Docker:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
Oneleaf留言 | 贡献
Oneleaf留言 | 贡献
第10行: 第10行:
  sudo service docker start
  sudo service docker start


== 安装 shipyard 面板 ==
== 安装 portainer 面板 ==  
  curl -s https://shipyard-project.com/deploy | bash -s
  docker run -d -p 9000:9000 portainer/portainer


== 安装网络 ==
== 安装网络 ==

2016年12月28日 (三) 17:22的版本

安装

sudo apt-get install apt-transport-https ca-certificates
sudo apt-key adv \
              --keyserver hkp://ha.pool.sks-keyservers.net:80 \
              --recv-keys 58118E89F3A912897C070ADBF76221572C52609D
echo "deb https://apt.dockerproject.org/repo ubuntu-xenial main" | sudo tee /etc/apt/sources.list.d/docker.list
sudo apt-get update
sudo apt-get install linux-image-extra-$(uname -r) linux-image-extra-virtual
sudo apt-get install docker-engine
sudo service docker start

安装 portainer 面板

docker run -d -p 9000:9000 portainer/portainer

安装网络

git clone https://github.com/jpetazzo/pipework.git
sudo cp ./pipework/pipework /usr/local/bin/
sudo apt-get install iputils-arping bridge-utils -y

# 注意配置这个会断网
sudo brctl addbr br0
sudo ip addr add 192.168.1.4/24 dev br0
sudo ip addr del 192.168.1.4/24 dev eno1
sudo ip link set dev br0 up
sudo brctl addif br0 eno1
sudo ip route del default
sudo ip route add default via 192.168.1.1 dev br0
# echo 'DOCKER_OPTS="-b=br0"' >> /etc/default/docker
# 设置这个需要关闭掉默认的 docker0 ,否则默认还是会走这个。

sudo docker  ps
sudo pipework br0 test1 192.168.1.10/24

主机网络配置参考

cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#auto eno1
#iface eno1 inet dhcp

auto br0
iface br0 inet static
    address 192.168.1.233
    netmask 255.255.255.0
    gateway 192.168.1.3
    bridge_ports eno1
    bridge_stp off
    dns-nameservers 192.168.1.3 192.168.1.2
# 可以指定容器的网络网关为服务器的IP,当然也可以不用指定,直接使用内部默认的网关172.17.0.1。 
## pipework br0 -i eth1 test4 192.168.1.11/[email protected]
# pipework br0 -i eth1 test4 192.168.1.11/24

参考地址

https://docs.docker.com/engine/installation/linux/ubuntulinux/

https://github.com/shipyard/shipyard

https://toutiao.io/posts/496585/app_preview

https://opskumu.gitbooks.io/docker/content/chapter6.html

http://www.linuxidc.com/Linux/2015-02/113783.htm

其他客户端初始命令

sed -i "s/archive.ubuntu.com/mirrors.163.com/" /etc/apt/sources.list
apt-get update
apt-get install net-tools iputils-ping