特殊:Badtitle/NS100:BluetoothAudio/zh:修订间差异

来自Ubuntu中文
跳到导航跳到搜索
不死怨灵留言 | 贡献
不死怨灵留言 | 贡献
第4行: 第4行:
= 蓝牙音频概况 =
= 蓝牙音频概况 =
使用蓝牙时有两种不同的音频配置方案,使用哪一个取决于你将如何使用你的耳机以及你如何计划使用它。 "sco" 音频配置是一个低品质、低延时的连接方案。音质近似于无线电话。糟糕的音质在听音乐的时候显得尤为明显。"a2d" 音频配置是一个高品质的压缩连接,并且提供出色的音频品质。截止到2007年7月13日a2d音频驱动无法通过apt获取,而是需要手动编译安装。这是首选的蓝牙音频配置方案。
使用蓝牙时有两种不同的音频配置方案,使用哪一个取决于你将如何使用你的耳机以及你如何计划使用它。 "sco" 音频配置是一个低品质、低延时的连接方案。音质近似于无线电话。糟糕的音质在听音乐的时候显得尤为明显。"a2d" 音频配置是一个高品质的压缩连接,并且提供出色的音频品质。截止到2007年7月13日a2d音频驱动无法通过apt获取,而是需要手动编译安装。这是首选的蓝牙音频配置方案。
=== 安装低品质"sco" 音频驱动程序 ===
注意:原作者已经停止维护此软件
===== 载入前提: =====
<pre><nowiki>
sudo apt-get install bluez-btsco
sudo modprobe snd-bt-sco
</nowiki></pre>
注意:如果你喜欢让这个模块在启动时被自动加载,运行'gksu gedit /etc/modules' 并加入一行:'snd-bt-sco'。
===== Determine the BT Address of the headset. =====
# Put the device into "Pairing" mode. This procedure varies by headset, but usually involves holding down the power button for 10-15 seconds.
# Open a terminal and run 'hcitool scan'
""Note: I am using my address '00:07:a4:b8:f9:77' for this example."" ""Please substitute your address from the hcitool scan output for the remaining steps.""
# Look for output like this.
ellie@ellie-laptop:~$ hcitool scan Scanning ... 00:07:A4:B8:F0:77 Motorola HT820 ellie@ellie-laptop:~$
# Edit /etc/bluetooth/hcid.conf (gksu gedit /etc/bluetooth/hcid.conf ) and add a section like this
device 00:07:A4:B8:F9:77 { name "Motorola HT820" auth enable; encrypt enable; }
# Restart Bluetooth services (sudo /etc/init.d/bluetooth restart)
===== Starting the "sco" driver for the first time. =====
# Place the Headset into "pairing" mode as above.
# Open a terminal and run 'btsco -v 00:07:a4:b8:f9:77'
# This should cause the gnome bluetooth manager to ask you for a pin number to pair. This is usually 0000 or 1234
===== Testing the "sco" driver. =====
aplay -B 1000000 -D plughw:Headset /usr/share/sounds/login.wav You should hear the Ubuntu Login sound.
===== Configuring btsco to run automatically at each boot. =====
# Open System -&gt; Preferences -&gt; Sessions and select "startup Programs"
# Click New.
# Enter "BT Sco Headset audio" for the Name.
# Enter '/usr/bin/btsco -r -f 00:07:a4:b8:f9:77'
# Click Ok and Apply
===== Setting the headset as your default alsa audio device. =====
asoundconf set-default-card Headset This will create the appropriate entries in your .asoundrc file. This setting is per-user.
=== Installing High quality "a2d" audio drivers ===
See [[http://bluetooth-alsa.sf.net/build.html new build docs]] for information on these drivers. There is a bluetooth-alsa package in the testing Debian apt repository, perhaps we can port it for gutsy?
=== Troubleshooting ===
The [[UbuntuHelp:BluetoothSkype|BluetoothSkype]]; page has additional information for configuring the new driver. See [[http://bluetooth-alsa.sf.net/contact.html Contact/troubleshooting]] for troubleshooting information.
----
[[Category:CategoryBluetooth]] [[Category:CategoryAudio]] [[Category:UbuntuHelp]]

2010年4月17日 (六) 16:35的版本

{{#ifexist: :BluetoothAudio/zh/zh | | {{#ifexist: BluetoothAudio/zh/zh | | {{#ifeq: {{#titleparts:BluetoothAudio/zh|1|-1|}} | zh | | }} }} }} {{#ifeq: {{#titleparts:BluetoothAudio/zh|1|-1|}} | zh | | }}

蓝牙音频概况

使用蓝牙时有两种不同的音频配置方案,使用哪一个取决于你将如何使用你的耳机以及你如何计划使用它。 "sco" 音频配置是一个低品质、低延时的连接方案。音质近似于无线电话。糟糕的音质在听音乐的时候显得尤为明显。"a2d" 音频配置是一个高品质的压缩连接,并且提供出色的音频品质。截止到2007年7月13日a2d音频驱动无法通过apt获取,而是需要手动编译安装。这是首选的蓝牙音频配置方案。