“UbuntuHelp:DialupModemHowto/Conexant”的版本间的差异

2008年10月19日 (日) 14:48的版本

文章出处:

https://help.ubuntu.com/community/DialupModemHowto/Conexant

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

Modems supported by the Conexant drivers

Note: Conexant does not provide drivers for Linux, but commercial Linux drivers are available from Linuxant, a seperate company. Licenses cost 19.99 US dollars. That comes with at least one year support and kernel-version upgrades, after which you need to purchase it again if you are running a different kernel which needs a newer version of the driver (although if you have the kernel headers installed it may be able to rebuild itself for your kernel, depending on what changes have been made in the driver - just try installing the deb and see). Without the license, the drivers are limited to a maximum speed of 14.4Kbps. However, some Conexant modems can be run with the sl-modem-drivers (smart link) or an open source driver. Note that in general, you can buy a Lucent or Intel (smartlink, or other brand with intel chipset) modem for less than 19.99 US.

Conexant drivers provided by Dell

Dell provides drivers for the Conexant modems of their Linux-based laptops which should work with all Conexant HSF modems. These drivers can be downloaded from the following addresses: For Ubuntu 8.04 (Hardy Heron): [[1]]. For Ubuntu 7.10 (Gusty Gibbon): [[2]]. Download the .deb file their, double click it and it will be installed automatically. Note: Ubuntu 7.04 (Feisty) users can use this link to install their Conexant HSF driver.

Open Source

Rafael Espíndola has ported the latest open source Conexant driver to 2.6.x kernels. AlexandreOttoStrube packaged it for Ubuntu Breezy using kernel 2.6.12-8. The source code and the binary package for Breezy can be found at [[3]]. An FTP mirror is at [[4]] courtesy AndyRabagliati. For Ubuntu 6.06 Dapper, [[https://help.ubuntu.com/community/DialupModemHowto/Conexant?action=AttachFile&do=get&target=modem-hsfpci.tar.bz2%5D%5D is a script to extend this driver to other supported hsf modems and other kernels. Just unpack it and read the HOWTO.

Quick Steps for setup of Linuxant/Conexant HSF driver

Assuming you know everything there is to know about your setup, all you need to do is: Get the ZIPped Debian hsfmodem package from Linuxant from another connected machine (find the Ubuntu 5.10 package). Remember to extract the Debian package to your Desktop (easier to locate). You will use the terminal application to run the commands listed below. The terminal application looks in specific directories for ".deb" packages. If you download binary file then goto Step 3. Step 1 If you are using Ubuntu 5.10 (Breezy Badger), make sure you have followed the section of this document entitled Installing GCC 3.4. Step 2 Then install hsfmodem:

unzip hsfmodem_*.deb.zip          #extract file
sudo dpkg -i hsfmodem_*.deb       #install .deb package

Step 3 And finalize the modem driver installation:

sudo hsfconfig

sudo hsfconfig will prompt you about your location, your email address and license credentials, assuming you've purchased one; if not, then go by the FREE license key which will grant you up to 14.4 kbps connectivity only :( Go|back to the main wiki