特殊:Badtitle/NS100:UbuntuStudioPreparation:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
Wikibot留言 | 贡献
无编辑摘要
Wikibot留言 | 贡献
无编辑摘要
 
(未显示同一用户的4个中间版本)
第1行: 第1行:
{{From|https://help.ubuntu.com/community/UbuntuStudioPreparation}}
{{From|https://help.ubuntu.com/community/UbuntuStudioPreparation}}
{{Languages|UbuntuHelp:UbuntuStudioPreparation}}
{{Languages|UbuntuHelp:UbuntuStudioPreparation}}
Setting up your system for an audio and video workstation currently requires several steps. This was updated with Ubuntu 8.04 (Hardy) in mind.
----
For most users, this steps are to be done if you want to setup multimedia production with a standard Ubuntu installation (means without installing Ubuntu Studio)
'''''You will find on this page what to do if you want to setup a multimedia production workstation with a standard Ubuntu installation (means without installing Ubuntu Studio).'''''
However, user with Firewire hardware, pci professional sound card, even on Ubuntu Studio 8.04, or simply having questions may find tips on this page. First of all, be sure to have multiverse, universe, main and restricted repository activated in Synaptic.
----
However, users with Firewire hardware, pci professional sound card, even on Ubuntu Studio, or simply having questions, may find tips on this page. First of all, be sure to have the multiverse, universe, main and restricted repositories activated in Synaptic.
Everything on this page has been tested and works successfully with Ubuntu Lucid LTS Beta. As Lucid is at a beta stage, it may be some mistakes or bugs in this page.
Please note that only LTS and current version will be documented in time on this tutorial.
=== Install the "must have" packages ===
=== Install the "must have" packages ===
If you prefer to install the packages with Synaptic, you can.
'''''If you prefer to install the packages with Synaptic, you can.'''''
==== The basics ====
==== The basics ====
If you are still unsure of which you would like to use, or where to start, a sane set of defaults can be installed by doing this:
If you are still unsure of which you would like to use, or where to start, a sane set of defaults can be installed by doing this:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install ardour hydrogen jackd jack-rack qjackctl seq24 vkeybd zynaddsubfx patchage vlc kino pitivi acidrip ubuntu-restricted-extras ubuntustudio-controls ubuntustudio-menu
sudo apt-get install ardour audacious hydrogen jackd jack-rack qjackctl seq24 vkeybd zynaddsubfx patchage vlc kino pitivi acidrip ubuntu-restricted-extras ubuntustudio-menu gcdmaster
</nowiki></pre>
</nowiki></pre>
ardour is a very good audio recorder and sequencer, seq24 is a midi sequencer, vkeybd is a virtual midi keyboard, zynaddsubfx a very good modular synth, hydrogen is a drum kit and sequencing application, jackd is the sound daemon and qjackctl is to setup it well with a GUI, patchage is a very usefull application to patch audio/midi applications and the I/O.
Ardour is a very good audio recorder and sequencer, Audacious a music player with plugin for jackd, seq24 is a midi sequencer, vkeybd is a virtual midi keyboard, zynaddsubfx a very good modular synth, hydrogen is a drum kit and sequencing application, jackd is the sound daemon and qjackctl is to setup it well with a GUI, patchage is a very useful application to patch audio/midi applications and the I/O, gcdmaster allows creation of a master audio cd.
==== Specific pci and usb hardware ====
==== Specific Pci and USB hardware ====
First of all, check on this page if your card is supported : http://alsa-project.org/main/index.php/Matrix:Main
First of all, check on this page if your card is supported : http://alsa-project.org/main/index.php/Matrix:Main
If your card is said to be supported, but you know is it a low latency sound card, do:
If your card is said to be supported, but you know it is a low latency sound card, install the Medibuntu repository and do:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui
sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui alsa-firmware
</nowiki></pre>
</nowiki></pre>
If your card is still not supported, you may find the alsa-firmware in the Medibuntu repository. In order to add it to Synaptic, please go at http://medibuntu.org. Then, do:  
Informations about Medibuntu and how to add it can be found here: http://www.medibuntu.org/
Your card will work at reboot. For card like RME hdsp, you may want to run manually the command line "hdsploader". Feel free of course to create a shortcut in your menu or Gnome panel.
==== Effect Plugins, Instruments and Codecs ====
Install the LADSPA plugins so you get some effect plugins for your audio applications to use.
For audio processing:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install alsa-firmware
sudo apt-get install blop caps cmt fil-plugins rev-plugins swh-plugins tap-plugins
</nowiki></pre>
</nowiki></pre>
And your card will work. For card like RME hdsp, you may need to run manually the command line "hdsploader" in a terminal if the system don't launch it by himself. Feel free of course to create a shortcut in your menu or Gnome panel.
For synthesizers:
==== Firewire (ieee1393 / raw1394) sound cards and cameras ====
If you can't get your Firewire sound card working with Freebob and Jack, please first of all have a look at http://freebob.sourceforge.net/index.php/List_of_Supported_Devices and check if your sound card is supported.
If you can't access to your camera through firewire (ieee1394), you have the same problem.
Simply do that:
<pre><nowiki>
<pre><nowiki>
sudo adduser <username> disk
sudo apt-get install blepvco mcp-plugins omins
</nowiki></pre>
Think to change <username> below with the concerned user name. So you will have the access to raw1394 without being root.
NB: it may cause a security problem if you are using ieee1394 for other than hard disk, camera or sound card connection, for exemple with network
==== Effect Plugins and Instruments ====
Install the LADSPA plugins so you get some effect plugins for your audio applications to use:
<pre><nowiki>
  sudo apt-get install blop caps cmt fil-plugins ladspa-sdk mcp-plugins omins swh-plugins tap-plugins vcf-plugins
</nowiki></pre>
</nowiki></pre>
Install the DSSI host and plugins:
Install the DSSI host and plugins:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install dssi-host-jack dssi-example-plugins dssi-plugin-fluidsynth dssi-plugin-hexter dssi-plugin-xsynth
sudo apt-get install dssi-host-jack dssi-example-plugins fluidsynth-dssi hexter xsynth-dssi
</nowiki></pre>
</nowiki></pre>
Install the video codecs
More infos are provided below, see the "VST Instruments" section.
Install the video codecs:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install gstreamer0.10-plugins-good gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse gstreamer0.10-plugins-ugly gstreamer0.10-plugins-ugly-multiverse gstreamer0.10-plugins-tools ffmpeg
sudo apt-get install gstreamer0.10-plugins-good gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse gstreamer0.10-plugins-ugly gstreamer0.10-plugins-ugly-multiverse ffmpeg
</nowiki></pre>
</nowiki></pre>
=== Real Time Kernel & Xruns ===
If you use the Medibuntu repository, you can add other codecs, and encrypted DVD support to Ubuntu:
Xruns. What are they? Well, simply put, either they are buffer underruns or buffer overruns.
* A buffer underrun happens during playback, when your sound card tries to read data from the buffer, but your software has not yet filled it.
* A buffer overruns happens during recording, when your sound card tries to write data to buffer, but your software has not yet emptied it.
The only acceptable time to receive Xruns is during application startup. Currently, for whatever reason, JACK applications usually cause a few Xruns as it connects to the JACK server, but these will not hurt you in any way. The most critical time to not receive an Xrun is during recording, because it causes a permanent glitch in your audio, which may or may not be easily heard.
So now you should understand basically why you want to avoid Xruns. They will cause issues with your recordings, or cause annoyance during playback. Thankfully, you can get these down to a minimum, if not eliminate them altogether.
The better way to avoid X-Runs is to install a real time kernel, optimized for audio production with low latency. You can simply do:
<pre><nowiki>
<pre><nowiki>
sudo apt-get install linux-rt
sudo apt-get install non-free-codecs libdvdcss2
</nowiki></pre>
</nowiki></pre>
Then follow the advice below under 'Real-Time Support' and you should be set up to run jackd and other applications in real time low latency mode. You need to reboot after you've installed the low-latency package and made the changes below. Make sure you reboot into the right kernel - it will come up in the list on the boot screen, but may not be set as the default option.
Please see http://medibuntu.org for more information. Think to update, because Medibuntu may provide more complete version of VLC, Mplayer, Mencoder, etc...
Take care, with some nVidia graphic card, the linux-rt kernell will not work with nvidia-glx-new driver on amd64 cpu.
=== VST Instruments ===
For licence purpose (Steinberg licence for VST and VSTi are not fully compliant with GPL, and so are a bit restricted) it is not officialy possible to use VST and VSTi under Ubuntu at the moment. See the instructions in the "Backports" section for more informations, if you really need them.
=== Real-Time Support ===
=== Real-Time Support ===
After you've got the kernel you still need to set up real-time access for your applications.
You may want to enable the real time support if you work at very low latency (less than 10ms), producing audio or using virtual instruments in "live performance".
All you have to do for this is give your ''audio'' group permissions to access the ''rtprio'', ''nice'', and ''memlock'' limits. To do this, you just need to run these commands, which will add some lines to the file /etc/security/limits.conf:
All you have to do for this is give your "audio" group permissions to access the ''rtprio'', and ''memlock'' limits. To do this, you just need to run these commands, which will add some lines to the file /etc/security/limits.conf and add you to the audio user group.:
<pre><nowiki>
<pre><nowiki>
sudo su -c 'echo @audio - rtprio 99 >> /etc/security/limits.conf'
sudo su -c 'echo @audio - rtprio 99 >> /etc/security/limits.conf'
sudo su -c 'echo @audio - nice -10 >> /etc/security/limits.conf'
sudo su -c 'echo @audio - memlock unlimited >> /etc/security/limits.conf'
sudo su -c 'echo @audio - memlock 250000 >> /etc/security/limits.conf'
sudo adduser <username> audio
</nowiki></pre>
</nowiki></pre>
The memlock line determines how much of your memory can be locked by audio processes.  Some recommend setting this as half of your total memory (in K).  See [http://tapas.affenbande.org/wordpress/?page_id=73 Florian Paul Schmidt's page].
Of course, think to replace <username>.
And that is it! You're all set for real-time access!
These value are suggested by [http://jackaudio.org/faq http://jackaudio.org/faq]. The memlock line determines how much of your memory can be locked by audio processes.  Some recommend setting this as half of your total memory (RAM, in KB).  See [http://tapas.affenbande.org/wordpress/?page_id=73 Florian Paul Schmidt's page].
=== ALSA Sequencer ===
'''<u>Note: Modifying /etc/security/limits.conf Should Not Be Required Anymore</u> <<BR>>
If you can not have midi sequencing enabled, or if you have midi error message, the Alsa midi sequencer module of the kernel may not be loaded. Try that:
Beginning with the Ubuntu package jack-audio-connection-kit-0.118+svn3796-1ubuntu2 editing of /etc/security/limits.conf should not be required. JACK will write the following during post-installation to /etc/security/limits.d/audio.conf:
# generated by jackd's postinst. <<BR>>
# Do not edit this file by hand, use <<BR>>
# dpkg-reconfigure -p high jack <<BR>>
# instead <<BR>>
@audio - rtprio 99 <<BR>>
@audio - memlock unlimited <<BR>>
#@audio - nice -19 <<BR>>
Please note that creating or modifying /etc/security/limits.conf may cause conflicts with the JACK written /etc/security/limits.d/audio.conf settings.
Email from Linux Audio Users mailing list: http://linuxaudio.org/mailarchive/lau/2010/3/5/166428 <<BR>>
Debian Bug #507248: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507248 <<BR>>
-- Scott Lavender 4/25/10'''
Then, you may want to install the -lowlatency kernel, you can simply do:
<pre><nowiki>
<pre><nowiki>
  sudo modprobe snd-seq
  sudo apt-get install linux-lowlatency linux-headers-lowlatency
</nowiki></pre>
</nowiki></pre>
If it works, to have your system load it at bootup, you have to add it to the /etc/modules file, do:
If you still experience Xruns or you have a firewire sound card supported by the FFADO project, you may want to install the -rt kernel:
<pre><nowiki>
<pre><nowiki>
  sudo su -c 'echo snd-seq >> /etc/modules'
  sudo apt-get install linux-rt linux-headers-rt
</nowiki></pre>
</nowiki></pre>
=== USB MIDI Keyboard/USB Secondary Sound Card Fix ===
Take care, with some nVidia or AMD/ATI graphic card, the -rt and -lowlatency kernels may not work well with restricted driver.
In Hardy, this should be already done. You can see below how to tweak if necessary.
Always keep a -generic kernel on your Grub list. If for some reason you can't boot with the -rt kernel, it will be very usefull.
=== Configuration of more than one sound card ===
Restart Ubuntu, and it should be enabled. You may need to edit Grub preferences to choose the default boot kernel.
=== Configuration of more than one pci/usb sound/midi card/keyboard/control surface ===
When having more than one soundcard, it often appears that one card is one time the default device, other times it's an other one.  This has led to a lack of output because the "System/Preferences/Sound" control panel seems to only consider card "0" to be the default, even if you change it.
When having more than one soundcard, it often appears that one card is one time the default device, other times it's an other one.  This has led to a lack of output because the "System/Preferences/Sound" control panel seems to only consider card "0" to be the default, even if you change it.
So, to make a long story short, you can ensure that one of your sound-devices is always "0" with this small modification:
So, to make a long story short, you can ensure that one of your sound-devices is always "0" with this small modification:
Edit the following file with your favorite editor, e.g:
Edit the following file with your favorite editor, e.g,
For Hardy LTS:
<pre><nowiki>
<pre><nowiki>
sudo gedit /etc/modprobe.d/alsa-base
sudo gedit /etc/modprobe.d/alsa-base
</nowiki></pre>
For Karmic:
<pre><nowiki>
sudo gedit /etc/modprobe.d/alsa-base.conf
</nowiki></pre>
</nowiki></pre>
and append this to the bottom of the file, making adjustments as required for your setup, see example below:
and append this to the bottom of the file, making adjustments as required for your setup, see example below:
<pre><nowiki>
<pre><nowiki>
options snd-usb-audio index=-2
options snd_hda-intel index=0
options snd_hda-intel index=0
options snd_indigoio index=1
options snd_indigoio index=1
第94行: 第103行:
#etc...
#etc...
</nowiki></pre>
</nowiki></pre>
Where "foo" is the name of the alsa driver for the soundcard (pci or usb, audio or midi).
Where "foo" is the name of the alsa driver for the soundcard (pci or usb, audio or midi). Not Firewire!
To find the name of your sound card driver, go there :
http://alsa-project.org/main/index.php/Matrix:Main
=== ALSA Sequencer ===
If you can not have midi sequencing enabled, or if you have midi error message, the Alsa midi sequencer module of the kernel may not be loaded. Try that:
<pre><nowiki>
sudo modprobe snd-seq
</nowiki></pre>
If it works, to have your system load it at bootup, you have to add it to the /etc/modules file, do:
<pre><nowiki>
sudo su -c 'echo snd-seq >> /etc/modules'
</nowiki></pre>
=== Disabling PulseAudio ===
The QjackCtl application will automatically suspend PulseAudio but it is also possible to disable PulseAudio all together. The two steps to disable PulseAudio for your session:
* Create the file ''~/.pulse/client.conf'' with the following terminal command:
<pre><nowiki>
echo "autospawn = no" > ~/.pulse/client.conf
</nowiki></pre>
* Create a new Startup Application that will kill PulseAudio when your session is started. Open System - Preferences - Startup Applications. Add a new entry by clicking the add button and enter <code><nowiki>pulseaudio -k</nowiki></code> in the command field.
=== Firewire (ieee1394 / raw1394) sound cards and cameras ===
'''''With the new Firewire stack in Ubuntu Kernel, at the moment, it is not possible to run FFADO supported sound cards with -generic and -lowlatency kernels. Please see instructions on this page to install -rt kernel wich has old stack. So this section needs a complete rewrite.'''''
If you can't get your Firewire sound card working with Freebob/FFADO and Jack, please first of all have a look at http://ffado.org/?q=devicesupport/list and check if your sound card is supported.
First of all, install the -rt kernel if didn't do it upper, add yourself to the video group:
<pre><nowiki>
sudo adduser <username> video
</nowiki></pre>
Think to change <username>.
Then, you have to give the access right to "/dev/raw1394" to the "video" group You need to edit/create a configuration text file:
<pre><nowiki>
sudo gedit /etc/udev/rules.d/65-permission-raw.rules
</nowiki></pre>
And make a copy/paste of this into the file:
<pre><nowiki>
KERNEL=="raw1394", OWNER="root", GROUP="video", MODE="660"
</nowiki></pre>
Restart the workstation is necessary to get the acces right.
In Karmic and Lucid Beta, install then the ffado utils:
<pre><nowiki>
sudo apt-get install ffado-dbus-server ffado-mixer-qt4 ffado-tools libffado1
</nowiki></pre>
NB: it may cause a security problem if you are using ieee1394 for other than hard disk, camera or sound card connection, but for exemple with ieee1394 networking.
You will have to run one time with the sound card "on" before starting the workstation, in order to confirm right access. Then it is not necessary anymore.
In Qjackctl setup, choose in the "Driver" list "freebob" if you are in Hardy, and "firewire" if you are using Karmic and Lucid Beta. In the "Interface" list, choose "hw:0".
In Karmic, you may need to install "a2jmidid" package. This application allows you to make connections between alsa-midi and jack-midi peripherals. The new FFADO driver create now only jack-midi instance for the physical input and output of your firewire sound card. So if you are using them, you will need to launch "a2jmidid" in a terminal, or to add this command line to the Qjackctl start option to be launched automatically. So you can connect your midi applications to the physical input and output of the firewire sound card.
You can find some GUI tools and howto on the Ubuntu Studio [[UbuntuHelp:FireWire|FireWire Audio]] documentation. However, take care using the Ubuntu Studio Control Gui, it is very buggy.
=== Unofficial Backports ===
In Lucid Beta, thanks to the launchpad community and to the work of other variant of Ubuntu for Multimedia production, you may find a lot stuff in PPAs.
There is one we recommend to install to have fresh and stable backports like Ardour VST, jack 2, and updated versions of a lot of softwares. Add this line in Synaptic in the "Third party software reposiroty" list:
<pre><nowiki>
ppa:falk-t-j/lucid
</nowiki></pre>
More information available at https://launchpad.net/~falk-t-j/+archive/lucid
In order to get the latest -lowlatency and -rt kernels, please add this in Synaptic:
<pre><nowiki>
ppa:abogani/ppa
</nowiki></pre>
With all that, you will have almost all codecs, libraries, application, etc... available and updated for GNU/Linux in Ubuntu Lucid. So, think to update with apt-get or Synaptic !!!
=== PulseAudio and Jack ===
Thanks to the KXstudio team, a way to have Pulse Audio sound in Jack is available, very simply. It's so great to have Firefox (Jiwa, Youtube, etc...), Totem, etc... sounding on your favorite sound card.
First of all, install the backports repositories if you didn't. Then install the pulse-jack package, do:
<pre><nowiki>
sudo apt-get update
sudo apt-get install pulse-jack
</nowiki></pre>
This package install a very usefull utility wich will connect Pulse Audio to Jack once it is started. You may want to add the "pulse-jack" command in the Jack Control preferences, so it will be auto-launched after jackd start.
=== Getting it All Going ===
=== Getting it All Going ===
First, you will want to launch Qjack``Ctl by itself, and configure it for your soundcard. Follow the [[UbuntuHelp:HowToJACKConfiguration]] page if you need help.
First, you will want to launch Jack Control, and configure it for your soundcard. Follow the [[UbuntuHelp:HowToJACKConfiguration|HowToJACKConfiguration]] page if you need help.
Next, we recommend you have a read through the [[UbuntuHelp:HowToQjackCtlConnections]] tutorial, which is used to quickly connect the various applications and it should give you a grasp of the concept behind JACK and how modular the Linux audio world is.
Next, we recommend you to use Patchage to connect applications within them and with hardware I/O (audio and midi), as you want.
Once you understand how JACK connections work, you might like to follow a tutorial on composing a basic song with Seq24. Check that out here: [[UbuntuHelp:HowToSeq24Introduction]].
=== Comments ===
=== Comments ===
* It is just an update of the Gutsy page for Hardy, which is now better for multimedia production. Don't hesitate to come on #ubuntustudio if you have any question, or you want to help. You can write to the Ubuntu Studio devel mailing list too. ttoine
* It is just an update of the original Gutsy page for Lucid LTS.
* This page is aimed to be a reference of tweaks and steps for setting up a multimedia workstation from a standard Ubuntu installation. I and others are doing their best, testing with our available hardware, to provide the best information available as possible. In order to be the more and more complete and stable, if you find something wrong, feel free to correct it. In the same way, you can add good infos once you are sure it works well. Please, think to respect the layout. ttoine
* Don't hesitate to come on #ubuntustudio on freenode's irc if you have any question, or you want to help. You can write to the [[UbuntuHelp:UbuntuStudio|UbuntuStudio]] devel mailing list too.
* If you want to add tips for an application, this is not the right place. Please create a new page or fill the page dedicated to this software in the [[UbuntuHelp:UbuntuStudio|UbuntuStudio]] pages of the wiki
----
[[UbuntuHelp:UbuntuStudioPreparation/Discuss|Discuss]] this page
----
[[category:CategoryAudio]]


[[category:UbuntuHelp]]
[[category:UbuntuHelp]]

2010年5月20日 (四) 00:36的最新版本

{{#ifexist: :UbuntuStudioPreparation/zh | | {{#ifexist: UbuntuStudioPreparation/zh | | {{#ifeq: {{#titleparts:UbuntuStudioPreparation|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:UbuntuStudioPreparation|1|-1|}} | zh | | }}


You will find on this page what to do if you want to setup a multimedia production workstation with a standard Ubuntu installation (means without installing Ubuntu Studio).


However, users with Firewire hardware, pci professional sound card, even on Ubuntu Studio, or simply having questions, may find tips on this page. First of all, be sure to have the multiverse, universe, main and restricted repositories activated in Synaptic. Everything on this page has been tested and works successfully with Ubuntu Lucid LTS Beta. As Lucid is at a beta stage, it may be some mistakes or bugs in this page. Please note that only LTS and current version will be documented in time on this tutorial.

Install the "must have" packages

If you prefer to install the packages with Synaptic, you can.

The basics

If you are still unsure of which you would like to use, or where to start, a sane set of defaults can be installed by doing this:

sudo apt-get install ardour audacious hydrogen jackd jack-rack qjackctl seq24 vkeybd zynaddsubfx patchage vlc kino pitivi acidrip ubuntu-restricted-extras ubuntustudio-menu gcdmaster

Ardour is a very good audio recorder and sequencer, Audacious a music player with plugin for jackd, seq24 is a midi sequencer, vkeybd is a virtual midi keyboard, zynaddsubfx a very good modular synth, hydrogen is a drum kit and sequencing application, jackd is the sound daemon and qjackctl is to setup it well with a GUI, patchage is a very useful application to patch audio/midi applications and the I/O, gcdmaster allows creation of a master audio cd.

Specific Pci and USB hardware

First of all, check on this page if your card is supported : http://alsa-project.org/main/index.php/Matrix:Main If your card is said to be supported, but you know it is a low latency sound card, install the Medibuntu repository and do:

sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui alsa-firmware

Informations about Medibuntu and how to add it can be found here: http://www.medibuntu.org/ Your card will work at reboot. For card like RME hdsp, you may want to run manually the command line "hdsploader". Feel free of course to create a shortcut in your menu or Gnome panel.

Effect Plugins, Instruments and Codecs

Install the LADSPA plugins so you get some effect plugins for your audio applications to use. For audio processing:

sudo apt-get install blop caps cmt fil-plugins rev-plugins swh-plugins tap-plugins

For synthesizers:

sudo apt-get install blepvco mcp-plugins omins

Install the DSSI host and plugins:

sudo apt-get install dssi-host-jack dssi-example-plugins fluidsynth-dssi hexter xsynth-dssi

More infos are provided below, see the "VST Instruments" section. Install the video codecs:

sudo apt-get install gstreamer0.10-plugins-good gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse gstreamer0.10-plugins-ugly gstreamer0.10-plugins-ugly-multiverse ffmpeg

If you use the Medibuntu repository, you can add other codecs, and encrypted DVD support to Ubuntu:

sudo apt-get install non-free-codecs libdvdcss2

Please see http://medibuntu.org for more information. Think to update, because Medibuntu may provide more complete version of VLC, Mplayer, Mencoder, etc...

VST Instruments

For licence purpose (Steinberg licence for VST and VSTi are not fully compliant with GPL, and so are a bit restricted) it is not officialy possible to use VST and VSTi under Ubuntu at the moment. See the instructions in the "Backports" section for more informations, if you really need them.

Real-Time Support

You may want to enable the real time support if you work at very low latency (less than 10ms), producing audio or using virtual instruments in "live performance". All you have to do for this is give your "audio" group permissions to access the rtprio, and memlock limits. To do this, you just need to run these commands, which will add some lines to the file /etc/security/limits.conf and add you to the audio user group.:

sudo su -c 'echo @audio - rtprio 99 >> /etc/security/limits.conf'
sudo su -c 'echo @audio - memlock unlimited >> /etc/security/limits.conf'
sudo adduser <username> audio

Of course, think to replace <username>. These value are suggested by http://jackaudio.org/faq. The memlock line determines how much of your memory can be locked by audio processes. Some recommend setting this as half of your total memory (RAM, in KB). See Florian Paul Schmidt's page. Note: Modifying /etc/security/limits.conf Should Not Be Required Anymore <
>
Beginning with the Ubuntu package jack-audio-connection-kit-0.118+svn3796-1ubuntu2 editing of /etc/security/limits.conf should not be required. JACK will write the following during post-installation to /etc/security/limits.d/audio.conf:

  1. generated by jackd's postinst. <
    >
  2. Do not edit this file by hand, use <
    >
  3. dpkg-reconfigure -p high jack <
    >
  4. instead <
    >

@audio - rtprio 99 <
> @audio - memlock unlimited <
>

  1. @audio - nice -19 <
    >

Please note that creating or modifying /etc/security/limits.conf may cause conflicts with the JACK written /etc/security/limits.d/audio.conf settings. Email from Linux Audio Users mailing list: http://linuxaudio.org/mailarchive/lau/2010/3/5/166428 <
> Debian Bug #507248: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507248 <
> -- Scott Lavender 4/25/10 Then, you may want to install the -lowlatency kernel, you can simply do:

 sudo apt-get install linux-lowlatency linux-headers-lowlatency

If you still experience Xruns or you have a firewire sound card supported by the FFADO project, you may want to install the -rt kernel:

 sudo apt-get install linux-rt linux-headers-rt

Take care, with some nVidia or AMD/ATI graphic card, the -rt and -lowlatency kernels may not work well with restricted driver. Always keep a -generic kernel on your Grub list. If for some reason you can't boot with the -rt kernel, it will be very usefull. Restart Ubuntu, and it should be enabled. You may need to edit Grub preferences to choose the default boot kernel.

Configuration of more than one pci/usb sound/midi card/keyboard/control surface

When having more than one soundcard, it often appears that one card is one time the default device, other times it's an other one. This has led to a lack of output because the "System/Preferences/Sound" control panel seems to only consider card "0" to be the default, even if you change it. So, to make a long story short, you can ensure that one of your sound-devices is always "0" with this small modification: Edit the following file with your favorite editor, e.g, For Hardy LTS:

sudo gedit /etc/modprobe.d/alsa-base

For Karmic:

sudo gedit /etc/modprobe.d/alsa-base.conf

and append this to the bottom of the file, making adjustments as required for your setup, see example below:

options snd_hda-intel index=0
options snd_indigoio index=1
options snd_hdsp index=2
options snd_foo index=3
#etc...

Where "foo" is the name of the alsa driver for the soundcard (pci or usb, audio or midi). Not Firewire! To find the name of your sound card driver, go there : http://alsa-project.org/main/index.php/Matrix:Main

ALSA Sequencer

If you can not have midi sequencing enabled, or if you have midi error message, the Alsa midi sequencer module of the kernel may not be loaded. Try that:

 sudo modprobe snd-seq

If it works, to have your system load it at bootup, you have to add it to the /etc/modules file, do:

 sudo su -c 'echo snd-seq >> /etc/modules'

Disabling PulseAudio

The QjackCtl application will automatically suspend PulseAudio but it is also possible to disable PulseAudio all together. The two steps to disable PulseAudio for your session:

  • Create the file ~/.pulse/client.conf with the following terminal command:
 echo "autospawn = no" > ~/.pulse/client.conf
  • Create a new Startup Application that will kill PulseAudio when your session is started. Open System - Preferences - Startup Applications. Add a new entry by clicking the add button and enter pulseaudio -k in the command field.

Firewire (ieee1394 / raw1394) sound cards and cameras

With the new Firewire stack in Ubuntu Kernel, at the moment, it is not possible to run FFADO supported sound cards with -generic and -lowlatency kernels. Please see instructions on this page to install -rt kernel wich has old stack. So this section needs a complete rewrite. If you can't get your Firewire sound card working with Freebob/FFADO and Jack, please first of all have a look at http://ffado.org/?q=devicesupport/list and check if your sound card is supported. First of all, install the -rt kernel if didn't do it upper, add yourself to the video group:

 sudo adduser <username> video

Think to change <username>. Then, you have to give the access right to "/dev/raw1394" to the "video" group You need to edit/create a configuration text file:

sudo gedit /etc/udev/rules.d/65-permission-raw.rules

And make a copy/paste of this into the file:

KERNEL=="raw1394", OWNER="root", GROUP="video", MODE="660"

Restart the workstation is necessary to get the acces right. In Karmic and Lucid Beta, install then the ffado utils:

sudo apt-get install ffado-dbus-server ffado-mixer-qt4 ffado-tools libffado1

NB: it may cause a security problem if you are using ieee1394 for other than hard disk, camera or sound card connection, but for exemple with ieee1394 networking. You will have to run one time with the sound card "on" before starting the workstation, in order to confirm right access. Then it is not necessary anymore. In Qjackctl setup, choose in the "Driver" list "freebob" if you are in Hardy, and "firewire" if you are using Karmic and Lucid Beta. In the "Interface" list, choose "hw:0". In Karmic, you may need to install "a2jmidid" package. This application allows you to make connections between alsa-midi and jack-midi peripherals. The new FFADO driver create now only jack-midi instance for the physical input and output of your firewire sound card. So if you are using them, you will need to launch "a2jmidid" in a terminal, or to add this command line to the Qjackctl start option to be launched automatically. So you can connect your midi applications to the physical input and output of the firewire sound card. You can find some GUI tools and howto on the Ubuntu Studio FireWire Audio documentation. However, take care using the Ubuntu Studio Control Gui, it is very buggy.

Unofficial Backports

In Lucid Beta, thanks to the launchpad community and to the work of other variant of Ubuntu for Multimedia production, you may find a lot stuff in PPAs. There is one we recommend to install to have fresh and stable backports like Ardour VST, jack 2, and updated versions of a lot of softwares. Add this line in Synaptic in the "Third party software reposiroty" list:

ppa:falk-t-j/lucid

More information available at https://launchpad.net/~falk-t-j/+archive/lucid In order to get the latest -lowlatency and -rt kernels, please add this in Synaptic:

ppa:abogani/ppa

With all that, you will have almost all codecs, libraries, application, etc... available and updated for GNU/Linux in Ubuntu Lucid. So, think to update with apt-get or Synaptic !!!

PulseAudio and Jack

Thanks to the KXstudio team, a way to have Pulse Audio sound in Jack is available, very simply. It's so great to have Firefox (Jiwa, Youtube, etc...), Totem, etc... sounding on your favorite sound card. First of all, install the backports repositories if you didn't. Then install the pulse-jack package, do:

sudo apt-get update
sudo apt-get install pulse-jack

This package install a very usefull utility wich will connect Pulse Audio to Jack once it is started. You may want to add the "pulse-jack" command in the Jack Control preferences, so it will be auto-launched after jackd start.

Getting it All Going

First, you will want to launch Jack Control, and configure it for your soundcard. Follow the HowToJACKConfiguration page if you need help. Next, we recommend you to use Patchage to connect applications within them and with hardware I/O (audio and midi), as you want.

Comments

  • It is just an update of the original Gutsy page for Lucid LTS.
  • This page is aimed to be a reference of tweaks and steps for setting up a multimedia workstation from a standard Ubuntu installation. I and others are doing their best, testing with our available hardware, to provide the best information available as possible. In order to be the more and more complete and stable, if you find something wrong, feel free to correct it. In the same way, you can add good infos once you are sure it works well. Please, think to respect the layout. ttoine
  • Don't hesitate to come on #ubuntustudio on freenode's irc if you have any question, or you want to help. You can write to the UbuntuStudio devel mailing list too.
  • If you want to add tips for an application, this is not the right place. Please create a new page or fill the page dedicated to this software in the UbuntuStudio pages of the wiki

Discuss this page