特殊:Badtitle/NS100:LightScribe

来自Ubuntu中文
Wikibot留言 | 贡献2008年10月19日 (日) 23:40的版本
跳到导航跳到搜索

{{#ifexist: :LightScribe/zh | | {{#ifexist: LightScribe/zh | | {{#ifeq: {{#titleparts:LightScribe|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:LightScribe|1|-1|}} | zh | | }}

LightScribe support for Linux.

Introduction

La'Cie has released the first software that allows burning labels on LightScribe media using LightScribe drives under Linux.

Prerequisites

  • x86 distribution of Ubuntu 6.06 LTS (Dapper) or newer
  • LightScribe-enabled DVD/CD burner
  • LightScribe media
  • Alien package, to install RPM packaged software in Ubuntu. If you don't have it installed or don't know if you do, use this command:
sudo apt-get install alien
  • Install old C library if you have Ubuntu 7.04 or newer:
sudo apt-get install libstdc++5

Installing

  1. Download the software from La'Cie
    1. LightScribe Host Software for Linux: <
      > [1]
    2. LightScribe Labeler for Linux <
      > [2]
  2. Install the packages using Alien
sudo alien -i lightscribe-1.8.15.1-linux-2.6-intel.rpm
sudo alien -i 4L-1.0-r6.i586.rpm

Note: The packages must be installed in this order! Additionally, newer software may be available at http://www.lightscribe.com/downloadSection/linux/index.aspx

Enable Enhanced Contrast

Activating the higher contrast print mode will let you print higher quality labels, at the cost of a bit longer burn time.

  1. Run the Enhanced Contrast Utility for Linux
sudo /usr/lib/lightscribe/elcu.sh
  1. Enter 1 to turn on Enhanced Contrast, or 2 to disable it.

This tip is documented on the LightScribe Pre-Release Software Evaluation page.

Links