UbuntuHelp:IPMI

文章出处:

https://help.ubuntu.com/community/IPMI

点击翻译:

English

请不要直接编辑翻译本页，本页将定期与来源同步。

This page is about setting up IPMI on ubuntu.

1. apt-get install ipmitool
2. /usr/share/ipmitool/ipmi.init.basic
3. less /usr/share/doc/ipmitool/README.gz

a) BIOS POST:
     (i) Enable "Console Redirection" in BIOS Setup. For example, COM2 /
         19.2Kbps / 8N1
     (ii) Disable "Enable Console Redirection after POST" in BIOS setup.

I recommend these settings in your /boot/grub/menu.lst

serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1

#This additional line was also suggested also, but I only found its behavior annoying.
terminal --timeout=5 serial console

# defoptions=console=tty0 serial console=ttyS1,19200n8

# altoptions=(recovery mode) single console=tty0 serial console=ttyS1,19200n8

# xenkopt=console=tty0 serial console=ttyS1,19200n8

Be sure to run sudo update-grub Next, go into your /etc/event.d/ directory. Create a ttyS0 file from one of the other tty files. Change this line: exec /sbin/getty 19200 ttyS0 Do the same thing for ttyS1 Last, edit /etc/securetty and add ttyS1

Links

http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux http://www.ecst.csuchico.edu/~dranch/LINUX/IPMI/ipmi-on-linux.html - Howto Supermicro