“UbuntuHelp:ExpressCard”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第3行: | 第3行: | ||
== Introduction == | == Introduction == | ||
Express Cards are like PCMIA cards but much faster.They come in two sizes one larger and one smaller. You can plug a card made for a smaller slot into a bigger slot but not vice versa. Currently there are few cards in this format. | Express Cards are like PCMIA cards but much faster.They come in two sizes one larger and one smaller. You can plug a card made for a smaller slot into a bigger slot but not vice versa. Currently there are few cards in this format. | ||
− | |||
see http://en.wikipedia.org/wiki/Expresscard for more information. | see http://en.wikipedia.org/wiki/Expresscard for more information. | ||
− | |||
== Installation == | == Installation == | ||
− | |||
The installation of a ExpressCard should be trivial. The default kernel has support for "PCI Express Hotplug driver". The kernel option ''CONFIG_HOTPLUG_PCI_PCIE'' should be set and you should have a module called ''pciehp'' in your system. | The installation of a ExpressCard should be trivial. The default kernel has support for "PCI Express Hotplug driver". The kernel option ''CONFIG_HOTPLUG_PCI_PCIE'' should be set and you should have a module called ''pciehp'' in your system. | ||
− | |||
=== Kernel Module === | === Kernel Module === | ||
<pre><nowiki> | <pre><nowiki> | ||
sudo modprobe pciehp pciehp_force=1 | sudo modprobe pciehp pciehp_force=1 | ||
</nowiki></pre> | </nowiki></pre> | ||
− | |||
− | |||
=== Troubleshooting === | === Troubleshooting === | ||
Load the module with the option "pciehp_force=1", otherwise some errors are generated, because the ACPI firmware lacks support for the _OSC function: | Load the module with the option "pciehp_force=1", otherwise some errors are generated, because the ACPI firmware lacks support for the _OSC function: |
2007年11月30日 (五) 17:10的版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
Introduction
Express Cards are like PCMIA cards but much faster.They come in two sizes one larger and one smaller. You can plug a card made for a smaller slot into a bigger slot but not vice versa. Currently there are few cards in this format. see http://en.wikipedia.org/wiki/Expresscard for more information.
Installation
The installation of a ExpressCard should be trivial. The default kernel has support for "PCI Express Hotplug driver". The kernel option CONFIG_HOTPLUG_PCI_PCIE should be set and you should have a module called pciehp in your system.
Kernel Module
sudo modprobe pciehp pciehp_force=1
Troubleshooting
Load the module with the option "pciehp_force=1", otherwise some errors are generated, because the ACPI firmware lacks support for the _OSC function:
[ 290.828000] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 [ 290.828000] Evaluate _OSC Set fails. Status = 0x0005 [ 290.828000] Evaluate _OSC Set fails. Status = 0x0005 [ 290.828000] pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 [ 290.828000] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 [ 290.828000] Evaluate _OSC Set fails. Status = 0x0005 [ 290.828000] Evaluate _OSC Set fails. Status = 0x0005 [ 290.828000] pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3 [ 290.828000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4