- title Windows Mobile
- 1 Windows Mobile
- 2 Windows Mobile 5, 6, 6.1
- 3 Direct Access Your Windows Mobile 5 or 6 SD card
- 4 Sync with an Online Calendar
- 5 Connecting to an Windows Mobile 2003 or PocketPC Device
- 6 Synchronizing with Evolution
- 7 Troubleshooting
- 8 Wireless Modem
- 9 Compatibilty
- 10 Troubleshooting
- 11 Comment
- 12 See also
Users of Windows Mobile 6, Windows Mobile 5, Windows Mobile 2003 and PocketPC can sync Contacts, Calendar, Tasks and Files.
Windows Mobile 5, 6, 6.1
The Synce project enables USB sync with your device under Hardy, Intrepid and Jaunty. Full instructions including repository and download information can be found on the Synce wiki. There are a number of steps which must be followed exactly in order to set up a partnership between Ubuntu and your device. See their site for full details. There are several specific options you must choose for your specifc setup, so read carefully. The Synce utilities work with both Gnome (using Evolution) and KDE (using Kontact).
Additional Functionality of the Synce Utilities
While no GUI has yet been developed, many of the basic functions of interface with the Windows Mobile 5 & 6 file system have been coded and may be used from the command line. Usage is "synce-pcode" (substitute pcode for one of the specific examples below)
* pcp Copy files * pls List directory contents * pmkdir Make directory * pmv Move (rename) files * prm Remove file * prmdir Remove an empty directory * prun Run a program * pstatus Display battery and storage space status about your device
to install a .cab file on your mobile device.
Direct Access Your Windows Mobile 5 or 6 SD card
Ubuntu does not currently support browsing a device's storage card directly. Until that support comes, there are two possible solutions:
- Using Windows Mobile 6's USB storage mode
- Using a storage device that your computer can also read, such an an SD card (if your computer has a card reader) or Sandisk's SD+USB for file transfer.
The program WM5torage (freely available) can be installed on your WM6 device, and upon connection with a computer your memory card is then mounted as a removable drive.
Sync with an Online Calendar
It is also possible to sync your WM6 calendar with an online calendar system, such as google calendar. The program OggSync does this for free, if you only have one category in your calendar. For syncing of more categories, you will have to buy the Pro version. Google has recently released [mobile synchronising software]. It claims to synchronise contacts and calendar events via Exchange ActiveSync. You can currently utilise the GCALDaemon software to synchronise Gmail contacts and google calendar events with ubuntu software such as kontact and evolution. In this way you can perform a three-way sync wirelessly - although you may incur a data charge for the mobile sync. For the future, there appears to be some development using akonadi to synchronise ubuntu with google. (Bluetooth? Wi-Fi?)
Connecting to an Windows Mobile 2003 or PocketPC Device
Plug in the device via the included USB cable.
- Install the synce-dccm, synce-serial and librra0-tools packages. To sync with Evolution, you'll also need the multisync, synce-multisync-plugin, libmultisync-plugin-evolution and libmultisync-plugin-backup packages. See Installing Software. The packages installer will ask various questions about how to connect to your device:
- Leave the serial interface as "/dev/ttyUSB0"
- Leave the default local IP address "192.168.131.102"
- Leave the default remote IP address "192.168.131.201"
- Set the IP address of your DNS server to "192.168.0.1"
- Make sure ports 5678, 5679 and 990 are not blocked by a firewall
- Click Applications -> Accessories -> Terminal. In the Terminal window, run:
dccm sudo synce-serial-start
Depending on your device you may have to run the sudo synce-serial-start command within a few seconds of powering the Windows Mobile device on. The computer should now show:
synce-serial-start is now waiting for your device to connect. The Windows Mobile Device should appear connected, in a similar way to when connected via ActiveSync on Windows.
Synchronizing with Evolution
- Click Applications -> Accessories -> Multisync
- Click New
- First plugin: SynCE Plugin
- Second plugin: Ximian Evolution 2
- Display Name: <whatever you what to call it>
- Data types to synchronize: Calendar + Addressbook + Tasks
- to disconnect the Windows Mobile device:
- Shutdown Multisync
- "killall -HUP dccm" to kill the serial connection.
- As a last resort, run "synce-serial-abort", if the above command doesn't work.
- If you forget to run "dccm" before synce-serial-start, power off the pocket pc and run
sudo rmmod ipaq sudo rmmod ehci_hcd sudo rmmod uhci_hcd sudo rmmod usbserial
Note: these must be run in a certain order, try a different order if it doesn't work.
- If syncronisation still doesn't work, close multisync and then run
synce-matchmaker create 1
If 1 doesn't work, try 2.
- If synce-serial-start is unable to find the file /etc/ppp/peers/synce-device then run the following and re-try
sudo synce-serial-config ttyUSB0
I have successfully used my XDA Exec as a wireless modem with my Laptop. This is how I got it to work(roughly) : 1. Start the Windows Mobile device in the wireless modem mode from Start-> Programs -> Wireless Modem 2. Now connect the USB cable to the computer. 3. In a Terminal, run
wvdialconfto see if it detects it as a modem. If this doesn't work, edit the "/etc/wvdial.conf" file as follows:
[Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 115200 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Carrier Check = no Stupid Mode = no Phone = *99# Username = Password = New PPPD = yes ISDN = 0 Modem Type = Analog Modem 6. Now type "wvdial" in the command prompt, it should now connect.
Devices that are known to work with this howto:
- HP iPaq hx4150
- HP iPaq rx3115
- HP iPaq h2215/h2210
- HP iPaq h1940
- HP iPaq h1930
- DELL Axim X3i & X30 & X50v
- XDA IIs
- i-mate JAM [windows ce 2003]
- Acer n50 Premium
- Samsung SPH-i700
- i-mate JAQ
- T-Mobile Dash (WM6)
- please add your devices to this list if it works for you
To check your Windows Mobile Device has been detected, click System' -> Administration -> System Log, then select messages.
dmesg in a terminal.
The results should look like the following:
[4312964.212000] usb 5-3.4: new full speed USB device using ehci_hcd and address 3 [4312966.410000] usbcore: registered new driver usbserial [4312966.416000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic [4312966.419000] usbcore: registered new driver usbserial_generic [4312966.419000] drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 [4312966.439000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA [4312966.439000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5 [4312966.443000] ipaq 5-3.4:1.0: PocketPC PDA converter detected [4312966.445000] usb 5-3.4: PocketPC PDA converter now attached to ttyUSB0 [4312966.445000] usbcore: registered new driver ipaq
1- STOP sl-modem-daemon :
PocketPC PDA ttyUSB1: PocketPC PDA converter now disconnected from ttyUSB1 ipaq 2-1:1.0: device disconnected
I find this is by sl-modem-daemon and I need to stop this to get it work!
- How can i use other ppp port like ppp1 not ppp0 like what the modem and pocket pc use now.
2- Show "Resync" button: from multisync options > show "Resync" button than use it to do sync it work with me like that 3-change the option on Ximian Evolution 2 -optional- to use address contact task from Evolution.
- SynCE - Linux USB HOWTO
- SynCE - Installation Guides
- HOWTO: Pocket PC Syncing with Evolution