UbuntuHelp:MythTV/Install/Server/OpenSSH
来自Ubuntu中文
Oneleaf(讨论 | 贡献)2007年5月24日 (四) 15:58的版本 (新页面: {{From|https://help.ubuntu.com/community/MythTV/Install/Server/OpenSSH}} {{Languages|UbuntuHelp:MythTV/Install/Server/OpenSSH}} === Install OpenSSH Server === From this point forward, I'd...)
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
Install OpenSSH Server
From this point forward, I'd recommend you have a ssh server running. It will save a lot of typing during setup and help with debugging problems later.
Re-insert the server install CD into the drive and:
$ sudo apt-get install openssh-server
Once it is installed and running, discover the ip address of this machine on your network, so you can log in remotely, if needed:
$ ifconfig
user@mythbackend:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1A:92:1C:BE:20 ##--->> inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6889755 errors:0 dropped:0 overruns:0 frame:0 TX packets:3859160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1252961706 (1.1 GiB) TX bytes:265742573 (253.4 MiB) Interrupt:50 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:718 errors:0 dropped:0 overruns:0 frame:0 TX packets:718 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:95836 (93.5 KiB) TX bytes:95836 (93.5 KiB)
Now you can log in remotely in a forwarded X session by replacing your user and address in the following command from the remote computer:
$ ssh -X -Y [email protected]
You can remove the server install CD at this time.