps to installing the driver. The first is to copy the Intel536.ko file created above to an appropriate directory, and the second is to cause the driver to be loaded at boot time. Installing the Intel536.ko file Copy the file to the modules directory by this command:

sudo cp Intel536.ko /lib/modules/$(uname -r)/kernel/drivers/char

You may be prompted for a password; if so, enter your user password. Make your system aware of this module with `depmod`:

sudo depmod -a

Finally, load the driver with the `modprobe` command:

sudo modprobe Intel536

This command should not print a response; if it prints something like this:

FATAL: Module Intel536 not found.

you have made an error; most likely you have copied the file to the wrong place. If you see a different error message, there may be an error in the module, or your modem, or you may not have a Intel 536-based modem. Loading the driver at boot time To load the module at boot time, we need to add a line "Intel536" to the file /etc/modules. First make a backup of the file:

sudo cp /etc/modules /etc/modules.backup

Now run this to add the required line:

sudo sh -c "echo Intel536 >> /etc/modules"

Setting up the modem

The name of your modem device is `/dev/536ep0`. Kubuntu Users: To use KPPP you will need to create a symlink to /dev/536ep0 from /dev/modem. Udev rewrites everything in /dev on each reboot, thus erasing this symlink. So you have to create a rule for udev to recreate the symlink. You can add the needed rule by running this command:

sudo echo -e '# Intelmodem536ep\nKERNEL=="536ep0", SYMLINK=="modem"' >> /etc/udev/rules.d/10-local.rules
sudo ln -s /dev/536ep0 /dev/modem

After completing all of the above steps, you may need to reboot before you can access your modem.

Connecting

Dialing programs that will NOT work with this modem:

• The Gnome Network program
• KPPP
• pppconfig

Dialing programs that WILL work with this modem: (because they allow 'stupid mode')

• wvdial
• gnome-ppp

Currently, the graphical program gnome-ppp is not included in the standard installation, but once you are connected with wvdial, you can easily install it with the UbuntuHelp:Synaptic Package Manager. To setup wvdial, first make a backup of the current configuration file:

sudo mv /etc/wvdial.conf /etc/wvdial.conf.bak
sudo touch /etc/wvdial.conf

Next open the file /etc/wvdial.conf as root with an editor. (You can use the command sudo gedit /etc/wvdial.conf ) Copy the text below into that file. Modify the text so that your Dialup Phone#, Username, and Password are correct for your service. When finished, save and exit the file.

[Dialer Defaults]
Modem = /dev/536ep0
Baud = 115200
Init = ATZ
New PPPD = yes
Stupid Mode = 1
Auto Reconnect = off
#Carrier Check = no
Dial Attempts = 1
# MODIFY THE FOLLOWING 3 SECTIONS FOR YOUR CONNECTION
Phone = 1234567
Username = ExampleName
Password = ExamplePassword

You should be able to start your connection by typing into a shell/terminal:

wvdial

Go back to the main wiki