个人工具

“OpenVZ”的版本间的差异

来自Ubuntu中文

跳转至: 导航, 搜索
安装tf支持
安装tf支持
 
第421行: 第421行:
 
  ln -s /usr/local/bin/pip3 /usr/bin/pip3
 
  ln -s /usr/local/bin/pip3 /usr/bin/pip3
 
  pip3 install -i https://mirrors.aliyun.com/pypi/simple gunicorn flask image
 
  pip3 install -i https://mirrors.aliyun.com/pypi/simple gunicorn flask image
  pip3 install -i https://mirrors.aliyun.com/pypi/simple numpy tensorflow
+
  pip3 install -i https://mirrors.aliyun.com/pypi/simple numpy tensorflow==1.15
  
 
== 常用维护命令 ==
 
== 常用维护命令 ==

2019年11月26日 (二) 16:51的最新版本

OpevnVZ 一些自用初始化脚本

服务端

准备

系统 centos 6.7

安装 dnsmasq

yum install dnsmasq
sed -i "[email protected]#resolv-file.*[email protected]resolv-file=/etc/resolv.masqdns"
cp /etc/resolv.conf /etc/resolv.masqdns
echo "nameserver 127.0.0.1" > /etc/resolv.conf
chkconfig dnsmasq on
service dnsmasq start

安装 openvz

wget -P /etc/yum.repos.d/ http://ftp.openvz.org/openvz.repo
rpm --import http://ftp.openvz.org/RPM-GPG-Key-OpenVZ
yum install vzkernel
cat << "EOF" >> /etc/sysctl.conf
# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled
net.ipv4.ip_forward = 1
net.ipv6.conf.default.forwarding = 1
net.ipv6.conf.all.forwarding = 1
net.ipv4.conf.default.proxy_arp = 0

# Enables source route verification
net.ipv4.conf.all.rp_filter = 1

# Enables the magic-sysrq key
kernel.sysrq = 1

# We do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
EOF

sysctl -p
echo "SELINUX=disabled" > /etc/sysconfig/selinux
yum install vzctl vzquota ploop
reboot

安装 OpenVZ Web Panel

yum install rubygems ruby-devel
gem sources -a http://rubygems.org
gem update --system
gem update --system 1.8.25
gem install sqlite3-ruby
wget -O - https://raw.githubusercontent.com/sibprogrammer/owp/master/installer/ai.sh | \
bash -s DOWNLOAD_URL=http://owp.softunity.com.ru/download/ovz-web-panel-latest.tgz
chkconfig owp on

面板默认登陆用户名密码:admin/admin

注意,安装完毕OpenVZ的内核后,需要重启服务器再安装面板,面板需要将ruby的版本控制在1.8.25。

删除面板的代码:

wget -O - https://raw.githubusercontent.com/sibprogrammer/owp/master/installer/ai.sh | sh -s UNINSTALL=1

配置防火墙

iptables -A INPUT -p tcp -m tcp --dport 3000 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
iptables -t nat -A POSTROUTING -o em1 -j MASQUERADE
# 不能按下面的设置地址伪装,会造成不同服务器的 192.168.2.0/24 网段之间的访问也地址伪装,这样是不对的
#iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -j MASQUERADE
#iptables -A FORWARD -s 192.168.2.0/24 -j ACCEPT
#iptables -A FORWARD -d 192.168.2.0/24 -j ACCEPT
service iptables save
service iptables restart

vz 配置

vim /etc/sysconfig/vz
mkdir /home/vz
cp -ra /vz/* /home/vz
mv /vz /vz_bak
ln -s /home/vz /

客户机

基本环境配置

sed -i "s/archive.ubuntu.com/mirrors.163.com/" /etc/apt/sources.list
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 40976EAF437D05B5
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 3B4FE6ACC0B21F32
apt-get update
apt-get -y dist-upgrade
locale-gen --lang zh_CN.UTF-8
dpkg-reconfigure locales
update-locale LANG=zh_CN.UTF-8
rm /etc/localtime
ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo "Asia/Shanghai" >/etc/timezone
apt-get install sudo screen
adduser ubuntu
adduser ubuntu sudo

安装java

apt-get install openjdk-7-jdk
apt-get install maven

安装python

apt-get -y install python3-pip python3-dev build-essential
pip3 install --upgrade pip
rm /usr/bin/pip3
ln -s /usr/local/bin/pip3 /usr/bin/
mkdir ~/.pip
vim ~/.pip/pip.conf

加入:

[global]
index-url = http://pypi.douban.com/simple

[install]
trusted-host=pypi.douban.com

安装数据库 postgresql

apt-get install postgresql postgresql-contrib
sed -i "s/#\(include_if_exists.*\)/\1/" /etc/postgresql/9.3/main/postgresql.conf
echo "listen_addresses = '*'" >> /etc/postgresql/9.3/main/exists.conf
echo "host    all             all             0.0.0.0/0            md5" >> /etc/postgresql/9.3/main/pg_hba.conf
/etc/init.d/postgresql restart

设置数据库密码

sudo -u postgres psql postgres
postgres=# \password postgres
postgres=# \quit

安装 uuid 扩展

sudo -u postgres psql postgres
postgres=# CREATE EXTENSION "uuid-ossp";
CREATE EXTENSION
postgres=# select uuid_generate_v4(); 
          uuid_generate_v4           
--------------------------------------
a4829383-e6f9-419f-a567-196ccf72b190
(1 row)

postgres=# select uuid_generate_v1(); 
          uuid_generate_v1           
--------------------------------------
ffc5a0fa-156b-11e5-a568-6f5620948752
(1 row)

下载wildfly

su ubuntu
cd
wget http://download.jboss.org/wildfly/8.2.0.Final/wildfly-8.2.0.Final.tar.gz
tar xzvf wildfly-8.2.0.Final.tar.gz
mv wildfly-8.2.0.Final wildfly
rm wildfly-8.2.0.Final.tar.gz
echo 'JAVA_OPTS="$JAVA_OPTS -Djboss.bind.address=0.0.0.0"' >> /home/ubuntu/wildfly/bin/standalone.conf
echo 'JAVA_OPTS="$JAVA_OPTS -Djboss.bind.address.management=0.0.0.0"' >> /home/ubuntu/wildfly/bin/standalone.conf
echo 'ubuntu=35291eedea6d270cb71fe7dfd36d0c89' >> /home/ubuntu/wildfly/standalone/configuration/mgmt-users.properties
echo 'ubuntu=' >> /home/ubuntu/wildfly/standalone/configuration/mgmt-groups.properties
cd /home/ubuntu/wildfly/standalone/deployments
wget https://jdbc.postgresql.org/download/postgresql-9.4-1200.jdbc41.jar

建立数据库

sudo -u postgres createdb core -E UTF8 -T template0

配置wildfly数据源

cd /home/ubuntu/wildfly/bin
./jboss-cli.sh --connect

创建数据源的命令为:

data-source add --name=core --jndi-name=java:/core --driver-name=postgresql-9.4-1200.jdbc41.jar --connection-url=java:postgresql:core --user-name=postgres --password=postgres --transaction-isolation==TRANSACTION_READ_COMMITTED --min-pool-size=10 --max-pool-size=250

例如:

[[email protected]:9990 /] data-source add --name=core --jndi-name=java:/core --driver-name=postgresql-9.4-1200.jdbc41.jar --connection-url=java:postgresql:core --user-name=postgres --password=postgres --transaction-isolation==TRANSACTION_READ_COMMITTED --min-pool-size=10 --max-pool-size=250
[[email protected]:9990 /] exit

安装 rabbitmq

echo "deb http://www.rabbitmq.com/debian/ testing main" > /etc/apt/sources.list.d/rabbitmq.list
wget https://www.rabbitmq.com/rabbitmq-signing-key-public.asc
apt-key add rabbitmq-signing-key-public.asc
apt-get update
apt-get install rabbitmq-server
rabbitmq-plugins enable rabbitmq_management
rabbitmq-plugins enable rabbitmq_web_stomp
rabbitmqctl add_user webuser 123456
rabbitmqctl set_user_tags webuser monitoring
----权限----
rabbitmqctl  set_permissions -p / user '.*' '.*' '.*'

访问: http://IP:15672/

安装 mongodb

sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv EA312927
echo "deb http://repo.mongodb.org/apt/ubuntu trusty/mongodb-org/3.2 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.2.list
sudo apt-get update
sudo apt-get install -y mongodb-org

安装 redis

sudo apt-get install software-properties-common
apt-add-repository ppa:chris-lea/redis-server
apt-get update
apt-get install redis-server

安装 redis群集

至少准备3台服务器 修改 /etc/redis/redis.conf 文件:

bind 0.0.0.0
appendonly yes
cluster-enabled yes
cluster-config-file nodes.conf
cluster-node-timeout 5000
service redis-server restart

在其中一台上执行:

wget http://download.redis.io/releases/redis-3.0.7.tar.gz
tar xzvf redis-3.0.7.tar.gz
apt-get install ruby
cd redis-3.0.7
gem install redis

添加群集

./src/create --replicas 0 192.168.X.1:6379 192.168.X.2:6379 192.168.X.3:6379

测试

redis-cli -c
127.0.0.1:6379> set a 1
127.0.0.1:6379> get a 
"1"

zookeeper

安装 zookeeper

wget http://archive.apache.org/dist/zookeeper/stable/zookeeper-3.4.9.tar.gz
tar -zxvf zookeeper-3.4.9.tar.gz -C /opt
ln -s /opt/zookeeper-3.4.9 /opt/zookeeper
cp /opt/zookeeper/conf/zoo_sample.cfg /opt/zookeeper/conf/zoo.cfg
mkdir /opt/zookeeper/data
sed -i 's/dataDir=.*$/dataDir=\/opt\/zookeeper\/data/' /opt/zookeeper/conf/zoo.cfg

启动

/opt/zookeeper/bin/zkServer.sh start

关闭

/opt/zookeeper/bin/zkServer.sh stop

安装 zookeeper 面板 zkdash

apt-get install git python-pip libmysqld-dev python-dev libyaml-dev
git clone https://github.com/ireaderlab/zkdash.git
cd zkdash
pip install -r requirements.txt

安装 mysql 数据库

apt-get install mysql-server
mysqladmin create zkdash

修改数据库配置和连接属性:

vim conf/conf.yml

同步数据

python ./bin/syncdb.py

启动:

cd zkdash
screen python init.py -port=80

python 使用 zookeeper

安装:

pip install kazoo

使用:

from django.core.cache import cache
from kazoo.client import KazooClient
...
    def getmailPassword(self):
       password=cache.get('password')
       if password==None:
           zk = KazooClient(hosts='x.x.x.x:2181,x.x.x.x:2181')
           zk.start()
           password, stat = zk.get('/xxx/xxxx/xxxx')
           cache.set('password',password,3600)
       return password

安装 hadoop

安装

wget http://mirrors.cnnic.cn/apache/hadoop/common/hadoop-2.7.3/hadoop-2.7.3.tar.gz
tar -zxf hadoop-2.7.3.tar.gz -C /usr/local
cd /usr/local/
mv hadoop-2.7.3 hadoop
adduser hadoop
chown -R hadoop hadoop/
su hadoop
ssh-keygen -t rsa
cd ~/.ssh/
cat ./id_rsa.pub >> ./authorized_keys
echo "export JAVA_HOME=/usr/lib/jvm/java-7-openjdk-amd64" >> ~/.bashrc
source ~/.bashrc
/usr/local/hadoop/bin/hadoop version

配置

cat ./etc/hadoop/core-site.xml
<configuration>
        <property>
             <name>hadoop.tmp.dir</name>
             <value>file:/usr/local/hadoop/tmp</value>
             <description>Abase for other temporary directories.</description>
        </property>
        <property>
             <name>fs.defaultFS</name>
             <value>hdfs://localhost:9000</value>
        </property>
</configuration>
cat ./etc/hadoop/hdfs-site.xml
<configuration>
        <property>
             <name>dfs.replication</name>
             <value>1</value>
        </property>
        <property>
             <name>dfs.namenode.name.dir</name>
             <value>file:/usr/local/hadoop/tmp/dfs/name</value>
        </property>
        <property>
             <name>dfs.datanode.data.dir</name>
             <value>file:/usr/local/hadoop/tmp/dfs/data</value>
        </property>
</configuration>

执行 NameNode 的格式化:

./bin/hdfs namenode -format

修改

./etc/hadoop/hadoop-env.sh
./etc/hadoop/yarn-env.sh

设置 JAVA_HOME 为:/usr/lib/jvm/java-7-openjdk-amd64

启动

./sbin/start-dfs.sh

检查启动:

[email protected]:/usr/local/hadoop$ jps
25413 NameNode
25734 SecondaryNameNode
25522 DataNode
25909 Jps

WEB访问面板:

http://192.168.2.222:50070/

关闭

./sbin/stop-dfs.sh

安装 AeroGear

安装 wildfly 8.2

wget http://download.jboss.org/wildfly/8.2.0.Final/wildfly-8.2.0.Final.tar.gz
tar xzvf  wildfly-8.2.0.Final.tar.gz

安装 mysql

apt-get install mysql-server

安装 AeroGear UnifiedPush Server

环境准备

wget -c https://github.com/aerogear/aerogear-unifiedpush-server/releases/download/1.1.3.Final/aerogear-unifiedpush-server-1.1.3.Final-dist.tar.gz
tar xzvf aerogear-unifiedpush-server-1.1.3.Final-dist.tar.gz
cd aerogear-unifiedpush-server-1.1.3.Final
cd migrator
unzip ups-migrator-dist.zip
cp -r ~/aerogear-unifiedpush-server-1.1.3.Final/databases/src/main/resources/modules/com ~/wildfly-8.2.0.Final/modules/
cp ~/aerogear-unifiedpush-server-1.1.3.Final/migrator/ups-migrator/lib/mysql-connector-java-5.1.18.jar ~/wildfly-8.2.0.Final/modules/com/mysql/jdbc/main/

数据库准备

mysql -u root -p
mysql> create database unifiedpush default character set = "UTF8" default collate = "utf8_general_ci";
mysql> create database keycloak default character set = "UTF8" default collate = "utf8_general_ci";
mysql> create user 'unifiedpush'@'localhost' identified by 'unifiedpush';
mysql> GRANT SELECT,INSERT,UPDATE,ALTER,DELETE,CREATE,DROP,INDEX ON unifiedpush.* TO 'unifiedpush'@'localhost';
mysql> GRANT SELECT,INSERT,UPDATE,ALTER,DELETE,CREATE,DROP ON keycloak.* TO 'unifiedpush'@'localhost';
mysql> quit
~/wildfly-8.2.0.Final/bin/standalone.sh --server-config=standalone-full.xml -b 0.0.0.0

另外开一个终端执行创建Jboss数据源

~/wildfly-8.2.0.Final/bin/jboss-cli.sh --file=/root/aerogear-unifiedpush-server-1.1.3.Final/databases/mysql-database-config-wildfly.cli

建立数据库表

cd ~/aerogear-unifiedpush-server-1.1.3.Final/migrator/ups-migrator
cp liquibase-mysql-example.properties liquibase.properties
vim liquibase.properties 
修改 url=jdbc:mysql://localhost:3306/unifiedpush100li 为 url=jdbc:mysql://localhost:3306/unifiedpush
./bin/ups-migrator update

如下提示,表示成功更新:

Liquibase Update Successful

部署 aerogear-unifiedpush-server

cp ~/aerogear-unifiedpush-server-1.1.3.Final/servers/unifiedpush-auth-server.war ~/wildfly-8.2.0.Final/standalone/deployments/
cp ~/aerogear-unifiedpush-server-1.1.3.Final/servers/unifiedpush-server-wildfly.war ~/wildfly-8.2.0.Final/standalone/deployments/

看wildfly的日志

访问

http://x.x.x.x:8080/ag-push/
默认用户名 admin 密码 adm

安装 AeroGear SimplePush Server

下载并直接运行

git clone https://github.com/aerogear/aerogear-simplepush-server.git
cd aerogear-simplepush-server
mvn install -DskipTests=true
cd server-netty
mvn exec:java -Dexec.args="-host=localhost -port=7777 -tls=false -ack_interval=10000 -useragent_reaper_timeout=60000 -token_key=yourRandomToken"

部署到 wildfly 运行

cd wildfly-module/
mvn package -DskipTests=true
cp -r ~/aerogear-simplepush-server/wildfly-module/target/module/org ~/wildfly-8.2.0.Final/modules/system/layers/base/
~/wildfly-8.2.0.Final/bin/jboss-cli.sh --file=/root/aerogear-simplepush-server/wildfly-module/src/main/resources/wildfly-config.cli

安装tf支持

sed -i "s/archive.ubuntu.com/mirrors.163.com/" /etc/apt/sources.list
apt-get update
locale-gen --lang zh_CN.UTF-8
apt-get install python3-pip
pip3 install -i https://mirrors.aliyun.com/pypi/simple --upgrade pip
rm /usr/bin/pip3
ln -s /usr/local/bin/pip3 /usr/bin/pip3
pip3 install -i https://mirrors.aliyun.com/pypi/simple gunicorn flask image
pip3 install -i https://mirrors.aliyun.com/pypi/simple numpy tensorflow==1.15

常用维护命令

查看内存被什么消耗

ps -eo vsz,rss,pid,cmd --sort -vsz|head -n 20