UbuntuHelp:BluetoothMouse

文章出处:

https://help.ubuntu.com/community/BluetoothMouse

点击翻译:

English  • 中文

请不要直接编辑翻译本页，本页将定期与来源同步。

Bluetooth Mouse

Many people have reported problems with connecting a Bluetooth mouse and making it stay connected. There is an easy solution to this problem. You only have to do this once, and the mouse will connect automatically when you turn it on, or it resumes from power savings.

Preparation

6.10 and Newer

• Edit the file /etc/default/bluetooth: `sudo sensible-editor /etc/default/bluetooth`
• Set the variable `HIDD_ENABLED=1`.
• Restart the bluetooth service with the command: `sudo /etc/init.d/bluetooth restart`

Ubuntu Versions Older than 6.10

• `sudo apt-get install bluez-utils`
• Edit the file /etc/default/bluez-utils: `sudo sensible-editor /etc/default/bluez-utils`
• Set the variable `HIDD_ENABLED=1`.
• Restart the bluetooth service with the command: `sudo /etc/init.d/bluez-utils restart`

Connect the Mouse

Now let's connect the mouse:

sudo hidd --search

Retry this command until the mouse connects. You may have to turn it off and on or press the reset/connect button a couple of times.

Alternately, you can find the Bluetooth address of your mouse via:

• a label on the bottom of the mouse
• running `hcitool scan`

Once the address is known, type:

sudo hidd --connect deviceaddr

Where deviceaddr is the address of your mouse, for example 00:01:02:03:04:05

Now the mouse should reconnect once you turn it on, even if you reboot. Some people experience that using the hcitools for anything might create some fuzz with the hidd tool.

Approach is tested using:

*ubuntu Release	Kernel	bluez-utils
Ubuntu 7.10 gutsy	2.6.22-14-386	3.19-0ubuntu3
Kubuntu 7.04 feisty	2.6.20-15-generic	3.9-0ubuntu4
Ubuntu 6.10 edgy
Kubuntu 6.06 dapper	2.6.15-26-386	2.24

---