个人工具
登录
查看“UbuntuHelp:BootOptions/zh”的源代码 - Ubuntu中文
UbuntuHelp
讨论
查看源代码
历史
搜索
导航
首页
最近更改
随机页面
页面分类
帮助
编辑
编辑指南
沙盒
新闻动态
字词处理
工具
链入页面
相关更改
特殊页面
页面信息
查看“UbuntuHelp:BootOptions/zh”的源代码
来自Ubuntu中文
←
UbuntuHelp:BootOptions/zh
跳转至:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
{{From|https://help.ubuntu.com/community/BootOptions}} {{Languages|UbuntuHelp:BootOptions}} === 启动选项 === ==== 什么时候使用,如何使用 ==== 主要在两种情况下,你会用得着启动参数。一、当你安装 Ubuntu 时机器死掉了;二、安装完後系统启动不了,或者需要调整。 ==== 安装过程中调整启动选项 ==== 当你的安装程序加载完,或者从 LiveCD 启动时,你会看到如下画面:<br> http://i18.tinypic.com/6tzzndc.jpg <br> 按下 '''F6''' 键。然後画面如下所示:<br> http://i16.tinypic.com/7wonyxj.jpg <br> 你只要在它的後面添加一些参数即可。也就是说你可以通过添加参数来调整 Ubuntu 的启动方式。下面是一个添加参数的例子:<br> http://i17.tinypic.com/8bz22ir.jpg ==== 对已安装的系统进行调整 ==== 本段说明如何对 [[GRUB入门教程|GRUB]] 的启动菜单进行临时(非永久性的)调整。这里假设你已经安装了 GRUB,它是 Ubuntu 缺省的引导装载程序(本文不考虑其他类似程序,比如 LILO)。机器启动後你会看到一个 GRUB 消息。按下 '''ESC''' 键,你会进入一个文本菜单。通过键盘上的上下方向键选择要启动的项之後,按下‘e’键,进入编辑界面。其中第一行为“root”,你需要按下下方向键移至“kernel”行,再按一下‘e’键,进入该行的编辑界面。将光标移至行尾(Ctrl-E),将下面介绍的参数加进去。完成之後按下回车键,然後按下‘b’键启动。这样你的机器就应该能正常启动了。 === 启动命令行的参数 === 下面列出的选项并不完整,不过这些选项都是常用的。当屏幕上出现“boot:”的时候,你可以使用这些选项。选项的前面要有一个内核名称。如: 要给 <br> “boot: /boot/vmlinuz-2.6.15-26-k7 root=/dev/hda1 ro quiet splash”添加一个 vga=771 的选项,即为 <br> “boot: /boot/vmlinuz-2.6.15-26-k7 root=/dev/hda1 ro quiet splash vga=771” 这些选项可以连着一起用,比如: <br> “/boot/vmlinuz-2.6.15-26-k7 root=/dev/hda1 ro quiet splash noapic nolapic” ==== 内核参数 ==== 这些选项为内核所用,可在任何时候适用于任何机器。 ===== 参数: vga=xxx ===== 说明: 将你的[http://en.wikipedia.org/wiki/Linux_framebuffer 帧缓冲]显示率设置为 VESA 的 xxx 模式。[http://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Linux_video_mode_numbers 这里]列出了所有可能的值。 ===== 参数: acpi=off 或 noacpi ===== 说明: 该选项禁掉了整个 ACPI 系统。比如当你的机器不支持 ACPI 或者你觉得使用 ACPI 会有问题(如随机重启或系统锁死)时,这个选项会很有用。 ===== 参数: acpi=force ===== 说明: Activates the ACPI system even if your computer BIOS date is older than 2000. This parameter overwrites acpi=off and can also be used with current hardware if the ACPI support is not activated despite apm=off. ===== 参数: pci=noacpi 或 acpi=noirq ===== 说明: These parameters disable the PCI IRQ routing ===== 参数: pci=acpi ===== 说明: This parameter activates the PCI IRQ routing ===== 参数: acpi_irq_balance ===== 说明: ACPI is allowed to use PIC interrupts to minimize the common use of IRQs. ===== 参数: acpi_irq_nobalance ===== 说明: ACPI is not allowed to use PIC interrupts. ===== 参数: acpi=oldboot ===== 说明: Deactivates the ACPI system almost completely; only the components required for the boot process will be used. ===== 参数: acpi=ht ===== 说明: Deactivates the ACPI system almost completely; only the components required for hyper threading will be used. ===== 参数: noapic ===== 说明: Disable the "Advanced Programmable Interrupt Controller (APIC)". ===== 参数: nolapic ===== 说明: Disable the "local APIC". ===== 参数: apm=off OR noapm ===== 说明: Disable the Advanced Power Management. ===== 参数: irqpoll ===== 说明: Changes the way the kernel handles interrupt calls (set it to [http://en.wikipedia.org/wiki/Asynchronous_I/O polling]). Can be useful in case of hardware interrupt issues. ==== 安装程序选项 (user-land) ==== These options are usually used when installing a system, and are picked up by the installer program or start-up scripts, and not by the kernel. ===== 参数: debian-installer/framebuffer=false ===== 说明: Disable framebuffer. ===== 参数: hw-detect/start_pcmcia=false ===== 说明: Don't start PCMCIA. Personal Computer Memory Card International Association, one of the stranger names for a piece of hardware. :-) Your hardware is an association. ===== 参数: netcfg/disable_dhcp=true ===== 说明: Force static network config. ===== 参数: bootkbd=uk ===== 说明: 设置键盘布局。该参数的值是一个由两个字母组成的 ISO 国家代码。该选项可以帮助你设置正确的键盘布局。(本列表远未完工,请大家帮忙,自由添加缺少的选项) === 永久变更<br> === 一旦你需要用某个参数来启动你已经装好的系统,你就必须得编辑 /boot/grub/menu.lst 这个文件,使这个参数保持下来。要想这么做,请执行下面的命令: <pre>sudo nano /boot/grub/menu.lst </pre> 找到以 "# kopt=" 开头的行,添加上你的启动选项,然后执行: <pre>sudo update-grub </pre> to have the menu entries updated. NB! If you instead edit the menu entries directly, your changes will magically disappear the next time <code><nowiki>update-grub</nowiki></code> is run, for instance when system packages are updated. [[Category:UbuntuHelp]]
该页面使用的模板:
模板:From
(
查看源代码
)
模板:Languages
(
查看源代码
)(受保护)
模板:Languages/Lang
(
查看源代码
)(受保护)
返回至
UbuntuHelp:BootOptions/zh
。