特殊:Badtitle/NS100:IPMI:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
Wikibot留言 | 贡献
新页面: {{From|https://help.ubuntu.com/community/IPMI}} {{Languages|UbuntuHelp:IPMI}} This page is about setting up IPMI on ubuntu. # apt-get install ipmitool # /usr/share/ipmitool/ipmi.init.ba...
 
Wikibot留言 | 贡献
无编辑摘要
第2行: 第2行:
{{Languages|UbuntuHelp:IPMI}}
{{Languages|UbuntuHelp:IPMI}}
This page is about setting up IPMI on ubuntu.
This page is about setting up IPMI on ubuntu.
# apt-get install ipmitool
# apt-get install ipmitool
# /usr/share/ipmitool/ipmi.init.basic
# /usr/share/ipmitool/ipmi.init.basic
# less /usr/share/doc/ipmitool/README.gz
# less /usr/share/doc/ipmitool/README.gz
<pre><nowiki>
<pre><nowiki>
a) BIOS POST:
a) BIOS POST:
第16行: 第11行:
(ii) Disable "Enable Console Redirection after POST" in BIOS setup.
(ii) Disable "Enable Console Redirection after POST" in BIOS setup.
</nowiki></pre>
</nowiki></pre>
I recommend these settings in your /boot/grub/menu.lst
I recommend these settings in your /boot/grub/menu.lst
<pre><nowiki>
<pre><nowiki>
serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
#This additional line was also suggested also, but I only found its behavior annoying.
#This additional line was also suggested also, but I only found its behavior annoying.
terminal --timeout=5 serial console
terminal --timeout=5 serial console
# defoptions=console=tty0 serial console=ttyS1,19200n8
# defoptions=console=tty0 serial console=ttyS1,19200n8
# altoptions=(recovery mode) single console=tty0 serial console=ttyS1,19200n8
# altoptions=(recovery mode) single console=tty0 serial console=ttyS1,19200n8
# xenkopt=console=tty0 serial console=ttyS1,19200n8
# xenkopt=console=tty0 serial console=ttyS1,19200n8
</nowiki></pre>
</nowiki></pre>
Be sure to run sudo update-grub
Be sure to run sudo update-grub
Next, go into your /etc/event.d/  directory.  Create a  ttyS0 file from one of the other tty files. Change this line:  exec /sbin/getty 19200 ttyS0
Next, go into your /etc/event.d/  directory.  Create a  ttyS0 file from one of the other tty files. Change this line:  exec /sbin/getty 19200 ttyS0
Do the same thing for ttyS1
Do the same thing for ttyS1
Last, edit /etc/securetty and add ttyS1
Last, edit /etc/securetty and add ttyS1
== Links ==
== Links ==
http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux
http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux
http://www.ecst.csuchico.edu/~dranch/LINUX/IPMI/ipmi-on-linux.html - Howto Supermicro
http://www.ecst.csuchico.edu/~dranch/LINUX/IPMI/ipmi-on-linux.html - Howto Supermicro


[[category:UbuntuHelp]]
[[category:UbuntuHelp]]

2007年11月30日 (五) 18:06的版本

{{#ifexist: :IPMI/zh | | {{#ifexist: IPMI/zh | | {{#ifeq: {{#titleparts:IPMI|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:IPMI|1|-1|}} | zh | | }}

This page is about setting up IPMI on ubuntu.

  1. apt-get install ipmitool
  2. /usr/share/ipmitool/ipmi.init.basic
  3. less /usr/share/doc/ipmitool/README.gz
a) BIOS POST:
(i) Enable "Console Redirection" in BIOS Setup. For example, COM2 /
19.2Kbps / 8N1
(ii) Disable "Enable Console Redirection after POST" in BIOS setup.

I recommend these settings in your /boot/grub/menu.lst

serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
#This additional line was also suggested also, but I only found its behavior annoying.
terminal --timeout=5 serial console
# defoptions=console=tty0 serial console=ttyS1,19200n8
# altoptions=(recovery mode) single console=tty0 serial console=ttyS1,19200n8
# xenkopt=console=tty0 serial console=ttyS1,19200n8

Be sure to run sudo update-grub Next, go into your /etc/event.d/ directory. Create a ttyS0 file from one of the other tty files. Change this line: exec /sbin/getty 19200 ttyS0 Do the same thing for ttyS1 Last, edit /etc/securetty and add ttyS1

Links

http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux http://www.ecst.csuchico.edu/~dranch/LINUX/IPMI/ipmi-on-linux.html - Howto Supermicro