“UbuntuHelp:Asus P7131 Dual”的版本间的差异
来自Ubuntu中文
小 |
小 |
||
第4行: | 第4行: | ||
=== Note === | === Note === | ||
This information was written for Ubuntu 6.06 (Dapper Drake). | This information was written for Ubuntu 6.06 (Dapper Drake). | ||
− | |||
=== Disclaimer === | === Disclaimer === | ||
I'm a real newbie on both linux and ubuntu, so please feel free to correct any mistakes that exist in this page. | I'm a real newbie on both linux and ubuntu, so please feel free to correct any mistakes that exist in this page. | ||
− | |||
=== Drivers === | === Drivers === | ||
Drivers for this card are available with the ubuntu installation but, at least in my case, the drivers were too | Drivers for this card are available with the ubuntu installation but, at least in my case, the drivers were too | ||
old to be able to scan channels correctly. | old to be able to scan channels correctly. | ||
I compiled the latest and greatest from linuxtv.org. A description of how to do that can be found here: | I compiled the latest and greatest from linuxtv.org. A description of how to do that can be found here: | ||
− | |||
[http://www.linuxtv.org/wiki/index.php/How_to_install_DVB#Solution_with_v4l_manual_installation] | [http://www.linuxtv.org/wiki/index.php/How_to_install_DVB#Solution_with_v4l_manual_installation] | ||
− | |||
If there is a problem saying "error: sound_config.h: No such file or directory", you need to: | If there is a problem saying "error: sound_config.h: No such file or directory", you need to: | ||
<pre><nowiki> | <pre><nowiki> | ||
第20行: | 第16行: | ||
</nowiki></pre> | </nowiki></pre> | ||
and disable the aci option under audio settings. | and disable the aci option under audio settings. | ||
− | |||
Reboot the system and load the new fresh drivers. | Reboot the system and load the new fresh drivers. | ||
<pre><nowiki> | <pre><nowiki> | ||
modprobe saa7134_dvb | modprobe saa7134_dvb | ||
</nowiki></pre> | </nowiki></pre> | ||
− | |||
=== Use the analog (cable) input === | === Use the analog (cable) input === | ||
To my surprise the antenna should be plugged into the '''analog''' input, instead of the digital. | To my surprise the antenna should be plugged into the '''analog''' input, instead of the digital. | ||
− | |||
This seems to be a result of the driver having difficulties switching inputs for TV. | This seems to be a result of the driver having difficulties switching inputs for TV. | ||
− | |||
There is probably no physical difference between them, but this removes the option for separate analog and digital antennas. | There is probably no physical difference between them, but this removes the option for separate analog and digital antennas. | ||
− | |||
=== Further testing === | === Further testing === | ||
Now is the time to verify that you can scan and receive media from the card. Follow the instructions at: | Now is the time to verify that you can scan and receive media from the card. Follow the instructions at: | ||
− | |||
[http://www.linuxtv.org/wiki/index.php/First_steps_with_a_DVB_card] | [http://www.linuxtv.org/wiki/index.php/First_steps_with_a_DVB_card] | ||
[[category:UbuntuHelp]] | [[category:UbuntuHelp]] |
2007年11月30日 (五) 16:09的版本
点击翻译: |
English |
DVB
Note
This information was written for Ubuntu 6.06 (Dapper Drake).
Disclaimer
I'm a real newbie on both linux and ubuntu, so please feel free to correct any mistakes that exist in this page.
Drivers
Drivers for this card are available with the ubuntu installation but, at least in my case, the drivers were too old to be able to scan channels correctly. I compiled the latest and greatest from linuxtv.org. A description of how to do that can be found here: [1] If there is a problem saying "error: sound_config.h: No such file or directory", you need to:
make menuconfig
and disable the aci option under audio settings. Reboot the system and load the new fresh drivers.
modprobe saa7134_dvb
Use the analog (cable) input
To my surprise the antenna should be plugged into the analog input, instead of the digital. This seems to be a result of the driver having difficulties switching inputs for TV. There is probably no physical difference between them, but this removes the option for separate analog and digital antennas.
Further testing
Now is the time to verify that you can scan and receive media from the card. Follow the instructions at: [2]