“UbuntuHelp:WifiDocs/LinksysWPC54G”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第3行: | 第3行: | ||
'''This How To explains the setup of Linksys cards that require the ndiswrapper module.''' | '''This How To explains the setup of Linksys cards that require the ndiswrapper module.''' | ||
Follow these steps: | Follow these steps: | ||
− | + | <ol><li>Link to ndis page Ndiswrapper</li></ol> | |
+ | |||
These instructions for Debian have been helpful for several people configuring linksys cards Arthur's homepage: [http://ch.tudelft.nl/~arthur/wpc54g/ using WPC54G with Debian] | These instructions for Debian have been helpful for several people configuring linksys cards Arthur's homepage: [http://ch.tudelft.nl/~arthur/wpc54g/ using WPC54G with Debian] | ||
− | + | <ol><li>The Linksys WPC11 ver 4 is a confirmed success. | |
− | + | </li><li>In one case at least, manually entering nameserver information into /etc/resolv.conf was required.</li></ol> | |
+ | |||
Here is a step-by-step instruction, which workes very well on IBM Thinkpad with WPC54GS (BMC Chipset) card: | Here is a step-by-step instruction, which workes very well on IBM Thinkpad with WPC54GS (BMC Chipset) card: | ||
First, download [http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c%3DL_Product_C2%26cid%3D1115416827032&pagename=Linksys%2FCommon%2FVisitorWrapper the unfree drivers]. Unzip the drivers somewhere in your home-directory. | First, download [http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c%3DL_Product_C2%26cid%3D1115416827032&pagename=Linksys%2FCommon%2FVisitorWrapper the unfree drivers]. Unzip the drivers somewhere in your home-directory. |
2007年12月6日 (四) 15:51的版本
点击翻译: |
English |
请不要直接编辑翻译本页,本页将定期与来源同步。 |
This How To explains the setup of Linksys cards that require the ndiswrapper module. Follow these steps:
- Link to ndis page Ndiswrapper
These instructions for Debian have been helpful for several people configuring linksys cards Arthur's homepage: using WPC54G with Debian
- The Linksys WPC11 ver 4 is a confirmed success.
- In one case at least, manually entering nameserver information into /etc/resolv.conf was required.
Here is a step-by-step instruction, which workes very well on IBM Thinkpad with WPC54GS (BMC Chipset) card: First, download the unfree drivers. Unzip the drivers somewhere in your home-directory. Then install bcm43xx-fwcutter and use it to get the firmware stuff needed for ndiswrapper:
apt-get install bcm43xx-fwcutter ndiswrapper-utils-1.8 ndiswrapper-common cd ~/windows_drivers/ bcm43xx-fwcutter bcmwl5.sys cp bcm43xx* /lib/firmware modprobe ndiswrapper ndiswrapper -i bcmwl5.inf ndiswrapper -l
Depending on the driver package used, bcmwl5.inf and bcmwl5.sys can be on different places in the subdirectories... should show the following:
bcmwl5 driver installed, hardware present
Then edit /etc/network/interfaces to contain the following. Alternatively you can just use the gnome or kde configuration tools:
auto eth1 iface eth1 inet dhcp wireless-essid linksysgabba wireless-key 0A0A0A0A0A0A0A0A0A0A0A
Of course you use your ESSID and WEP-KEY then ;-) As next, you take up the interface:
ifdown eth0 ifdown eth1 ifup eth1
Wait until dhcp gets it's stuff and then test it (browse google)