搜索结果
来自Ubuntu中文
在本Wiki上新建名为“Network”的页面！另请查看搜索结果。
页面标题匹配
页面内容匹配
- ...rking>Admin) Jan 2007 (using the 3Com 3CRUSB10075). It does not appear in Network manager applet, presumably because WPA is not supported on Dapper install. [[category:CategoryNetworking]] [[category:CategoryWireless]]9 KB（1,295个字） - 2010年5月20日 (四) 00:57
- /etc/network/interfaces: ...ons, all I had to do was insert the module, and plug in my device, and the network was up and running!18 KB（2,941个字） - 2010年5月20日 (四) 00:56
- ...ifupdown utilities. This works fine with the Gnome network configuration ''network-admin'' (3) as well. Since Ubuntu 8.04, the driver works out of the box wit ...e to add these lines to your ''wlan0'' configuration in <code><nowiki>/etc/network/interfaces</nowiki></code>:9 KB（1,278个字） - 2010年5月20日 (四) 00:56
- 5. Finally run the following command to refresh the network settings:819字节（109个字） - 2009年5月12日 (二) 19:43
- If Ubuntu freezes durring the boot process at "Configuring Network Devices...". After letting it sit for a few minutes (I let mine sit for ha ...experiencing issues with this driver under feisty. These seem to stem from network-manager, and can be resolved in the following way:3 KB（494个字） - 2010年5月20日 (四) 00:56
- ...devices will just work out of the box. Simply install and configure in the Networking control panel. You should now have the latest madwifi driver working. Just configure your network and connect.12 KB（1,698个字） - 2009年11月17日 (二) 21:14
- === Step 5 - Enable Wireless and Re-Set Network Monitor === ...ss card light should pop on, and you should be able to connect to wireless networks!5 KB（805个字） - 2008年10月20日 (一) 01:13
- ...tall everything correctly and still you're not able to connect to any wifi network, you should try to install acer-acpi package. It often helps and you won't ...reless interfaces will be managed by [[UbuntuHelp:WifiDocs/NetworkManager |Network Manager]]. You may want to disable it for a short while during troubleshoot9 KB（1,498个字） - 2008年10月20日 (一) 01:13
- ...tall everything correctly and still you're not able to connect to any wifi network, you should try to install acer-acpi package. It often helps and you won't ...return the name of the interface as '''ethX'''. Check if you can scan for networks using8 KB（1,253个字） - 2008年12月16日 (二) 20:45
- ...l have a working Wireless card (I have a Belkin PCMCIA Wireless G Notebook Network Card F5D7011, which now works). ...return the name of the interface as '''ethX'''. Check if you can scan for networks using7 KB（1,228个字） - 2008年4月23日 (三) 12:05
- ...m the wiki to a forum but here's the best way to get ndiswapper setup with Network Manager. It's quick, easy and automated, also there is a supportive forum Don't use ifup and ifdown until you configure your /etc/network/interfaces file. (see below for instructions on how to do that [http://ubu17 KB（2,795个字） - 2010年5月20日 (四) 00:55
- ...drivers supplied with your card (Dell usually store a copy in `C:\DRIVERS\NETWORK\ADDON`); if you have a file called `bcmwl5.inf` or `bcmwl5a.inf` then keep ...that if you have access to a wireless LAN, you also have access to a wired network as a fallback.</li></ol>12 KB（1,894个字） - 2008年4月23日 (三) 12:04
- This page aims at getting your Broadcom BCM43xx based wireless network card working. The proprietary drivers can be activated under the desktop me 03:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN8 KB（1,129个字） - 2010年5月20日 (四) 00:55
- 0000:02:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface ...eed to do now is restart your machine, and use System -> Administration -> Networking to bring up your wireless device.9 KB（1,563个字） - 2008年10月20日 (一) 01:12
- 05:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev "$wget http://ftp.us.dell.com/network/R140747.EXE"3 KB（425个字） - 2009年11月17日 (二) 21:13
- ...work. Go up to and including step 4, after modprobing ndiswrapper the new network manager took over for me, worked like a charm - Alex Latchford (20070226) ...Also Step 5 should now be redundant as it should be picked up through the network-manager past step 4. - Alex Latchford (20071221)14 KB（2,209个字） - 2008年10月20日 (一) 01:12
- ...source driver. This driver supports unencrypted networks and WEP protected networks. However it looks like more advanced encryption (like WPA) is not availabl ...wrapper-common ndiswrapper-utils-1.8 ndisgtk wpasupplicant network-manager network-manager-gnome.2 KB（326个字） - 2008年10月19日 (日) 18:08
- Nextly you have to configure your network. To enable WPA support you must to install wpa_supplicant by command:2 KB（356个字） - 2007年11月30日 (五) 22:19
- This document specifies installation instructions to make the Netgear WG511 network card work with Ubuntu 6.06 (Dapper Drake). I have spent a great deal of tim * You can use the System->Administration->Network instead of the last step "Configure interface".4 KB（638个字） - 2009年11月17日 (二) 21:12
- === Setup The Network Interfaces === ...nd you need only an ESSID (no WPA or WEP), add the the following to ''/etc/network/interfaces'' <pre><nowiki>5 KB（862个字） - 2009年11月17日 (二) 21:12
