EnemyTerritory
需求条件
- 您需要安装 Nvidia 或者 ATI 显卡驱动 - 查看 BinaryDriverHowto
- libgtk1.2 也必须安装:
apt-get install libgtk1.2
(命令行)
Download
Full game
Download the game either from FileShack
or
wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60.x86.run
It might be that a newer version is available in the meantime. Check FileShack or your favourite download site.
Patch
If you have already installed a ET version you can download a patch Download patches from the FileShack
or
wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60-update.x86.run
It might be that a newer version is available in the meantime. Check on FileShack
Installation
Full Game
Run the file from where you have downloaded
sudo sh ./et-linux-2.60.x86.run
and it should bring up a GUI to help you through the process. (By default PB is selected, keep this intact since you can't join a lot of servers without it).
Update Old Versions of Necessary
To apply the patch, run the file from where you have downloaded
sudo sh ./et-linux-2.60-update.x86.run
Start
Just run Applications > Other > Enemy Territory.
Alternatively, in a console just type:
et
Troubleshooting
Permission Errors
Change the permission with this command:
sudo chmod +x et-linux-2.60.x86.run sudo chmod +x et-linux-2.60-update.x86.run
Downloading Maps
Verify that the directory that it downloads maps to is chmoded for access by your user! If you do not do this, you'll be unable to download and install the maps & other files you need to join games!
sudo chown -R user:user ~/.etwolf/
Replace user:user
with your own user name & user group (usually the same name, in Ubuntu).
Sound Issues
If you don't get any sound try killing esd before play:
killall esd; et; esd
If you really need to do this in order to play, it might come in handy to create a script for it. Create a new text file called start-et and add this text to it:
#!/bin/sh killall esd et esd
Now you'll have to make it executable and put it somewhere where you can execute it:
chmod a+x start-et sudo cp start-et /usr/bin
If you don't want to put it on /usr/bin you don't have to, but remember to give a full path to this script whenever you execute it or to be in the same directory as the script.
If you don't get any sound and see the following error message message in the console:
/dev/dsp: Input/output error Could not mmap /dev/dsp
you will need to do the following in addition to the step above:
sudo -s echo "et.x86 0 0 direct" > /proc/asound/card0/pcm0p/oss echo "et.x86 0 0 disable" > /proc/asound/card0/pcm0c/oss
More help
Check also the Forum Thread of ET
文章来源:官方WIKI
翻译人员:
校对人员:
文章状态:等待翻译