“UbuntuHelp:Nomadii”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
(未显示同一用户的3个中间版本) | |||
第5行: | 第5行: | ||
Instructions for Ubuntu 7.04 Feisty Fawn | Instructions for Ubuntu 7.04 Feisty Fawn | ||
==== Steps ==== | ==== Steps ==== | ||
− | + | <ol><li>Download nomadII-utils from: [http://prdownloads.sourceforge.net/nomadii/nomadII-utils-0.8-2.i386.rpm] | |
− | + | </li><li>You will need ''alien'' to convert the .rpm package into a .deb one<pre><nowiki> | |
sudo apt-get install alien | sudo apt-get install alien | ||
sudo alien nomadII-utils-0.8-2.i386.rpm | sudo alien nomadII-utils-0.8-2.i386.rpm | ||
</nowiki></pre> | </nowiki></pre> | ||
− | + | </li><li>Install nomadII-utils: <pre><nowiki> | |
sudo dpkg -i nomadii-utils_0.8-3_i386.deb | sudo dpkg -i nomadii-utils_0.8-3_i386.deb | ||
</nowiki></pre> | </nowiki></pre> | ||
− | + | </li><li>You must create a symbolic link in order to help nomadii-utils find the libreadline library: <pre><nowiki> | |
sudo ln -s /lib/libreadline.so.5 /lib/libreadline.so.4 | sudo ln -s /lib/libreadline.so.5 /lib/libreadline.so.4 | ||
</nowiki></pre> | </nowiki></pre> | ||
− | + | </li><li>Nomadii-utils needs termcap compatibility. Download the following packages and place them in the same folder: [http://old-releases.ubuntu.com/ubuntu/pool/universe/t/termcap-compat/termcap-compat_1.2.3_i386.deb termcap-compat] [http://old-releases.ubuntu.com/ubuntu/pool/universe/libc/libc/libc5_5.4.46-15_i386.deb libc5] [http://old-releases.ubuntu.com/ubuntu/pool/universe/l/ld.so/ldso_1.9.11-15_i386.deb ldso] | |
− | + | </li><li>Install termcap-compat: <pre><nowiki> | |
sudo dpkg -i ldso_1.9.11-15_i386.deb | sudo dpkg -i ldso_1.9.11-15_i386.deb | ||
sudo dpkg -i libc5_5.4.46-15_i386.deb | sudo dpkg -i libc5_5.4.46-15_i386.deb | ||
sudo dpkg -i termcap-compat_1.2.3_i386.deb | sudo dpkg -i termcap-compat_1.2.3_i386.deb | ||
</nowiki></pre> | </nowiki></pre> | ||
− | + | </li><li>Connect your Nomad II device. | |
− | + | </li><li>Run nomadii-utils executable ('''not''' as root): <pre><nowiki> | |
nomadii | nomadii | ||
</nowiki></pre> | </nowiki></pre> | ||
− | + | </li><li>Type ''help'' at the nomad prompt to get a list of useful commands.</li></ol> | |
+ | |||
+ | === Ubuntu 7.10 === | ||
+ | Instructions for Ubuntu 7.10 Gutsy Gibbon | ||
+ | '''usbfs''' is not activated by default in Gutsy. After the instructions above, follow these extra steps: | ||
+ | <pre><nowiki> | ||
+ | sudo nano -w /etc/init.d/mountdevsubfs.sh | ||
+ | </nowiki></pre> | ||
+ | Find the following lines: | ||
+ | <pre><nowiki> | ||
+ | #mkdir -p /dev/bus/usb/.usbfs | ||
+ | #domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 | ||
+ | #ln -s .usbfs/devices /dev/bus/usb/devices | ||
+ | #mount --rbind /dev/bus/usb /proc/bus/usb | ||
+ | </nowiki></pre> | ||
+ | Uncomment them so that look like this:<pre><nowiki> | ||
+ | mkdir -p /dev/bus/usb/.usbfs | ||
+ | domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 | ||
+ | ln -s .usbfs/devices /dev/bus/usb/devices | ||
+ | mount --rbind /dev/bus/usb /proc/bus/usb | ||
+ | </nowiki></pre> | ||
+ | Press ''Ctrl+X'' to exit and save the changes. | ||
+ | Start mountdevsubfs:<pre><nowiki> | ||
+ | sudo /etc/init.d/mountdevsubfs.sh start | ||
+ | </nowiki></pre> | ||
+ | Done. You can run ''nomadii'' now. | ||
==== Kubuntu users ==== | ==== Kubuntu users ==== | ||
Check this out: [http://www.kde-apps.org/content/show.php?content=17624 Nomad II KDE Transfer Service Menu] | Check this out: [http://www.kde-apps.org/content/show.php?content=17624 Nomad II KDE Transfer Service Menu] | ||
第33行: | 第58行: | ||
* [http://nomadii.sourceforge.net/ Nomad II Linux Driver] | * [http://nomadii.sourceforge.net/ Nomad II Linux Driver] | ||
* [http://ubuntuforums.org/archive/index.php/t-44886.html Ubuntu Forums] | * [http://ubuntuforums.org/archive/index.php/t-44886.html Ubuntu Forums] | ||
+ | * [https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/151585 Bug #151585] | ||
---- | ---- | ||
− | [[category: | + | [[category:CategoryAudio]] [[category:CategoryHardware]] |
[[category:UbuntuHelp]] | [[category:UbuntuHelp]] |
2008年10月20日 (一) 00:11的最新版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
- title How to make your Nomad II work on Ubuntu
Ubuntu 7.04
Instructions for Ubuntu 7.04 Feisty Fawn
Steps
- Download nomadII-utils from: [1]
- You will need alien to convert the .rpm package into a .deb one
sudo apt-get install alien sudo alien nomadII-utils-0.8-2.i386.rpm
- Install nomadII-utils:
sudo dpkg -i nomadii-utils_0.8-3_i386.deb
- You must create a symbolic link in order to help nomadii-utils find the libreadline library:
sudo ln -s /lib/libreadline.so.5 /lib/libreadline.so.4
- Nomadii-utils needs termcap compatibility. Download the following packages and place them in the same folder: termcap-compat libc5 ldso
- Install termcap-compat:
sudo dpkg -i ldso_1.9.11-15_i386.deb sudo dpkg -i libc5_5.4.46-15_i386.deb sudo dpkg -i termcap-compat_1.2.3_i386.deb
- Connect your Nomad II device.
- Run nomadii-utils executable (not as root):
nomadii
- Type help at the nomad prompt to get a list of useful commands.
Ubuntu 7.10
Instructions for Ubuntu 7.10 Gutsy Gibbon usbfs is not activated by default in Gutsy. After the instructions above, follow these extra steps:
sudo nano -w /etc/init.d/mountdevsubfs.sh
Find the following lines:
#mkdir -p /dev/bus/usb/.usbfs #domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 #ln -s .usbfs/devices /dev/bus/usb/devices #mount --rbind /dev/bus/usb /proc/bus/usbUncomment them so that look like this:
mkdir -p /dev/bus/usb/.usbfs domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 ln -s .usbfs/devices /dev/bus/usb/devices mount --rbind /dev/bus/usb /proc/bus/usb
Press Ctrl+X to exit and save the changes.
Start mountdevsubfs:sudo /etc/init.d/mountdevsubfs.sh start
Done. You can run nomadii now.
Kubuntu users
Check this out: Nomad II KDE Transfer Service Menu
References: