“UbuntuHelp:UKSpeedtouchDSLHowTo”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第12行: | 第12行: | ||
wget http://ftp.linux.it/pub/People/md/warez/speedtouch-firmware.tgz | wget http://ftp.linux.it/pub/People/md/warez/speedtouch-firmware.tgz | ||
sudo tar xfvz speedtouch-firmware.tgz | sudo tar xfvz speedtouch-firmware.tgz | ||
− | + | sudo cp ./firmware/speedtch-1.bin.4 /lib/firmware/speedtch-1.bin | |
− | sudo cp speedtch-1.bin.4 /lib/firmware/speedtch-1.bin | + | sudo cp ./firmware/speedtch-2.bin.4 /lib/firmware/speedtch-2.bin |
− | sudo cp speedtch-2.bin.4 /lib/firmware/speedtch-2.bin | + | |
</nowiki></pre> | </nowiki></pre> | ||
or | or | ||
<pre><nowiki> | <pre><nowiki> | ||
wget http://ubudsl.googlepages.com/speedtouch-firmware_0.1-7_all.deb | wget http://ubudsl.googlepages.com/speedtouch-firmware_0.1-7_all.deb | ||
− | sudo dpkg -x speedtouch-firmware_0.1-7_all.deb ./ | + | sudo dpkg -x speedtouch-firmware_0.1-7_all.deb ./speedtouch-firmware_0.1-7_all |
− | sudo | + | sudo cp ./speedtouch-firmware_0.1-7_all/lib/firmware/speedtch-1.bin.4 /lib/firmware/speedtch-1.bin |
− | + | sudo cp ./speedtouch-firmware_0.1-7_all/lib/firmware/speedtch-2.bin.4 /lib/firmware/speedtch-2.bin | |
− | + | ||
− | sudo cp speedtch-2.bin.4 /lib/firmware/speedtch-2.bin | + | |
</nowiki></pre> | </nowiki></pre> | ||
* After installing the firmware you may unplug and replug the modem to load it. | * After installing the firmware you may unplug and replug the modem to load it. | ||
第32行: | 第29行: | ||
* Edit with | * Edit with | ||
<pre><nowiki> | <pre><nowiki> | ||
− | + | gksudo gedit /etc/ppp/peers/adsl | |
+ | </nowiki></pre> | ||
+ | (or for Kubuntu) | ||
+ | <pre><nowiki> | ||
+ | kdesudo kwrite /etc/ppp/peers/adsl | ||
</nowiki></pre> | </nowiki></pre> | ||
to include the '''username''' given to you by your '''isp''' and the VP and VC identifiers 0.38 (Poland, TPSA neostrada tp 0.35) (they may differ for other ISPs). | to include the '''username''' given to you by your '''isp''' and the VP and VC identifiers 0.38 (Poland, TPSA neostrada tp 0.35) (they may differ for other ISPs). | ||
* Edit the | * Edit the | ||
<pre><nowiki> | <pre><nowiki> | ||
− | + | gksudo gedit /etc/ppp/pap-secrets | |
+ | </nowiki></pre> | ||
+ | (or for Kubuntu) | ||
+ | <pre><nowiki> | ||
+ | kdesudo kwrite /etc/ppp/pap-secrets | ||
</nowiki></pre> | </nowiki></pre> | ||
file (in /etc/ppp/) and update them with the '''username''' and '''password''' provided by your '''isp''' by adding to each a line in the format | file (in /etc/ppp/) and update them with the '''username''' and '''password''' provided by your '''isp''' by adding to each a line in the format |
2008年12月16日 (二) 20:28的版本
Introduction
This document explains how to set up a DSL broadband connection for people living in the UK using a Thomson Speedtouch 330 USB modem or other similar modems supported by the speedtch
driver.
(UsbAdslModem/SpeedTouch)
Instructions
- With modern kernels (>= 2.6.10) you do not need anything other than the
ppp
andlibatm1
packages. Thespeedtouch
package is not needed. - Download the modem firmware from the Alcatel web site (site down - mirror to zip) and unpack it with the firmware extractor. If this looks complex, you can just download and install an unofficial firmware package
speedtouch-firmware.tgz or speedtouch-firmware_0.1-7_all.deb.
- Firmware (speedtch-*.bin.4) for the (silver) revision 4 modem.
wget http://ftp.linux.it/pub/People/md/warez/speedtouch-firmware.tgz sudo tar xfvz speedtouch-firmware.tgz sudo cp ./firmware/speedtch-1.bin.4 /lib/firmware/speedtch-1.bin sudo cp ./firmware/speedtch-2.bin.4 /lib/firmware/speedtch-2.bin
or
wget http://ubudsl.googlepages.com/speedtouch-firmware_0.1-7_all.deb sudo dpkg -x speedtouch-firmware_0.1-7_all.deb ./speedtouch-firmware_0.1-7_all sudo cp ./speedtouch-firmware_0.1-7_all/lib/firmware/speedtch-1.bin.4 /lib/firmware/speedtch-1.bin sudo cp ./speedtouch-firmware_0.1-7_all/lib/firmware/speedtch-2.bin.4 /lib/firmware/speedtch-2.bin
- After installing the firmware you may unplug and replug the modem to load it.
- Copy the /usr/share/doc/ppp/examples/peers-pppoa file to e.g. /etc/ppp/peers/adsl. The following command will preform this action:
sudo cp /usr/share/doc/ppp/examples/peers-pppoa /etc/ppp/peers/adsl
- Edit with
gksudo gedit /etc/ppp/peers/adsl
(or for Kubuntu)
kdesudo kwrite /etc/ppp/peers/adsl
to include the username given to you by your isp and the VP and VC identifiers 0.38 (Poland, TPSA neostrada tp 0.35) (they may differ for other ISPs).
- Edit the
gksudo gedit /etc/ppp/pap-secrets
(or for Kubuntu)
kdesudo kwrite /etc/ppp/pap-secrets
file (in /etc/ppp/) and update them with the username and password provided by your isp by adding to each a line in the format
"username@isp" "*" "password"
and/or
sudo cp /etc/ppp/pap-secrets /etc/ppp/chap-secrets
- After the boot, you will be able to start the connection with the usual commands
pon adsl
- (FIXME: document how to create an udev script to automatically start the connection after the modem has been initialised.)