特殊:Badtitle/NS100:ExpressCard

来自Ubuntu中文
Wikibot留言 | 贡献2007年11月22日 (四) 12:33的版本
跳到导航跳到搜索
可打印版本不再受到支持且可能有渲染错误。请更新您的浏览器书签并改用浏览器默认打印功能。

{{#ifexist: :ExpressCard/zh | | {{#ifexist: ExpressCard/zh | | {{#ifeq: {{#titleparts:ExpressCard|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:ExpressCard|1|-1|}} | zh | | }}

Introduction

Express Cards are like PCMIA cards but much faster.They come in two sizes one larger and one smaller. You can plug a card made for a smaller slot into a bigger slot but not vice versa. Currently there are few cards in this format.

see http://en.wikipedia.org/wiki/Expresscard for more information.

Installation

The installation of a ExpressCard should be trivial. The default kernel has support for "PCI Express Hotplug driver". The kernel option CONFIG_HOTPLUG_PCI_PCIE should be set and you should have a module called pciehp in your system.

Kernel Module

sudo modprobe pciehp pciehp_force=1


Troubleshooting

Load the module with the option "pciehp_force=1", otherwise some errors are generated, because the ACPI firmware lacks support for the _OSC function:

[  290.828000] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[  290.828000] Evaluate _OSC Set fails. Status = 0x0005
[  290.828000] Evaluate _OSC Set fails. Status = 0x0005
[  290.828000] pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
[  290.828000] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[  290.828000] Evaluate _OSC Set fails. Status = 0x0005
[  290.828000] Evaluate _OSC Set fails. Status = 0x0005
[  290.828000] pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3
[  290.828000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4